Introduction
Thank you for purchasing the LINDY PCI two Port Serial. This card is
equipped with two high speed RS-232 serial interfaces.
The serial ports include 128Byte FIFO with speeds up to 921Kb/Sec.
Port Specification
PCI 2S (16C950 128 FIFO)
Serial Port:
•
•
Chipset: Oxford uPCI952, 128Byte FIFO
Compatible chips: with 16C950, 16C750, 16C650, 16C550,
and 16C450.
User Manual
English
•
•
IEEE standard: RS-232 Interface
Max. Speed: Up to 921Kb/Sec (HYPER Terminal program)
Package Contents
ꢀ
ꢀ
ꢀ
1 x LINDY PCI 2S Card
LINDY User manual
LINDY Driver CD
LINDY No. 51236
Installation
Technical Specifications
1. Turn off the power of your computer and remove the power
•
•
Compatibility: PCI 32Bit card for 486, 586, Pentium,
cable
Pentium-II, P-III, P4, C5, K6, K7
Operating system: WIN 9.x, ME, NT, 2000, XP, 2003
Server, VISTA, WIN7, LINUX,
Chipset: Oxford uPCI952
Connections:
Serial: 2 x DB9 Male
2. Install the PCI card into an available PCI slot in your computer
3. Connect the peripheral ie Printer, Modem, etc. to the adapters
port
4. Re-connect the power cable & turn on the power of your
computer
•
•
PCI device listing display (for example…)
•
PCB: 2 Layer / 120 x 76 mm
Bus Device Func
Vendor ID Device
ID
Device Class IRQ
IDE Controller 14
No
No
No
0
7
1
8086
1409
7010
0
13
0
7168 Simple COMM. 10
Controller
If the Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an
error occurs, please try another PCI slot.
Once the hardware has installed correctly you can start installing the
software from the driver CD.
Pin Assignments
Serial 9 Pin male connector pin assignments:
Serial 9 Pin male connector :
Pin
1
2
Signal
CD
RD
Pin
4
5
Signal
DTR
GROUND
Pin
6
7
Signal
DSR
RTS
Pin
8
9
Signal
CTS
RI
3
TD
|