MPD8860
User’s Guide
Personal AM/FM Stereo
Compact Disc MP3 Player
Before operating this product,
please read these instructions completely.
SAFETY PRECAUTIONS (CONTINUED)
INFORMATION:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much
heat.
• Placed lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE:
We
WantYou
LISTENING
ForALifetime
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
EIA
Rocket launching pad
EST. 1924
Information courtesy of the Deafness Research Foundation.
3
LOCATION OF CONTROLS
1
2
13
14
15
16
17
18
3
4
5
6
7
8
19
20
9
10
11
21
22
12
1. DC 4.5V Jack (Rear of Unit)
13. HOLD (ON/OFF) Switch
14. PROG (Program) Button
15. Skip/TUNING n Button
z
2. Display
16. PLAY/PAUSE (®p) /POWER
3. RESUME/® Button
4. MODE/√ Button
5. PRESET UP L Button
6. PRESET DOWN M Button
7. ENTER/CLEAR Button
8. MENU/ESP/BAND Button
ON Button
17. Skip/TUNING o Button
18. STOP (I)/POWER OFF
Button
19. LINE OUT Jack (Side of Unit)
20. PHONES (Headphones) Jack
(Side of Unit)
9. Battery Compartment (Under
CD Compartment)
21. VOLUME Control
10. CD Compartment
22. DBBS (Bass Boost) Switch
11. FUNCTION (CD/RADIO)
Switch
12. CD Door Open Switch
4
POWER SOURCES
This CD player requires either two (2) “AA” cell batteries (not included) or
an AC adapter (not included).
BATTERY INSTALLATION
“Low Battery” will appear in the CD display when the batteries need
replacing.
1. Open the CD compartment, then open the
battery compartment door by pressing in on
the tab and then lifting it. To prevent the
possibility of losing the cover, it cannot
be removed.
2. Insert two (2) “AA” cell batteries (not
included) according to the polarity diagram
inside the battery compartment. Alkaline
batteries are recommended for the longest
playing time.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or Rechargeable) or old
batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included) to
an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC
4.5V jack on the rear of the unit and connect the other end into the AC outlet.
The batteries are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from
the wall outlet by pulling the plug (not the cord). Do not touch the AC
adapter with wet hands. Fully insert the plug without exposing any part of
the blade.
DC4.5V
z
5
OPERATION
TURNING POWER ON/OFF
BASS BOOST
1
1
1
2
To turn the unit on, press the
PLAY/PAUSE (®p)/POWER ON button
‚.
To turn the unit off, Press the STOP (I)
/POWER OFF button ƒ while in the Stop
mode.
To emphasize the bass, slide the
DBBS switch to the ON position. For
normal bass, slide the DBBS switch to
the OFF position.
HOLD
1
Slide to the ON position to disable the buttons; “Hold” will briefly appear in the
display. When pressing the buttons on the CD compartment lid, "Hold" will briefly
appear in the display. Slide to the OFF position to enable the buttons. For the HOLD
function, only the buttons on the CD compartment lid will be disabled, not the other
controls/switches.
AUTO POWER OFF
When the unit is stopped (Standby mode) for approximately one minute, the
power will automatically turn off.
Radio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb radio sound can
be heard through your home audio system. Before making any connections, turn
off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the rear
of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to
the amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV
or turn off the power to this unit.
6
RADIO OPERATION
TO LISTEN TO THE RADIO
1
2
3
2
2
1
1
Slide the FUNCTION switch 1 to the RADIO
position. Press the MENU/ESP/BAND
button 2 to select a band (AM or FM). If
listening to FM, press the MODE/√ button
3 to select Stereo or Mono.
Set the VOLUME control 1 to minimum
and plug the headphones into the
PHONES jack. Press the PLAY/PAUSE
(®p)/POWER ON button 2 to turn the
unit on.
3
4
3
1
2
1
2
Press and release the Skip/TUNING o Adjust the VOLUME control 1 and DBBS
1 or n 2 button to tune a station. Press
and hold the Skip/TUNING o 1 or n 2
button for rapid search tuning.
switch 2 as desired. If FM STEREO
reception is weak/noisy, press the
MODE/√ button 3 to select Mono, in this
case the reception will be monaural.
ANTENNAS
5
AM–This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM–The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
To turn the radio off, press the STOP
(I)/POWER OFF button.
AUTO SCAN
Press and hold the Skip/TUNING o or n
button for approximately 1 second and the
unit will automatically search for the next
available station.
7
RADIO OPERATION (CONTINUED)
TO SET AND RECEIVE A STATION INTO MEMORY
1
2
3
1
2
Tune a desired station as described in Within ten seconds, select the desired
the previous section. Press the PROG
button; the preset number will blink.
preset using the PRESET UP L 1 or
DOWN M 2 button. Press the PROG
button 3 to confirm.
3
1
2
To receive a preset station, simply press
the PRESET UP L 1 or DOWN M 2
button to select the desired preset.
8
CD OPERATION
TO INSERT AND PLAY A CD
This CD player is designed to play all kinds of Audio Discs and MP3 CD
Roms, such as CD recordables and rewritables. Do not try to play CDI,
CDV, DVD or computer CDs in this unit.
1
2
2
Open the CD compartment lid by
Press the PLAY/PAUSE (®p)/POWER
sliding the CD OPEN switch 1 to the ON button to begin playback; the
current track and elapsed playing time
(CD information and folder will also
appear, if using MP3) will appear in the
display.
right. Gently press a disc, label side
up, onto the spindle until it locks in
place. Close the CD compartment lid.
Insert headphones into the PHONES
jack. Slide the FUNCTION switch 2 to
the CD position.
3
4
1
2
When the disc is through playing, it will
stop. Press the STOP (I)/POWER
OFF button to stop the disc before it is
finished. Press the STOP (I)/POWER
OFF button again to turn the unit off.
Adjust the VOLUME control 1 and
DBBS switch 2 as desired.
9
CD OPERATION (CONTINUED)
CD PLAYBACK NOTES:
• See page 17 for more information on MP3’s.
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply
record “burn” only one session. You can find more information in your recorder’s
manual.
• This unit is capable of playing standard CDs or 3” singles; no adapter is
required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “No Disc”
will appear in the display.
• If a disc is not recorded properly, a disc error will occur and “Invalid Disc” will
appear in the display.
• Playback will stop when you open the CD compartment, but it is not
recommended to open the compartment before the STOP (I)/POWER OFF
button is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin
playback, depending on the number of tracks burned on the CD.
TO PAUSE A CD
2
1
During CD playback, if you wish to
pause the disc momentarily, press the
Press the PLAY/PAUSE (®p)
/POWER ON button again to release
PLAY/PAUSE (®p)/POWER ON but- pause and resume playback. The
ton. Playback stops but the disc con- sound returns, “PAUSE” will disappear
tinues to spin, the elapsed time will and the elapsed time in the display
blink and “PAUSE” will appear in the stops blinking.
display.
10
CD OPERATION (CONTINUED)
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
1
2
After you insert the disc into the CD When the desired track number (and
player and the total number of tracks file number if using MP3) appears in
appear in the display, you may press the display, press the PLAY/PAUSE
either the Skip/TUNING o 1 or n 2 (®p)/POWER ON button. Playback will
begin with the track (or file) you select-
ed.
button to select a specific track for
playback.
FORWARD/REVERSE SKIP TRACK
1
2
During playback, press and release During playback, press and release the
the Skip/TUNING n button once to Skip/TUNING o button once to move
advance the player to the beginning of the player back to the beginning of the
the
next
track.
Press
the currently playing track. Press the
Skip/TUNING n button repeatedly to Skip/TUNING o button repeatedly to
move the player back to lower-num-
bered tracks.
advance the player to higher-num-
bered tracks.
11
CD OPERATION (CONTINUED)
HIGH-SPEED MUSIC SEARCH
During playback, depress and hold
either the Skip/TUNING o 1 or n 2
button to move the player forward or
backward within a track to locate a
specific musical passage. The player will
move forward or backward at high
speed as long as the buttons are
depressed. When you release the
Skip/TUNING o 1 or n 2 button,
normal playback will resume.
1
1
2
REPEAT PLAYBACK OF ONE TRACK
1
2
2
3
To repeat a single track, while in the When the desired track number
Stop mode, press the MODE/√ button appears in the display, press the
1 once; “REP 1” will appear in the
display. Press the Skip/TUNING o 2
or n 3 button to select the specific
track that you wish to repeat.
PLAY/PAUSE (®p)/POWER ON but-
ton to begin playback. The "REP 1"
indicator will disappear from the display
after a few seconds and the specific
track you selected will be repeated con-
tinuously.
TO CANCEL REPEAT PLAYBACK OF ONE TRACK:
1. Press the STOP (I)/POWER OFF button to stop playback, the "REP 1"
indicator will appear again, press the MODE/√ button repeatedly until the
MODE indicators disappear from the display.
2. Press the MODE/√ button once, the “REP A” indicator will appear in the
display. Press the MODE/√ button repeatedly until the Mode indicators
disappear from the display to return to normal playback.
12
CD OPERATION (CONTINUED)
REPEAT PLAYBACK OF ALL TRACKS
1
2
To repeat all the tracks on the CD,
press the MODE/√ button twice;
“REP A” will appear in the display.
Press the PLAY/PAUSE (®p)/POWER
ON button to begin playback. The "REP
A" indicator will disappear from the dis-
play after a few seconds and all tracks
on the disc will be repeated
continuously.
REPEAT PLAYBACK OF A FOLDER (MP3 w/folders only)
1
2
2
3
To repeat all files in a directory (MP3
CD only), press the MODE/√ button
1 three times; “REP D” will appear in
the display. Press the Skip/TUNING o
2 or n 3 button to select the specific
directory that you wish to repeat.
Press the PLAY/PAUSE (®p)/POWER
ON button to begin playback. The "REP
D" indicator will disappear from the display
after a few seconds and all files in the
selected directory will be repeated contin-
uously.
TO CANCEL REPEAT PLAYBACK:
1. Press the STOP (I)/POWER OFF button to stop playback, the "REP A" or
“REP D” indicator will appear again, press the MODE/√ button repeatedly
until the MODE indicators disappear from the display.
2. Press the MODE/√ button once, the “REP D” or “INTRO” indicator will appear
in the display. Press the MODE/√ button repeatedly until the Mode indicators
disappear from the display to return to normal playback.
13
CD OPERATION (CONTINUED)
INTRO PLAYBACK (Will play the first 10 seconds of each track)
1
2
While in the Stop mode, press the
MODE/√ button 3 times (4 times if an
MP3 CD with multiple directories is
inserted); “INTRO” will appear in the
display.
Press the PLAY/PAUSE (®p)/POWER
ON button to begin Intro playback. The
"INTRO" indicator will disappear from
the display after a few seconds and the
first 10 seconds of all tracks on the disc
will be played in sequence.
TO RANDOMLY PLAY BACK A CD
1
2
While in the Stop mode, press the
MODE/√ button 4 times (5 times if an
MP3 CD with multiple directories is
inserted); “RANDOM” will appear in
the display.
Press the PLAY/PAUSE (®p)/POWER
ON button to begin playback. The
"RANDOM" indicator will disappear from
the display after a few seconds and the
unit will play all the tracks in random order.
When all the tracks have been played, the
unit will stop.
TO CANCEL INTRO OR RANDOM PLAYBACK:
1. Press the STOP (I)/POWER OFF button to stop playback, the selected
indicator will appear again, press the MODE/√ button repeatedly until the
MODE indicators disappear from the display.
2. If in INTRO mode, press the MODE/√ button once, the “RANDOM” indicator
will appear in the display. Press the MODE/√ button until the Mode indicators
disappear from the display to return to normal playback. In Random mode,
press the MODE/√ button once to return to normal playback.
14
CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
1
2
1
2
While in the Stop mode, press the PROG Select a track to be programmed using the
button. The track number will blink and
“P-01” will appear in the display.
Skip/TUNING o 1 or n 2 button. If using
a MP3 disc, see note below.
3
4
Press the PROG button to memorize
the track. Repeat steps 2 and 3 to
program additional tracks up to a
maximum of 24 tracks.
Press the PLAY/PAUSE (®p)/POWER
ON button to begin program playback.
NOTES:
•
While in the Stop mode and “P” is in the display, press and hold the
ENTER/CLEAR button for 2 seconds to clear the memory.
•
MP3: If an MP3 CD is inserted, you will first select the directory number in
step 1, press the PROG button and then enter the file/track number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
15
CD OPERATION (CONTINUED)
NOTES ON PROGRAM PLAYBACK
•
You can review the program by pressing the PROG button repeatedly
while in the Stop mode.
•
To add a track to the program memory, simply press the PROG button
repeatedly until the track (directory if using an MP3) appears and “00”
blinks in the display, then continue as per the steps 2 and 3 on the
previous page.
•
•
•
Press the STOP (I)/POWER OFF button to stop the program before it is
finished (the program memory will be kept).
Each file may be stored in the program memory as many times as desired
(up to 24 files).
You can scroll through the program while it is playing using the
Skip/TUNING o or n button.
ESP (ELECTRONIC SKIP PROTECTION)
This feature protects against loss of sound caused by vibrations and shocks.
Continuous playback is ensured once some of the music has been stored
into memory.
ESP will automatically be activated when listening to standard or MP3 CDs.
You cannot deactivate ESP while listening to an MP3 CD. However, you can
deactivate it when playing a standard CD by simply pressing the
MENU/ESP/BAND button; the ESP indicator will disappear from the display.
Deactivating the ESP will conserve battery life.
RESUME
This unit has Auto resume, which will resume playback of the previous track
when the unit is turned on (and the same CD is still in the CD compartment).
The RESUME/® button will allow you to resume playback of a CD that was
previously stopped. If you stopped a CD in the middle of playing, simply
press the RESUME/® button and the CD will continue at the beginning of the
previously stopped track.
16
CD OPERATION (CONTINUED)
MP3 FAQs–Frequently Asked Questions
Please read before playing an MP3 CD.
Does the unit support packet write CD-RW?
Yes, it can. You can add or delete MP3 files without
reformatting. It appears like a PC hard drive.
Can the unit read regular music CDs?
Yes, it can. However you can not mix MP3s and WAV files on
the same CD. If you do this your Portable MP3 CD Player will
play only the MP3 files.
Does the unit have Electronic Skip Protection built-in?
Yes, it has an anti-shock buffer (45 seconds for standard CD
and 120 seconds for MP3 CD). What it means for the
everyday user is that it can withstand road bumps, shaking,
etc. There will be no skipping when you jog or run on a tread-
mill or drive on a bumpy road.
Can I use the MP3 extension for non-audio data files?
No, this may result in serious malfunction and harmful noise
interference.
Can I mix MP3 files with other file types on the CDR?
Yes, but your Portable MP3 CD Player will ignore those files
and read only the MP3 files on the CDR.
Does the unit support multi-session CDRs?
If the MP3 CD is not finalized, you can burn a new group of
MP3 files until the CD is full.
Does the unit support subdirectories (subfolders)?
Yes, the unit can read MP3 files from subfolders.
What appears on the display when playing back MP3 CDs?
The album, title and artist (if set when MP3 was recorded).
17
CD OPERATION (CONTINUED)
SELECTING SONGS BY MP3 TITLE
You can search for a song by title as follows:
1
2
2
4
With an MP3 disc inserted, press the Select the first letter of a file you would
MENU/ESP/BAND button; the alpha-
bet will appear in the display.
like to listen to using the MODE/√
1
and/or RESUME/® 2 buttons. Press
the PRESET DOWN M button 3 to
access the lower letters or PRESET
UP L button 4 to access the higher
letters.
3
4
3
When the desired file appears, press
the ENTER/CLEAR button and the file
will automatically start playing.
Press the ENTER/CLEAR button 1
and a list of files starting with the
selected letter will appear. Press the
MODE/√ 2 and/or RESUME/® 3
buttons to scroll through the list.
NOTE:
If you select a letter that does not contain any files, “No File” will appear
in the display.
18
CD OPERATION (CONTINUED)
SEARCHING THROUGH MP3 DIRECTORIES
You can search the contents of the directories (if burned on CD) as
follows:
1
2
2
Press the MENU/ESP/BAND button To select a file from the directory, use
twice; the first directory will appear in
the display, as well as its contents.
the MODE/√ 1 and/or RESUME/® 2
buttons.
3
4
1
2
If you would like to change directories, When the desired file appears, press
the ENTER/CLEAR button and the file
will automatically start playing.
use the PRESET L 1 and/or M 2
buttons.
19
CD OPERATION (CONTINUED)
SINGLE SESSION
The chart below is an example of a Windows Explorer display that will
appear on your computer monitor for a single session MP3 CD ROM with
directories/albums. Check the added notes to help you understand the
MP3 CD unit display and the playback sequence of directories/albums
and tracks on a single session MP3 CD.
MULTI SESSION
The computer user does not need to finalize the CDR disc as music is
burned on the CD. Because of this, the music can be downloaded at
different times until the whole CD is full.
(E) CD-ROM drive
Directory 01
Skipped
Blur01.mp3
Blur02.mp3
Blur03.mp3
Blur04.mp3
Blur.jpg
Lyric.doc
Directory 02
Directory 04
Spice05.mp3
Spice06.mp3
Girl09.mp3
Girl10.mp3
Directory 03
Directory 05
2men07.mp3
2men08.mp3
Boyz11.mp3
Boyz12.mp3
Skipped
Directory 06
Bread13.mp3
Abba01.wav
Abba02.wav
Directory 07
Marx14.mp3
Twain15.mp3
NOTES:
• The arrow pathway shows the sequence of MP3 directory and file
playback.
• This example has a total of seven MP3 directories.
• Based on this layout, the first file will be “Blur01.mp3” and the last file
will be “Twain15.mp3”.
• “Skipped” denotes a directory which contains non-audio files only, e.g.
jpg, wav, etc. These cannot be detected nor played on this player.
When an album contains mixed format files, the non-MP3 files will be
skipped.
20
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact disc only by its edges. Never allow your
fingers to come in contact with the shiny, unprinted
side of the compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to
the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
If a compact disc skips or gets stuck on a section of the compact disc, it is
probably dirty or damaged (scratched).
Z
•
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular
motions.
•
•
Compact discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures or dust, etc. Prolonged exposure or extreme temperatures can
warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink, may damage the surface.
Cleaning the Unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a dry cloth may be used on the front panel.
21
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
CAUSE
SOLUTION
Dead batteries, or not Replace batteries, and install
turn on.
installed properly.
Weak or dead
batteries.
properly.
Recharge batteries.
AC adapter
not connected.
CD compartment
not closed.
Check AC adapter
connection.
Close CD compartment.
Disc will not play.
Disc inserted
incorrectly.
Dirty or defective
disc.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
Dirty or defective
disc.
Clean or replace disc.
No sound from
headphones.
Headphone
plug not inserted
correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
ESP is not activated.
Station not tuned
Increase volume.
Replace batteries.
Try another disc.
Press the MENU/ESP/BAND button.
Retune AM or FM
ESP not working.
Noise or sound
distorted on radio.
properly for AM or FM
.
broadcast station.
FM: Headphone wire
not extended.
Extend Headphone wire.
AM: Unit is not
Rotate unit until best
reception is obtained.
Retune station.
Press MODE button to turn
on Stereo.
positioned correctly.
Poor FM signal.
MODE button
FM STEREO indicator
does not light.
not set to Stereo.
No sound.
FUNCTION switch is not Set FUNCTION switch to the
in the desired position. desired function.
22
SPECIFICATIONS
Power Requirement DC............................2 x AA (LR6) Alkaline batteries
Power Requirement AC .................DC IN 4.5 V adapter (Center positive)
Output level (Line out) ..............................................0.6VMS (47K Ohms)
Output level (Headphone) .............................................16mW (32 Ohms)
MPEG Rate ............................................................................32-384Kbps
Sampling Frequency ..................................8/11.025/12KHz for MPEG2.5
16/22.05/24KHz for MPEG2
32/44.1/48KHz for MPEG1
MP3 Playback ................................................ISO9660 format compatible
Frequency Range (FM) .......................................................87.5–108MHz
Frequency Range (AM) .......................................................530–1720kHz
Check the CD burner/recorder’s documentation to see if it complies with
these specifications.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE
VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT
1-800-321-6993.
23
|