New Holland 400GM Series Flex-Wing
Finishing Mower Specifications
410GM 420GM 430GM
MODEL
410GM
100
420GM
200
430GM
300
PACKAGE
SIZE, in. (mm)
60 (1524)
12 (3.7) Flex
5 (1.5)
72 (1829)
15 (4.6) Flex
6 (1.8)
90 (2286)
17 (5.2) Flex
7.5 (2.3)
Overall cutting width, ft. (m)
Center deck cutting width, ft. (m)
Wing deck cutting width, ft. (m)
Deck overlap, in. (mm)
Overall width, in. (mm)
Transport width, in. (mm)
Maximum overall length, in. (mm)
Transport length, in. (mm)
Transport height, in. (mm)
Min. hp (kW)
4 (1.2)
6 (152)
5 (1.5)
6 (152)
6 (1.8)
12 (305)
146 (3708)
100 (2540)
182 (4623)
177 (4496)
90 (2286)
30 (22.4)
182 (4623)
101 (2565)
185 (4699)
180 (4572)
100 (2540)
35 (26.1)
207 (5258)
102 (2591)
196 (4978)
188 (4775)
110 (2794)
40 (29.8)
Cutting height range, in. (mm) ..................................................................................................1 to 5 (25 to 127)....................................................................................................
Blasé tip speed, FPM (mpm)........................................................................................................16,000 (4877).......................................................................................................
Caster wheels, 12............................................................................................................................15 x 6.00-6.........................................................................................................
Transport tires, 2...........................................................................................................................26 x 12.00-12.......................................................................................................
Approx. weight, lbs. (kg)
2600 (1179)
2800 (1270)
3100 (1406)
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|