Nikon Photo Scanner FH 869G User Manual

En  
Using the FH-869G Glass-Covered Holder for Brownie Film: A CAUTION  
The FH-835G is used when scanning medium-format (120/220) or 59 mm × 82 mm film for electron microscopes. The number of frames that can be  
scanned depends on the type of film; up to four frames for 6 × 4.5 film, up to three frames for 6 × 6 film, and up to two frames for 6 × 7–6 × 9 film.  
Glass  
cover  
Masking sheet  
Seal  
Sliding knob  
FH-869G Glass-Covered Holder for Brownie Film  
Newton’s rings (a radial interference pattern) may appear when scanning film that has been bent out of shape or otherwise distorted. To prevent such  
interference, attach seals to the matte emulsion surface of the film, between each pair of frames, with the exception of the first and second frames; then place  
the film on top of the masking sheet with the matte emulsion surface down (shiny surface up). Seals can be reused.  
Seals  
2
1
Masking sheet  
Matte emulsion  
surface  
Seals  
Turn the film over so that the seals face downwards before inserting the film  
Attach seals to the matte emulsion surface in between the frames to be  
scanned (except for the first and second frame).  
Set a masking sheet of appropriate size in the film holder.  
3
4
Exposed film  
Inner edge of masking sheet  
Film guides  
Place the film to be scanned in between the film guides, with the shiny  
surface facing up, and the matte emulsion surface (to which you attached  
the seals) facing down. Align the edge of the first exposure (not the  
unexposed portion at the very end of the film) with the inner edge of  
the masking sheet, as shown in the illustration.  
Lower the upper holders until they click into place.  
5
Cautions  
Use only one type of film at a time. Do not place negative and positive film in  
the holder at the same time.  
Be sure to align the end of the first frame of the film with the film line on the holder.  
Leaving a gap between the film and the line could interfere with accurate color  
reproduction.  
Direction of insertion  
Multiple single-frame strips of film can be inserted in the holder at the same  
time, but be sure not to mix positive and negative film.  
The glass in the lower portion of the holder has been treated to prevent inter-  
ference. Avoid leaving fingerprints or other stains on the glass.  
Insert the film holder in the direction of the arrow.  
Thumbnails are displayed in the thumbnail drawer in the scan window in  
the order shown below.  
To avoid damaging the film, use a blower to remove dust and lint from the film  
and holder. Leaving dust, lint, or other foreign objects on the film or holder  
during scanning could result in reduced image quality or in damage to the film.  
 

Miele Washer Premier 300 User Manual
MTD Edger 244 595 000 User Manual
Murray Lawn Mower 405005x99B User Manual
Musical Fidelity Stereo Amplifier X P200 User Manual
Nike Heart Rate Monitor HRM SDM User Manual
Nikon Camcorder D2H User Manual
NordicTrack Fitness Electronics Workout TV Console User Manual
Olympus Microcassette Recorder VN 1100 VN 1100PC User Manual
Onkyo Stereo Receiver HT R510 User Manual
Panasonic MP3 Player CQ C7401W User Manual