Newcon Optik Binoculars SIB 16X40 User Manual

Operation Manual  
SIB 16x40 GR  
BINOCULARS  
WITH IMAGE STABILIZATION  
In USA: 3310 Prospect Ave. Cleveland, OH 44115  
In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2 Canada  
NEWCON2002©  
Printed in Canada  
 
Features of the SIB 16x40 Gyro binoculars  
9. CUSTOMER SUPPORT  
Stabilized image  
Rigid construction  
Value priced 70% below competition  
Wealth of accessories  
Water Resistant  
Should you experience any difficulties with your Newcon  
OPTIK product, consult the enclosed manual. If the problem  
remains unresolved, contact our customer support department at  
(416) 663-6963 or Toll free at 1-877-398-6666. Our operating  
hours are 9am-5pm, Monday - Friday, Standard East Time.  
Night Vision eyepieces (optional)  
CONTENTS  
At no time should equipment be sent back to Newcon without  
following the instructions of our technical support  
department.  
1. Brief description  
2. Appearance of the device  
3. Technical characteristics  
4. Supplied accessories  
5. Operation instructions  
5.1. Preparing the device for operation without image  
stabilization  
5.2. Preparing the device for operation with image stabilization  
5.3. Preparing the device for operation from on-board source  
6. Storage and maintenance instructions  
7. Trouble shooting  
8. Warranty  
9. Customer Support  
Newcon accepts no responsibility for unauthorized returns.  
To locate NEWCON Authorized Dealer call:  
Tel: (416) 663-6963 Fax: (416) 663-9065  
INTERNET: http://WWW.NEWCON-OPTIK.COM  
The defective products should be shipped to:  
In USA: 3310 Prospect Ave. Cleveland, OH 44115  
In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2  
From international:  
1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2, CANADA  
10. Quality certificate  
3
14  
 
8. WARRANTY  
BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS!  
NEWCON OPTIK warrants this product against defects in  
material and workmanship for one year from the date of the  
original date of consumer's purchase, but no more than 18  
months from the date of manufacturing. Should your Newcon  
product prove defective during this period, please bring the  
product securely packaged in its original container or an  
equivalent, along with proof of the date of original purchase, to  
your Newcon Dealer. Newcon will repair (or at its option  
replace), the product or part thereof, which, on inspection by  
Newcon, is found to be defective in materials or workmanship.  
FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE  
WARRANTY!  
1. BRIEF DESCRIPTION  
SIB 16x40GR Gyro Stabilizing Binoculars is a modern,  
universal optical device designed for observation and tracking of  
distant objects and serve both amateur and professional needs:  
Observation aboard aircraft, land vehicles, boats or other  
moving platforms  
Law enforcement and security  
Search and rescue  
What This Warranty Does Not Cover:  
Military  
Space  
NEWCON is not responsible for warranty service should the  
product fail to be properly maintained or fail to function properly  
as a result of misuse, abuse, improper installation, neglect,  
damage caused by disasters such as fire, flood, lightning,  
improper electrical current, or service other than by a NEWCON  
Authorized Service. Postage, insurance, or shipping costs  
incurred in presenting your NEWCON product for warranty  
service are your responsibility. Please include a check or money  
order made out to NEWCON OPTIK for the amount of $15.00 to  
cover shipping and handling. This covers products shipped in  
USA or Canada only.  
The device incorporates the image stabilization technology,  
which enables the user to observe distant objects from moving  
and nonmoving platforms without degrading of the image  
resolution because of jolt or normal hand tremors.  
Combining fully coated, computer designed optics with high-  
speed internal gyrostabilizing system, SIB 16×40GR is the  
ultimate instrument for long-range observation, tracking and  
surveillance. High magnification, easy to carry and handle allow  
shake free observation under any demanding conditions.  
4
13  
 
7. TROUBLE SHOOTING  
2. APPEARANCE OF THE DEVICE  
The stabilizing mode does not work.  
Check that the batteries are installed properly. Check the charge  
of the batteries. Replace if they are weak. Do not use old  
batteries with new ones.  
The image does not appear in focus.  
Bring the inspected object to the center of the image. Turning the  
eyepieces (8), adjust to achieve the clearest image on the screen.  
If the view still does not seem in focus, clean the lenses. They  
could be foggy or dusty.  
Image is ‘waving’ when stabilizing mode has been engaged.  
This is a typical ‘warming-up’ effect that will last for no more  
than one minute after engaging the stabilizing mode.  
1–hand strap; 2–power supply unit; 3–power supply control indicator;  
4–power supply voltage switch; 5–stabilizing mode engaging lever; 6–  
device front panel; 7–neck strap; 8–eyepieces; 9–interpupillary  
adjustment lever.  
Condensation accumulates on the parts  
In order to avoid misting of the eyepiece lens in cold time use special  
protective covers.  
Image has disappeared during nighttime observation (using optional  
night eyepieces).  
When bright light gets into the objective lens of the night vision  
device it may result in disappearing of the image as the  
automatic shut-off feature comes into action to protect the  
device. Whenever this happens, turn the switch to the OFF  
position. In a minute or two the device will be ready for further  
operation.  
Fig. 1  
For ease of operation, the device is fitted with neck strap (7) and  
hand strap (1). Eyepieces (8), interpupillary adjustment lever (9)  
and stabilizing mode engaging lever (5) are positioned on the  
front panel (6) of the device. Power supply unit (2) is a  
detachable part of the device.  
Power supply voltage switch (4) and power supply control  
indicator (3) are at the front of the device.  
5
12  
 
6. STORAGE AND MAINTENANCE INSTRUCTIONS.  
Warning! After transportation or keeping the device at temperature lower  
than –25°C (–13°F), the device must be warmed up to ambient temperature for  
at least 6 hours before operating.  
Precautions: SIB 16x40 GR is a sophisticated precision optical  
instrument equipped with electronics. Therefore, it should be handled  
with due care.  
Keep your device away from direct sunlight, impacts, dust, moisture,  
and sudden changes of temperatures.  
Do not keep the device at temperatures higher than 50oC (122oF).  
Do not touch the optical surfaces with fingers. Doing so may  
damage the anti-reflection coating.  
Avoid shocks and sharp jolts.  
Cleaning of optical surfaces is only allowed with professional camera  
lens cleaning supplies.  
1–cartridge with AA type batteries; 2–connector;  
To clean the exterior of the device, use a soft clean cloth.  
Do not take the cover off the lens if not necessary.  
Keep away from heating appliances and central heating.  
Make sure to switch off the unit during periods of non-operation.  
Remove the batteries when storing the device for long period of time.  
Do not apply superfluous efforts at work with lens assembly, agile  
elements and thread connections.  
The manufacturer can only make repair works.  
Due to considerable optical magnification of the optional night  
eyepiece some small structures inside the tube coating in the form of  
dark and/or white points may be seen in the field of view, which does  
not affect the serviceability of the device.  
3–pin; 4–cramp; 5–delimiter; 6–lock  
Fig. 2 – Power Supply Unit  
The device is powered by either a cartridge with batteries (1) or  
by an on-board power source 12±1.2 V via connector (2).  
The power supply unit is attached to the device using delimiter  
(5) and lock (6).  
Pin (3) opens the delimiter of the power supply unit.  
Cartridge (1) with batteries is fixed in the power supply unit with  
cramp (4).  
6
11  
 
3. TECHNICAL CHARACTERISTICS  
Magnification  
7. In no less than a minute, press lever 5 (fig. 1) in the arrow  
indicated direction in order to engage the stabilizing mode  
and hold it in this position while observing.  
16x  
3.4°  
2.5  
Angular field of view  
Exit pupil diameter, mm  
ATTENTION! It is not allowed to engage the stabilizing mode  
of the device when the power supply control  
indicator is not glowing, or in less than a minute  
after device has been turned ON.  
Minimum focus, m  
30  
Interpupillary adjustment, mm:  
Dioptric adjustment, not less, dptr  
Transmission factor, not less  
58 – 72  
5
0.55  
When finishing the observation  
release lever 5 (fig. 1). The lever should return to the initial  
position. Now the stabilizing mode has been switched off.  
Switch OFF the power supply unit.  
Parallelism of eyepiece axes of sight:  
- Divergence on vertical plane, not exceeding:  
- Convergence on horizontal plane, not exceeding:  
- Divergence on horizontal plane, not exceeding:  
20’  
20’  
60’  
6 (AA)  
12  
5.3. Preparing the Device for Operation from On-board  
Source  
Power source (batteries):  
From an on-board source, V  
Angular velocity of panning in any  
direction, degree/sec:  
Stabilization freedom, degrees  
Overall dimensions, mm:  
Weight (w/o batteries), kg,  
Relative humidity (at +25°C) %:  
Temperature range, °C  
1. Replace the cartridge with batteries 1 (fig. 2) with a voltage  
transformer available in the complete set of the device.  
2. Connect the cable, supplied in the complete set, to the power  
supply unit connector 2 (fig. 2).  
3. Connect the device to the on-board power source.  
4. Then prepare the device for operation as outlined in the  
paragraph 5.2.  
0 - 6  
5
215×190×96  
1.98  
Up to 98  
-30 ÷ +45  
Temperature range during transportation, oC  
-50 ÷ +50  
10  
7
 
5.2. Preparing the Device for Operation with Image  
Stabilization  
1. Put the lens caps on the objective lenses. Take the power  
supply unit in your left hand.  
2. Pull out pin (3) on the power supply unit (fig. 2) and  
disconnect the power supply unit from the device with an  
easy movement towards you.  
3. Insert six AA batteries into the cartridge (1) (fig. 2)  
observing correct polarity.  
4. SUPPLIED ACCESSORIES  
SIB 16x40 Gyro is supplied in the following assembly:  
- Device  
- Objective lens caps  
- Carrying Case  
- Neck Strap  
- Hand Strap  
- DC regulator  
- User’s manual  
- Warranty card  
1 pc.  
2 pc.  
1 pc.  
1 pc.  
1 pc.  
1 pc.  
1 pc.  
1 pc.  
4. Mount the cartridge with batteries into the power supply unit  
(2) (fig. 1) and secure it by cramp (4) (fig. 2).  
5. ATTENTION! To avoid damage of the cramp, while  
mounting the cartridge into the power supply unit, particular  
attention must be drawn to its position respecting to the body  
of the power supply unit. While the cartridge is being  
mounted into the power supply unit, the cramp should be  
placed above the cartridge.  
6. In order to connect the power supply unit to the device, pull  
out pin (3) with an easy movement in the direction away  
from you and then release the locator to bring the power  
supply unit against the delimiter. Turn on the device by  
setting supply voltage switch (4) (fig. 1) to ON position and  
check the power supply unit for proper operation (indicator  
(3) must glow brightly).  
Optional accessories:  
- Amber Filters (optional)  
- Night Vision eyepieces (optional)  
2 pc.  
2 pc.  
5. OPERATION INSTRUCTIONS  
5.1. Preparing the Device for Operation without Image  
Stabilization  
1. Remove the device from the case and adjust neck strap (7)  
and hand strap (1) (fig. 1).  
2. Remove the protective caps from the objective lenses and, if  
necessary, mount the optional light filters.  
3. Adjust the interpupillary distance-using lever (9).  
4. Adjust the dioptric correction by rotating rings on the eyepieces (8).  
x
5. Now the device can operate as a conventional 16  
magnification binocular.  
9
8
 

Miele Food Saver HS12 User Manual
Milwaukee Cordless Saw 0740 20 User Manual
Milwaukee Home Safety Product 2217 20 User Manual
Multiquip Oxygen Equipment MC 62P User Manual
Nespresso Coffeemaker TK30N01GB User Manual
Nokia Cell Phone N95 4 User Manual
NordicTrack Home Gym NTEL79010 User Manual
Nortel Networks Answering Machine P091943002 User Manual
Oregon Scientific Portable Radio WR601 User Manual
ParaBody Home Gym 950 st User Manual