Operating and installation instructions
Freezer
F 311 i-6
G
To avoid the risk of accidents or
damage to the appliance it is
essential to read these instructions
before it is installed or used for the first time.
M.-Nr. 06 516 910
Contents
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Ventilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Before installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Building in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing the door hinging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Building into a peninsular run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Description of the the appliance
eOn/Off button
aTemperature indicator light
bMains indicator light
fTemperature selector
gTemperature display
cSuper freeze indicator light
dSuper freeze button
iFreezer tray
kMarker system for frozen food
jFreezer drawers with
freezer calendar
4
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Please ensure that the appliance
presents no danger to children while
being stored for disposal.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and can normally be
recycled.
It should be unplugged or
disconnected from the mains electricity
supply by a competent person. The
plug must be rendered useless and the
cable cut off directly behind the
appliance to prevent misuse. See the
"Warning and Safety" section of this
booklet for further details.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Rather than just throwing these
materials away, please ensure that they
are recycled.
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please dispose of your old appliance at
your local community waste collection /
recycling centre and not with your
household waste.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
5
Warning and Safety instructions
Technical safety
This appliance complies with all
relevant legal safety requirements.
Inappropriate use can however lead
to personal injury and damage to
property.
This appliance contains the coolant
Isobutane (R600a), a natural gas
which is very environment friendly.
Although it is flammable, it does not
damage the ozone layer and does not
increase the green house effect. The
use of this coolant has, however, led to
a slight increase in the noise level of the
appliance. In addition to the noise of
the compressor, you might be able to
hear the coolant flowing around the
system. This is unavoidable, but does
not have any adverse effect on the
performance of the appliance.
Care must be taken during
To avoid the risk of accidents and
damage to the appliance, read the
instructions carefully before using for
the first time. They contain important
notes on installation, safety,
operation and care of the appliance.
Keep these operating instructions in
a safe place and pass them on to
any future user.
transportation and setting up of the
appliance that no parts of the coolant
system are damaged. Leaking coolant
can damage the eyes.
Correct use
In the event of any damage:
- avoid open fires
This appliance is intended for
domestic use only, to store deep
frozen food, freeze fresh food and to
make ice.
Any other usage is not supported by
the manufacturer and could be
dangerous. The manufacturer cannot
be held liable for damage caused by
incorrect or improper use of the
appliance.
and anything which creates a spark,
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department
for advice.
The more coolant there is in an
appliance, the larger the room it
should be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of
This appliance is not a toy! To avoid
the risk of injury, do not allow
children to play on or near it, or to
play with the controls. Supervise its
use by the elderly or infirm.
combustible gases building up.
For every 8 g of coolant at least 1 m3
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
6
Warning and Safety instructions
Before connecting the appliance to
the mains supply, make sure that
the rating on the data plate
Installation work, maintenance and
repairs may only be carried out by
suitably qualified and competent
persons to ensure safety.
corresponds to the voltage and
frequency of the household supply. This Repairs and other work by unqualified
data must correspond in order to avoid
risk of damage to the appliance.
Consult a qualified electrician if in
doubt.
persons could be dangerous and the
manufacturer will not be held liable.
Ensure that current is not supplied
to the appliance while maintenance
or repair work is being carried out.
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system, which complies with local and
national safety regulations. It is most
important that this basic safety
requirement is present and regularly
tested. Where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
The appliance is only completely
isolated from the electricity supply
when:
– it has been switched off at the wall
socket and the plug has been
withdrawn.
– the mains fuse is withdrawn, or
– or the screw-out fuse is removed (in
countries where this is applicable).
Do not connect the appliance to
the mains electricity supply by an
extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Safe operation of the appliance is
only assured if it has been installed
and connected in accordance with
these operating and installation
instructions.
Use
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
Never handle frozen food with wet
hands. Your hands may freeze to
the frozen food. Danger of frost burn.
Do not use any electrical
equipment in this appliance, e.g.
ice cream makers. Danger of sparking
and explosion!
7
Warning and Safety instructions
Do not take ice cubes out with your
bare hands and never place ice
cubes or ice lollies in your mouth
straight from the freezer. The very low
temperature of the frozen ice or lollies
can cause frost burn to the lips and
tongue.
Observe the "use by" dates given
on food to avoid the risk of food
poisoning. Storage times will depend
on several factors including the
freshness and quality of the food as
well as the temperature at which it is
stored. Follow the instructions given on
food manufacturer’s packaging on
storage conditions required as well as
the "use by" date.
Do not refreeze thawed or partially
thawed food.
Defrosted food should be used up as
quickly as possible as food soon loses
it nutritional value and goes off.
Defrosted food may only be re-frozen
after it has been cooked.
Do not use sharp edged objects to
– remove frost and ice,
– separate frozen foods and remove
ice trays. They will damage the
evaporator causing irreversible
damage to the appliance.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
Never place electric heaters or
candles in the appliance to defrost
it. These can damage the plastic parts.
Do not use defrosting sprays, or
de-icers as they might contain
substances which could damage the
plastic parts or which could cause the
build up of gases and pose a danger to
health.
Do not store cans or bottles
containing carbonated drinks or
liquids which could freeze in the
freezer. The cans or bottles could
explode.
Danger of injury and damage to the
appliance.
Do not use any oils or grease on
the door seals. These cause the
seals to deteriorate and become
porous with time.
When cooling drinks quickly in the
freezer make sure bottles are not
left in for more than one hour, otherwise
they could burst. Danger of injury and
damage to the appliance.
Do not block the ventilation gaps in
the plinth or the top of the
appliance housing unit as this would
impair the efficiency of the appliance,
increase the electricity consumption
and could cause damage to the
appliance.
8
Warning and Safety instructions
The appliance is designed for use
Disposal of your old appliance
within certain climate ranges
(ambient temperatures). It must not be
used in ranges for which it is not
designed. The climate range for your
appliance is stated on the data plate
inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
will lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
Before disposing of an old
appliance first make the door latch
or lock unusable.
This way you will prevent children from
accidentally locking themseves in and
endangering their lives.
Disconnect it from the mains. Cut
off the cable and render any plug
unusable.
Be careful not to damage any part
of the pipework whilst awaiting
disposal, e.g. by
Never use a steam-cleaning
appliance to defrost or clean this
appliance. Pressurised steam could
reach the electrical components and
cause a short circuit.
– puncturing the refrigerant channels
in the evaporator.
– bending any pipework.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the appliance guarantee.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
9
How to save energy
Normal energy consumption Increased energy
consumption
Installation site
In a ventilated room.
In an enclosed, unventilated room.
In direct sunlight.
Protected from direct sunlight.
Not situated near to a heat source Situated near to a heat source
(radiator, oven).
(radiator, oven.
Where the ambient room
temperature is ideal at approx.
20°C.
Where there is a high ambient
room temperature.
Temperature setting with
a thermostat which is
approximate (set in
stages).
With a medium setting of 2 to 3.
With a high setting: The lower the
temperature in the freezer, the
higher the energy consumption.
Temperature setting with
a thermostat which is
exact to the degree
(digital display).
Cellar section 8 to 12°C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer
than 16 °C.
Refrigerator section 4 to 5 °C
StayFresh zone just above 0 °C
Freezer section -18°C
Use
Only open the door when
Frequent opening of the door for
necessary and for as short a time long periods will cause a loss of
as possible.
coldness.
Store food in an organised way.
If food is not stored in an
organised way, searching for an
item will mean the door is open for
longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Placing hot food in the appliance
will cause the compressor to run
for a long time, as the appliance
will have to work harder to lower
the temperature.
Store food covered or packaged. The evaporation or condensation
of liquids will cause a loss of
coldness in the refrigerator.
Place frozen food in the
refrigerator to defrost.
Do not over-fill the appliance to
allow air to circulate.
10
How to save energy
Normal energy
consumption
Increased energy
consumption
Defrosting
Defrost the freezer when a layer of A layer of ice hinders the cold
ice one centimetre thick has built from reaching the frozen food, and
up.
causes an increase in energy
consumption.
11
Switching on and off
Before using for the first time
Switching off
^ Clean the inside of the appliance and ^ Press on the light coloured surface of
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
the On/Off button with a thin, blunt
object.
All the indicator lights will go out and
the cooling system will switch off.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 11/2 and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
Switching on
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^ defrost and clean the appliance out
and
^ Use a thin blunt object (e.g. a pencil)
to press on the light coloured surface
of the On/Off button.
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
The mains indicator light and the
temperature indicator light will come
on.
The appliance will start cooling.
The temperature indicator light will
remain on until the set temperature has
been reached.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
12
The correct temperature
. . . in the freezer
– the higher the ambient temperature
surrounding the appliance.
It is very important to set the correct
temperature for storing food in the
freezer. Micro organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro organisms. Reducing the
temperature reduces their growth rate.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
Temperature selection
The temperature is set using the
temperature dial.
For freezing fresh food and storing
frozen food for a long time a
temperature of at least -18 °C is
needed. At this temperature the growth
of micro organisms is generally halted.
As soon as the temperature rises to
above -10 °C, the micro organisms
become active in the food again so that
it cannot be kept as long. For this
reason partially defrosted or defrosted
food must not be re-frozen. Food may
be re-frozen once it has been cooked
as the high temperatures achieved
when cooking destroy most
^ Use a coin to turn the temperature
dial clockwise to the required setting.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
micro-organisms.
The higher the setting the lower the
temperature in the appliance.
The temperature in the appliance will
rise:
In normal use, a midway setting is
generally sufficient.
– the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
– if too much fresh food is being frozen
at once,
13
The correct temperature
Temperature display
However, if the temperature remains
above -18 °C for a long time, check that
the frozen food has not started to
defrost. If it has started thawing, check
that it is safe to use and if it is, use it as
quickly as possible.
During normal operation the
temperature display on the control
panel shows the temperature in the
warmest part of the appliance. The
temperature display will be working
even when the appliance is switched
off.
The temperature display can only show
temperatures which are below 0 °C.
This means that when the freezer is
switched on no exact value will be
displayed until the appliance has
cooled down to 0 °C and below.
If you have adjusted the temperature
dial in order to set a different
temperature, wait for approx. 6 hours
if the freezer is not very full and for
approx. 24 hours if the freezer is full
before checking the temperature
display. It will take this long for the
display to show the accurate
temperature of the freezer. If the
temperature displayed is too low or too
high, then adjust the temperature once
more.
A temperature above -18 °C is no
cause for concern in the following
circumstances:
– when the appliance has just been
switched on,
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
14
Temperature alarm
The temperature indicator light will
come on as soon as the temperature
becomes too warm.
The temperature indicator light will
come on
– when the freezer is switched on.
– if the freezer door has been left open
for a while, e.g. in order to load, to
re-arrange or to take food out.
– when freezing large amounts of food
at once.
– when there has been a lengthy
interruption to the power supply.
It will go out when the temperature in
the freezer is cold enough.
15
Super freeze
Freezing fresh food
Switching on super freeze
Fresh food should be frozen as quickly
as possible. This way the nutritional
value of the food, its vitamin content,
appearance and taste are not impaired.
Switch the super freeze function on
before putting fresh food into the
freezer.
When freezing small quantities of food
in the freezer the super freeze function
should be switched on 4 - 6 hours
Food which takes a long time to freeze
will lose more water from its cells which beforehand. When freezing the
then shrink.
During the defrosting process only
maximum load of food the super
freeze function should be switched on
some of this water is reabsorbed by the 24 hours beforehand.
cells. The rest collects around the food.
In practice this means that the food
loses a large degree of its moisture.
If food is frozen quickly the cells have
less time to lose moisture so they shrink
less. As there is not so much moisture it
is easier for the food to reabsorb it
during the defrosting process and there
will be very little water around the
defrosted food.
^ Press the super freeze button. The
super freeze indicator light will come
on.
The appliance works at full power to
lower the temperature in the freezer.
Super freeze is not necessary:
Switch super freeze off once you have
loaded the freezer.
– when putting in frozen food.
– when freezing up to 2 kg fresh food
daily.
Switching super freeze off
^ Press the super freeze button. The
super freeze indicator light will go
out.
The freezer wll now operate at normal
power.
16
Freezing and storing food
Maximum freezing capacity
Home freezing
To ensure that fresh food placed in the
freezer freezes through to the core as
quickly as possible, the maximum
freezing capacity must not be
Only freeze fresh food which is in good
condition.
Hints on home freezing
exceeded. The maximum freezing
capacity for freezing within a 24-hour
period is given on the data plate
"Freezing capacity ....kg/24 hrs".
– The following types of food are
suitable for freezing:
Fresh meat, poultry, game, fish,
vegetables, herbs, fresh fruit, dairy
products, pastry, leftovers, egg
yolks, egg whites and a range of
pre-cooked meals.
Storing frozen food
When buying frozen food to store in
your freezer, check
– The following types of food are not
suitable for freezing:
– that the packaging is not damaged,
– the use-by date,
Grapes, lettuce, radishes, sour
cream, mayonnaise, eggs in their
shells, onions, whole raw apples and
pears.
– the temperature at which the frozen
food is being stored in the shop. The
length of time it can be kept is
– To retain colour, taste and vitamin C,
vegetables should be blanched after
they have been trimmed and
reduced if it has been stored at a
temperature warmer than -18 °C.
washed. To blanch: bring a large
saucepan of water to the boil and
immerse the vegetables in the fast
boiling water for 2-3 minutes,
depending on the variety. Remove,
and plunge into ice-cold water to
cool quickly. Drain and pack ready
for freezing.
^ Buy frozen food once you have
finished the rest of your shopping,
and wrap it in newspaper or use a
cool bag or cool box to transport it.
^ Store it in the freezer as soon as
possible.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
– Lean meat freezes better than fatty
meat, and can be stored for
considerably longer.
– To prevent chops, steaks, cutlets or
rolled meat from freezing together in
solid blocks when packed, separate
with a sheet of plastic freezer film.
17
Freezing and storing food
– Do not season fresh foods or
blanched vegetables before
^ Make a note of the contents and the
date of freezing on the packaging.
freezing. Only season cooked food
lightly before freezing, but care
should be taken as the taste of some
spices alters when frozen.
Before placing food in the freezer
^ When freezing more than 2 kg of
fresh food, switch on the Super
freeze function for some time before
placing the food in the freezer
section (see "Super freeze").
– Do not place hot food or drinks in the
freezer. This causes already frozen
food to thaw and increases the
energy consumption considerably.
Allow hot food and drinks to cool
down before placing them in the
freezer.
Placing food in the freezer
Fresh food can be placed in any
drawer for freezing, however it is
preferable to use the upper drawers.
Large quantities can be placed directly
on the plate between the 2nd and 3rd
freezer drawers as food will freeze very
quickly here. To do this first take out the
2nd drawer.
Packing
^ Freeze food in portions.
Unsuitable packing material
- wrapping paper
- grease-proof paper
- cellophane
Each drawer and the plate can be
loaded with a maximum of 25 kg.
- bin bags
- plastic carrier bags
^ Place the food flat in the bottom of
the drawers or on the plate between
the 2nd and 3rd drawers so that it
freezes through to the core as quickly
as possible.
Suitable packing material
- plastic freezer film
- freezer bags
- aluminium foil
- freezer containers
^ Make sure that the packaging and
containers are dry to prevent them
sticking together when frozen.
^ Expel as much air as possible from
bags etc. before sealing them, to
prevent freezer-burn on food.
When freezing, make sure that food
already frozen does not come into
contact with fresh food being frozen
as this could cause the frozen food
to begin to defrost.
^ Close the packaging tightly with
- rubber bands
- plastic clips
- string or bag ties
- freezer tape.
Freezer bags may also be sealed
using home heat-sealing kits.
18
Freezing and storing food
To give more room for freezing large
items such as a whole turkey or a large
joint of meat the plate between the 2nd
and 3rd drawers can be removed.
^ Remove the second drawer from the
top.
^ Clip the markers over the guides at
an angle of approx. 45º. Press
downwards until they click into
position.
Use the markers to indicate the type of
food being frozen, and turn the dials to
the appropriate number to indicate the
month the food was first placed in the
freezer.
^ Lift the front edge of the plate out of
its holder and pull the plate out of the
appliance.
Reverse this procedure to put the cold
plate back into the freezer.
Defrosting
Frozen food can be defrosted in
different ways:
Freezer calendar
– in a microwave oven,
The freezer calendar on the freezer
drawer gives the length of time which
various foods can be stored for
effectively.
– in an oven using the "Fan" or "Defrost"
setting,
– at room temperature,
– in the refrigerator,
– in a steam oven.
Where the storage time given on the
packaging differs, follow the advice on
the packaging.
Poultry It is particularly important to
observe food hygiene rules when
defrosting poultry. Do not use the liquid
from defrosted poultry. Pour it away and
wash the container it was in, the sink
and your hands. Danger of salmonella
poisoning!
Marker system for frozen food
Markers serve as a reminder of how
long food has been stored.
Each freezer drawer has two slide
markers with dials. The months are
represented on the dials as 1 - 12.
19
Freezing and storing food
Fruit should be defrosted at room
temperature in its packing, or in a
covered bowl.
^ Ice cubes can be removed easily
from the tray by twisting the tray
gently or by holding it under cold
running water for a short while.
Most vegetables can be cooked while
still frozen. Just put straight into boiling
water or hot fat. The cooking time is
slightly less than that of fresh
vegetables.
Cooling drinks
When cooling drinks quickly, make sure
bottles are not left in the freezer for
more than one hour, as they could
burst.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
Freezer tray
The freezer tray is useful for freezing
small items such as berries and
vegetables. They can be frozen
individually and therefore maintain their
shape when defrosted.
Ice cube tray
(with release button, depending on mo-
del)
^ Space the food out loosely on the
tray.
^ Press down the release button on the
ice cube tray and fill the tray with wa-
ter. Any excess will flow out through
the outlet.
Leave food for 10 - 12 hours to freeze
thoroughly on the tray. Transfer it to a
freezer bag or suitable container once
frozen. Place the bag or container in
the freezer drawer.
^ Now pull the release button up to
seal the ice cube tray. Place the tray
on the bottom of one of the freezer
drawers.
^ Once frozen, use a blunt instrument,
for example a spoon handle, to
remove the ice tray from the freezer
compartment.
20
Defrosting
In normal use ice and frost will form on
the evaporator plates. If allowed to
accumulate, this will impair the
efficiency of the freezer and increase
the consumption of electricity.
To defrost
Carry out the defrosting procedure
as quickly as possible if food has
not been placed in another freezer.
The longer the food is left out at
room temperature, the faster it
defrosts.
Do not scrape ice and frost off the
evaporator plates as this can
damage the evaporator plates and
the freezer making it unusable.
^ Switch the appliance off with the
On/Off button.
The freezer should be defrosted from
time to time. It must be defrosted if a
layer of ice approx. 5 mm thick has
accumulated. It is best to defrost when
only very little food or no food at all is
left in the freezer.
The mains indicator light goes out.
^ Open the freezer door.
To speed up defrosting, a bowl with hot
water (not boiling) can be placed in the
appliance and some warm water in the
bottom drawer. Closing the door in this
instance will help retain the warmth and
speed up the defrosting process.
Before defrosting
^ Switch on the super freeze function at
least 4 hours before defrosting to
ensure frozen food retains its cold
reserve for longer when taken out of
the freezer.
We do not recommend the use of
hot air blowers such as hairdryers
for defrosting your freezer.
^ Remove the frozen food from the
freezer and place it in another freezer
or cool box or wrap it in several
layers of newspaper or cloths and
store in a cool place until the freezer
is ready for use again.
Never place electric heaters or
candles in the appliance to defrost
it. These can damage the plastic
parts.
Do not use defrosting sprays, or
de-icers as they could contain
substances which could damage
the plastic parts and which may
cause the build up of gases and
pose a danger to health.
^ Remove all the freezer drawers,
except the lowest drawer.
The lowest drawer is used to collect
defrosted water.
21
Defrosting
After defrosting
^ Take the bottom drawer out of the
freezer and empty it.
^ Mop up any residual water still in the
freezer with a sponge or absorbent
cloth.
^ Clean the freezer and then dry it
thoroughly.
^ Close the door and then switch the
freezer on with the On/Off button.
The mains indicator light will come on.
^ Switch on super freeze so that the
freezer can get down to temperature
quickly.
The super freeze indicator light
comes on.
^ Once the freezer has reached the
required temperature place the food
back in the drawers and place them
back in the freezer.
^ Switch super freeze off again.
The indicator light goes out.
22
Cleaning and care
^ Take out any removable parts for
cleaning e.g. drawers.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Interior and accessories
Use lukewarm water with a little mild
detergent. All accessories should all be
hand washed. Do not wash in a
dishwasher.
Door fronts should be cleaned using
a solution of warm water with mild
detergent applied with a soft cloth or
with a suitable cleaning agent for the
type of door panel fitted.
^ After cleaning wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
Make sure that no water can
penetrate into the electronic unit.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, Part Number 980 13530,
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.
Never use steam cleaning
apparatus to defrost or clean the
appliance. The steam could attack
the electrical components and
cause a short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliance’s
energy consumption.
^ Clean the appliance immediately
after defrosting it.
Door seal
Before cleaning
Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous with time.
^ Switch the appliance off. Remove the
frozen food from the freezer and
place it in another freezer or cool box
or wrap it in several layers of
newspaper or cloths and store in a
cool place until the freezer is ready
for use again.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
23
Cleaning and care
After cleaning
^ Close the door, and switch the
appliance on.
^ Switch on the super freeze function
so that the freezer can get down to
temperature quickly. The super
freeze indicator light will come on.
^ Once the freezer has reached the
required temperature place the food
back in the drawers and place them
back in the freezer.
^ The super freeze function can be
switched off once a constant
temperature of at least -18 °C has
been reached in the freezer. The
super freeze indicator light will go
out.
24
Problem solving guide
. . . the temperature is too low.
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations. Repairs
and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable
for unauthorised work.
^ Turn the temperature selector to a
setting closer to "1".
^ The Super freeze function has not
been switched off. The indicator light
is still on.
. . . the appliance is switching in too
frequently and for too long.
^ Check whether the ventilation gaps in
the plinth and in the housing unit at
the top have been covered over or
become too dusty.
Some minor problems can be corrected
without contacting the Miele Service
Department.
What to do if . . .
^ The door has been opened too
frequently, or a large amount of fresh
food has been put in at once for
freezing.
. . . the appliance does not get cold.
^ Check whether the appliance has
been switched on. The mains
indicator light must be lit up.
^ Check that the door has been closed
properly.
^ Check that the plug is correctly
inserted in the socket and switched
on.
^ Check whether a thick layer of ice
has built up. If it has, then the
appliance will need defrosting.
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has, contact the Miele Ser-
vice Department.
. . . the temperature indicator light is
on?
The temperature in the freezer has
become too warm because
. . . the door will not open because it
has been opened and closed too
many times in succession.
^ the door has been opened too
frequently, or large amounts of fresh
food have been put in at once for
freezing.
This is not a fault. The suction caused
by opening and closing the door is
preventing the door from opening. Wait
a few minutes and then try again. It
should now open without force.
^ there has been a lengthy interruption
to the power supply.
^ the ventilation gaps are blocked.
The temperature indicator light will go
out when the temperature in the freezer
is cold enough.
25
Problem solving guide
. . . the mains indicator light is not on.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
^ Check if the Super freeze indicator
light comes on when you press the
Super freeze button. If it does, then
the mains indicator light is defective.
Call the Miele Service Department.
To prevent unnecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
^ If the Super freeze indicator light
does not come on either, then check
whether
- the plug is correctly inserted in the
socket.
- the mains fuse has blown. If it has
there is a fault. Call the Miele Service
Department.
. . . the Super freeze indicator light
does not light up, even though the
appliance is working.
^ The indicator light is defective. Call
the Miele Service Department.
. . . food has frozen together.
^ Use a blunt instrument, e.g. a spoon
handle or plastic scraper, to prise it
apart carefully.
. . . there is a thick layer of ice in the
freezer.
^ Check whether the door closes
properly.
^ Defrost and then clean the freezer.
Too thick a layer of ice reduces
efficiency and increases energy
consumption.
26
Noises
Normal noises
What causes them
Brrrrr...
Humming noise made by the motor (compressor). This noise can
get louder for brief periods when the motor is switching on.
Blubb, blubb....
Click....
A gurgling noise can be heard when coolant is circulating
through the pipes.
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr....
On multi-zone and frost-free appliances you can sometimes just
hear the movement of air circulating inside the appliance.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that you can
easily rectify
What causes them, and what can you do about
them?
Rattling, vibrating
The appliance is uneven: Realign the appliance using a spirit
level, by raising or lowering the screw feet underneath the
appliance.
The appliance is touching another appliance or piece of
furniture: Move it away.
Drawers, baskets or shelves are unstable or sticking: Check
all removable items and refit them correctly.
Are any bottles or containers unstable or knocking against
each other? Separate them.
The transport cable clips are hanging loose at the back of
the appliance: Remove the clips.
27
After sales service
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– the Miele Service Department (see
back cover for address).
When contacting your Dealer or the
Service Department, please quote the
model and serial number of your
appliance. This information is given on
the data plate.
Please note that telephone calls may
be monitored and recorded for
training purposes.
28
Electrical connection
Electrical connection U.K.
Non-rewireable plugs (BS 1363)
All electrical work should be carried out The fuse cover must be re-fitted when
by a suitably qualified and competent
person in accordance with local and
national safety regulations.
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220-240 V 50 Hz supply.
The voltage and connected load are
given on the data plate. Please ensure
that these match the household mains
supply. The fuse rating is quoted on the
plug.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Connection should be made via a
suitable switched socket which is easily
accessible. For extra safety it is
advisable to install a residual current
device (RCD) with a trip current of 30
mA (in accordance with DIN VDE 0664,
VDE 0100, Section 739).
WARNING
THIS APPLIANCE MUST BE
EARTHED
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
The appliance must not be connected
to an inverter and must not be used
with a plug adapter as these can cause
damage to the appliance’s electronic
unit.
29
Installation
Ventilation
This appliance must be built in,
otherwise it could tip up.
Air at the rear of the appliance gets
warm. The appliance housing unit must
be constructed to allow sufficient space
for ventilation. Miele kitchen units are
designed to provide this ventilation.
Location
The appliance should be installed in a
dry well ventilated room.
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance for air to circulate.
The air inlet to the appliance is via the
plinth in the housing unit.
The cross section of the air inlet and
outlet must be at least 200 cm2 to
ensure that air can circulate without
hinderance. Otherwise the appliance
has to work too hard resulting in an
increase in electricity consumption and
damage to the compressor.
The room temperature should not go
above or below the climate range for
which the appliance is designed. The
higher the ambient temperature of the
room the more energy the appliance
requires to operate. It should not be
installed where it is exposed to direct
sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator.
Climate range
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
The appliance is designed for a
particular climate range (ambient room
temperature), and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.
Before installation
Climate range
Ambient room
temperature
^ Before installation remove the sealing
strip etc. from the outside of the
appliance and take any accessories
out of the inside of the appliance.
SN, N
ST
T
to +32 °C
to +38 °C
to +43 °C
^ Remove any cable clips from the rear
of the appliance.
The appliance will function perfectly
down to a temperature of +5 °C.
^ Check that all parts at the rear of the
appliance are unhindered.
30
Building in dimensions
F 311i-6
Building in a combination
31
Changing the door hinging
Before building the appliance in decide
on the door hinging. If left hand door
hinging is required follow these
instructions.
^ Unscrew hinge pin a.
^ Fit the appliance door on to the hinge
on the left hand side.
^ Screw in hinge pin a and fit cover
piece b on the right hand side.
^ Unscrew door coupling c (it will
need to be put back once the
appliance has been built in). Cover
the hole with the plug supplied d.
^ Tip the door backwards and remove
it in an upwards direction b.
^ Remove hinge pin c and plug d
and refit on the opposite side.
^ Remove cover e.
32
Building in the appliance
Preparing the appliance
All building in instructions given are
for a right hand hinged appliance.
If you have converted the appliance
to left hand hinging you will need to
adapt these instructions accordingly.
Building into a peninsular run
When built into a peninsular run, the
rear of the building in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
^ Screw the fixing piece to the
appliance.
Before installing the appliance the
housing unit must be carefully aligned
using a spirit level. The unit corners
must be at right angles, as otherwise
the furniture door will not align correctly
with the 4 corners of the appliance.
^ Shorten the sealing strip to the height
of the niche.
33
Building in the appliance
Building in
^ Push the appliance into the niche.
Make sure that the mains cable does
not get trapped.
^ Stick the sealing strip to the side of
the appliance on which the door is
opened.
^ Remove cover piece a if the niche
height is not much greater than the
height of the appliance.
^ Push the appliance into the niche
until the front edges of the hinge
plates b are flush with the front edge
of the housing unit above and below.
The upper edge of the cover piece
must not lie against the edge of the
housing unit.
^ Push the appliance against the
housing wall on the side on which the
door opens so that the sealing strip is
pressed into the housing wall c.
34
Building in the appliance
^ Align the door coupling so that the
furniture door on the side with the
handle does not lie against the
housing unit wall when the door is
shut. A minimum distance of 1 mm
must be maintained d.
^ Cover the remaining holes in the
appliance door with the plugs
supplied e.
^ Secure the appliance to the housing
unit above and below a using
screws.
^ Secure the door coupling piece b to
the appliance door at the height of
the handle.
On divided doors fit two coupling
pieces.
^ Open the doors completely and slide
the coupling guide c into the door
coupling piece.
^ Screw the coupling guide to the
furniture door. Maintain a distance "d"
(= the thickness of the housing unit
walls) between the edge of the
appliance door and outer edge of the
furniture door.
35
Alteration rights reserved / 1905
F 311 i-6
M.-Nr. 06 516 910 / 00
en - GB
|