Miele Oven M Nr 09 786 840 User Manual

H 6780 BP  
H 6880 BP  
 
Do not dispose of this appliance with  
your household waste.  
The cardboard box and packing  
materials protect the appliance during  
shipping. They have been designed to  
be biodegradable and recyclable.  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling authority about the  
possibility of recycling these materials.  
Ensure that any plastic wrappings,  
bags, etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
Before discarding an old appliance  
ensure that it presents no danger to  
children while being stored for disposal.  
Unplug it from the outlet, cut off its  
power cord and remove any doors to  
prevent hazards.  
131  
 
– The total hose length must not  
exceed 24.5 ft (7.5 m).  
Make sure that the water shut-off  
valve is still accessible after the  
appliance has been installed.  
The appliance may only be  
connected to the water supply by a  
qualified professional.  
Disconnect the appliance from the  
power supply before connecting it to  
the water line.  
Turn off the water supply before  
connecting the water intake lines for  
the oven.  
Replace the stainless steel hose if it  
is damaged, using only an original  
Miele hose to do so (available from  
Miele). The hose must be suitable for  
supplying drinking water.  
– All devices used for connecting the  
appliance to the water supply must  
comply with the current national and  
local safety regulations in the country  
in which the appliance is being  
installed.  
– The oven can be connected to a tap  
water line without a check valve.  
– A shut-off valve must be provided  
between the stainless steel hose and  
the building's water supply to ensure  
that the water supply can be cut off if  
necessary.  
– Make sure that the water shut-off  
valve is still accessible after the  
appliance has been installed.  
– The water pressure must be between  
14.5 and 145 psi (1 and 10 bar) If the  
pressure is higher than this, install a  
pressure reducing valve.  
– The stainless steel hose provided has  
a length of 4' 11" (1.5 m). Longer inlet  
hoses are available if necessary. Do  
not shorten the hoses.  
132  
 
Make sure that the stainless steel  
hose is not kinked or damaged. The  
stainless steel hose must  
shortened.  
be  
3/8"  
Remove the cover from the hard  
water port at the back of the oven.  
Connect the stainless steel hose to  
the water supply.  
Take the angled side of the stainless  
steel hose and check whether a  
sealing ring is present. If necessary,  
insert one.  
Old or previously used tubing should  
never be used.  
Only use the stainless steel hose  
supplied.  
Screw the stainless steel hose  
coupling nut onto the threaded union.  
Ensure that the hose is correctly  
fitted and that it is water-tight.  
Ensure that the hose is correctly  
fitted and that it is water-tight.  
Slowly open the shut-off valve to the  
water supply and check for leaks. If  
necessary, check whether the sealing  
ring and fittings are tight.  
Danger of electric shock!  
Disconnect the oven from the  
electrical supply before connecting  
to the water supply.  
You can now continue with the  
installation (See "Installation").  
A faucet with a 3/8" connection thread  
is required for the connection.  
Check that the sealing ring is present.  
Replace, if necessary, before  
connecting the hose to the water  
supply.  
133  
 
CAUTION:  
Before servicing, disconnect the  
power supply by either removing the  
fuse, shutting off the power main or  
manually "tripping" the circuit  
breaker.  
The oven is equipped with a power  
cord approx. 7' 2" (2.2 m) in length with  
a NEMA 14-30 P plug ready for  
connection to the power supply:  
– 120/208 V, 30 A, 60 Hz  
or  
Installation, repair and maintenance  
work must be performed by a Miele  
authorized service technician. Work  
by unqualified persons could be  
dangerous and may void the  
warranty.  
– 120/240 V, 30 A, 60 Hz  
The voltage can be adjusted (see  
"Settings - Electrical Version").  
'
Before connecting the appliance to  
the power supply, make sure that the  
voltage and frequency listed on the  
data plate correspond with the  
household electrical supply. This  
data must correspond to prevent  
machine damage. Consult an  
electrician if in doubt.  
(NEMA 14-30P, L1, L2, N, G, 30  
amp 208/240 VAC)  
Only operate the appliance after it  
has been installed into cabinetry.  
The plug must be plugged into an  
appropriate outlet that is installed  
and grounded in accordance with all  
local codes and ordinances.  
134  
 
Miele ovens can be installed flush or proud. Discuss your installation  
requirements with your architect, designer and installer.  
24"  
(610 mm)  
28 1/4"  
(718 mm)  
23 3/4" (603 mm)  
22 9/16" (573 mm)  
28 7/16"  
(722 mm)  
4"  
(100 mm)  
28 1/2"  
(724 mm)  
26 3/8"  
(670 mm)  
28 5/8"  
(727 mm)  
27 3/4"  
(705 mm)  
29 13/16"  
(757 mm)  
7/8" (22*/23** mm)  
Cut-out (4" x 28" / 100 mm x 720 mm) in the bottom of the cabinet for power  
cord and ventilation  
Power cord with plug  
*
Oven with glass front  
** Oven with metal front  
Front design may vary depending on model. For the more current specifications  
please visit the Miele website.  
! Please note: For flush mount installations, please take the depth and location of  
the electrical utility box into consideration prior to planning your design. For more  
information please contact our Customer Care Centre. !  
135  
 
24"  
(610 mm)  
28 1/4"  
(718 mm)  
23 3/4" (603 mm)  
4"  
(100 mm)  
22 9/16" (573 mm)  
28 7/16"  
(722 mm)  
28 1/2"  
(724 mm)  
26 3/8"  
(670 mm)  
28 5/8"  
(727 mm)  
27 3/4"  
(705 mm)  
B
29 13/16"  
(757 mm)  
7/8" (22*/23** mm)  
Cut-out (4" x 28" / 100 mm x 720 mm) in the bottom of the cabinet for power  
cord and ventilation  
Power cord with plug  
*
Oven with glass front  
** Oven with metal front  
Front design may vary depending on model. For the more current specifications  
please visit the Miele website.  
136  
 
It is recommended that you remove  
the door before installing the  
The oven must not be operated  
until it has been properly installed  
within cabinetry.  
appliance (see "Cleaning and Care -  
Removing the door") and all oven  
accessories from the cavity. This will  
make for easier installation into the  
niche and will not tempt you to use  
the handle to carry it.  
The oven must have an adequate  
supply of cool air for proper  
operation. The required air must not  
be heated excessively by other heat  
sources, e.g. wood burning stove.  
If there are side handles, please  
remove them.  
Observe the following when  
installing:  
Build into cabinetry with no back  
wall.  
Make sure that the shelf that the  
appliance sits on does not touch the  
wall.  
Push the oven into the cabinetry and  
align it.  
Open the door (if it was not removed  
previously).  
Do not install insulation strops on the  
side walls of the cabinet housing.  
Before connecting the oven to the  
power supply, first disconnect the  
power supply from the oven isolator  
switch.  
Connect the power cord to the  
Use the supplied screws to secure  
the oven to the side walls of the  
cabinetry through the holes in the  
trim.  
electrical supply.  
Do not carry the oven by the door  
handle. The door can be damaged.  
Use the handles on each side of the  
oven to carry it.  
Reinstall the door, if necessary (see  
"Cleaning and care - Installing the  
door").  
137  
 
Miele uses software to operate and control the appliance.  
The copyright authorisation from Miele and other relevant software suppliers (e.g.  
Adobe) must be respected.  
Miele and their suppliers reserve the rights to the software components.  
In particular the following are prohibited:  
– copying and distribution,  
– modifications and derivations,  
– decompilation, reverse engineering, disassembling and other such reductions of  
software.  
This product contains Adobe® Flash® Player Software under licence from Adobe  
Systems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash are  
registered trademarks of Adobe Systems Incorporated.  
Components which fall under GNU General Public Licence and further Open  
Source licenses are integrated into the software.  
An overview of the integrated Open Source components and a copy of the current  
licence can be obtained at http://www.miele.com/device-software-licenses. You  
will need to enter the specific product name.  
Miele will provide the source code for all components of software licensed under  
the GNU General Public License and comparable Open Source licenses.  
For source code requests, please email [email protected].  
138  
 
Please have the model and serial number  
of your appliance available before  
contacting Technical Service.  
U.S.A.  
Canada  
Miele, Inc.  
Importer  
Miele Limited  
National Headquarters  
9 Independence Way  
Princeton, NJ 08540  
Headquarters and Miele Centre  
161 Four Valley Drive  
Vaughan, ON L4K 4V8  
800-843-7231  
609-419-9898  
609-419-4298  
Phone:  
Fax:  
Customer Care Centre  
Phone:  
800-565-6435  
905-532-2272  
Technical Service & Support  
Nationwide  
800-999-1360  
888-586-8056  
Phone:  
Fax:  
Germany  
Manufacturer  
Miele & Cie. KG  
Carl-Miele-Straße 29  
33332 Gütersloh  
139  
 
H6780BP; H6880BP  
 

Mr Heater Gas Heater MH25LP MH25NG User Manual
Multiquip Portable Generator DCA 70SSJU User Manual
Murray Lawn Mower 96017000700 User Manual
NEC Personal Lift NP01FL User Manual
NordicTrack Treadmill NTTL17900 User Manual
Omega Vehicle Security Electric Heater LSC6400 User Manual
On Q Legrand Switch RS 250 User Manual
Oregon Scientific Clock RRM612PA User Manual
Panasonic CRT Television CT 27G22 User Manual
Panasonic Telephone KX T7885 W User Manual