Metra Electronics Appliance Trim Kit 99 7339B User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7339  
APPLICATIONS  
HYUNDAI GENESIS COUPE 2.0  
2010  
99-7339B  
99-7339S  
KIT FEATURES  
• ISO Head Unit Provision with Pocket  
• Painted to match factory finish  
99-7339B=Black 99-7339S=Silver  
KIT COMPONENTS  
A) Trim Panel B) ISO Brackets C) Pocket D) (6) PC-7503 Panel Clips E) (4) 3/8” Phillips Screws  
C
D
B
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)  
Wiring Harness:  
• 70-7303 - Kia/Hyundai Harness 2009 -up  
Antenna Adapter:  
• 40-KI11 - Kia/Hyundai Antenna Adapter 2007-up  
E
TOOLS REQUIRED:  
• Small Flat Blade Screwdriver • Phillips Screwdriver  
• Panel Removal Tool • Socket Wrench  
METRA. THE WORLD’S BEST KITS.™  
1-800-221-0932  
© COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION  
 
99-7339 DASH DISASSEMBLY  
HYUNDAI GENESIS COUPE 2010  
A
1
Disconnect the negative battery ter-  
minal to prevent an accidental short  
circuit.  
2
3
Unclip and remove the shifter trim  
panel. (Figure A)  
Unclip and remove the radio/climate  
control trim panel. (Figure B)  
4
Unclip and remove the display trim  
panel above radio. (Figure C)  
B
5
6
Remove (4) Phillips screws securing  
the radio.  
Remove (4) Phillips screws securing  
the climate control to the factory trim  
panel.  
C
1
 
99-7339 KIT PREPARATION  
KIT PREPARATION  
HYUNDAI GENESIS COUPE 2010  
A
1
2
Attach the climate control to the 95-  
7336S trim plate using the factory  
hardware. (Figure A)  
Attach the (6) panel clips to the 95-  
7336S trim plate. (Figure B)  
B
Continue to kit assembly  
2
 
99-7339 KIT ASSEMBLY  
HYUNDAI GENESIS COUPE 2010  
ISO DIN HEAD UNIT PROVISION  
A
1
2
Locate the factory wiring harness in  
the dash. Metra recommends using  
the proper mating adapter from Metra  
or AXXESS. Re-connect the negative  
battery terminal and test the unit for  
proper operation.  
Attach the ISO brackets to the after-  
market radio (figure A), then secure  
the assembly to the pocket using the  
(4) supplied Phillips screws (figure B).  
3
4
Mount the assembly into the sub  
dash.  
B
Reassemble dash in reverse order of  
disassembly using the 99-7339 trim  
panel instead of the factory trim  
panel.  
3
 
99-7339  
NOTES  
 
99-7339  
NOTES  
 
99-7339 INSTRUCTIONS  
INSTRUCTIONS  
306  
METRA. THE WORLD’S BEST KITS.™  
1-800-221-0932  
REV. 12/15/09 © COPYRIGHT 2003-2010 METRA ELECTRONICS CORPORATION INST99-7339  
 

Learning Resources Games LER 9504 User Manual
Lenovo Computer Monitor L2321x User Manual
Lenoxx Electronics Air Conditioner XC14 User Manual
Mackie Music Mixer Version 30 User Manual
Magnetek Remote Starter 188 10130 User Manual
Makita Cordless Saw DPC 7000 User Manual
Makita Grinder GA5010Z 5 User Manual
Master Appliance Glue Gun GG 100 User Manual
MB QUART Car Speaker PKC 113 User Manual
Melissa Blender 646079 User Manual