NETGEAR Network Router WNR2020 N300 User Manual

Step 1. Prepare the modem.  
Unplug the modem’s power. If it has  
a battery backup, remove the  
battery.  
Step 2. Power on the  
Step 3. Cable the modem.  
Cable the modem to the Internet port of  
the router with an Ethernet cable.  
Installation Guide  
modem.  
Plug in your modem. Put the  
battery back in and turn on your  
modem.  
Wait approximately two minutes  
until your modem turns on.  
WNR2020 N300 Wireless Router  
Package Contents  
Step 4. Power on the router.  
Connect the power adapter to the  
router, then plug it into an outlet.  
DSL or cable  
Wait for the WiFi LED  
to light.  
Internet  
Step 5. Connect a computer.  
You can use an Ethernet cable or  
connect with WiFi.  
To connect with WiFi, use the WiFi  
network name and password on the  
router label.  
Router  
Power adapter  
Ethernet cable  
Router  
Front and Back Views  
Modem  
Step 6. Launch a browser.  
NETGEAR genie displays.  
Follow the genie steps to connect to  
the Internet.  
(Not included)  
If you do not see genie, type  
www.routerlogin.net. Then type  
admin for the user name and  
password for the password.  
WPS/Reset button  
Power input  
Internet port  
Ethernet LAN ports  
Internet LED Ethernet LAN port LEDs  
Power LED  
WiFi LED  
 

Multiquip Trash Compactor MVH 402DSB User Manual
NAD DVD Player L55 User Manual
NEC Telephone DSX 40 User Manual
New Buck Corporation Indoor Fireplace DV23ZC User Manual
Omron Building Set hja 306 User Manual
Optoma Technology Projector EP750 User Manual
Oreck Vacuum Cleaner BB870 ED User Manual
Panasonic Telephone KX T7710 User Manual
ParaBody Home Gym 822104 User Manual
Partner Tech Lawn Mower P145107HP User Manual