®
COMPACT DISC PLAYER
AM/FM STEREO CASSETTE RECORDER
WITH DETACHABLE SPEAKERS
MODEL CD-1492
OPERATING INSTRUCTIONS
PLAYS MUSIC COMPACT DISCS
FULLY PROGRAMMABLE CD PLAYER WITH REPEAT
RECEIVES AM/FM STEREO BROADCASTS
BASS BOOST SWITCH
RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE
DETACHABLE SPEAKER SYSTEM
FM STEREO AND POWER LED INDICATORS
2 WAY POWER - AC/DC
•
•
•
•
•
•
•
•
REQUIRES 8 SIZE “D” BATTERIES
•
PLEASE READ CAREFULLY BEFORE USE
IB-CD1492(AD)-WM-E-031402
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CD’s.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the bottom of the set.
2
IB-CD1492(AD)-WM-E-031402
LOCATION OF CONTROLS
14
15
13
16
12
17
11
FRONT VIEW
18
10
19
20
9
8
7
21
22
22
31
30
23
REAR VIEW
29
27 26 25 24
28
CONTROL PANEL
1
2
4
5
3
6
32
33
37
36
35 34
33 32
1. CD STOP BUTTON
2. CD BACKWARD SKIP/SEARCH BUTTON
3.FUNCTION SWITCH
4. CD PLAY/PAUSE BUTTON
5. CD FORWARD SKIP/SEARCH BUTTON
6. BAND SWITCH
7. VOLUME CONTROL
8. FM STEREO INDICATOR
9. POWER SWITCH
10. POWER/BATT. LAMP
11. CD RANDOM BUTTON
12. CD PROGRAM/REPEAT BUTTON
13. CD REPEAT LAMP
20.CD PLAY/PROGRAM LAMP
21.TUNING CONTROL
22. DETACHABLE SPEAKERS
23.CASSETTE DOOR
24.CASSETTE PAUSE BUTTON
25.CASSETTE STOP/EJECT BUTTON
26.CASSETTE FAST FORWARD BUTTON
27.CASSETTE REWIND BUTTON
28.CASSETTE PLAY BUTTON
29.CASSETTE RECORD BUTTON
30.STEREO PHONES JACK
(headphones not included)
31.BUILT-IN CONDENSER MICROPHONE
32.SPEAKER PLUGS
14. FOLDING HANDLE
15. CD DOOR
33.DETACHABLE SPEAKER LOCKS
34.AC SOCKET
35.FM TELESCOPING ANTENNA
36.SPEAKER JACKS
16. CD DOOR OPEN/CLOSE AREA
17. COMPACT DISC DISPLAY
18. AM/FM DIAL SCALE
19.BASS BOOST SWITCH
37.BATTERY COMPARTMENT DOOR
3
IB-CD1492(AD)-WM-E-031402
INTRODUCTION
Your new COMPACT DISC PLAYER WITH AM/FM STEREO CASSETTE RECORDER
is a specially designed all solid state set which, with proper care, will give you years of
trouble-free service. Please read these operating instructions carefully as they will
help you obtain maximum performance from this set. Unpack the set carefully and
place it on a level surface, away from sources of excessive heat, such as radiators.
POWER SUPPLY- 2 WAY SYSTEM
This set is designed to be operated from two different power sources as
listed below:
A. DC OPERATION
This set runs on 8 size “D” batteries. For best performance, always use heavy duty
alkaline batteries.
TO INSTALL BATTERIES
1.Remove the BATTERY DOOR by gently pushing tabs downward and outward.
2.Install 8 size “D” batteries.
NOTE: The battery compartment has 2 levels,
upper and lower. Be sure to install the
batteries as per the sketch shown
and the indication on the back of the set.
3.Replace the BATTERY DOOR.
NOTE: Old batteries may swell and leak. To
avoid damage to your set, remove the
batteries when the set is to be stored for
long periods of time or if the batteries
become exhausted (when the batteries
NOTE: The negative polarity
(side) of battery
become weak, the POWER/BATT. lamp will
be dim; when the batteries are completely
dead, the POWER/BATT. lamp will be off).
touches the spring.
NOTE: To use your set on battery power, you MUST remove the AC power cord
from BOTH the wall outlet AND the back of the set.
NOTE: Do not mix old and new batteries. Do not mix rechargeable (nickel cadmium)
and regular carbon zinc or alkaline batteries. Installation of batteries should
be done by an adult (for safety).
BATTERY INDICATOR
The POWER lamp also shows you if your batteries are fresh. When this lamp
gets dim, it is time to replace the batteries.
B. AC OPERATION
Plug the AC power cord into the back of the set and insert the AC PLUG into 120 Volts
AC 60Hz standard household outlet.
NOTE: This cord is polarized. This means either
end of the cord will only fit ONE way into
the socket or wall outlet. If it does not fit, do
not force it, just reverse it and try again.
NOTE: If the AC power cord is plugged into the
back of the set, the set will not work on
batteries. To operate the set on batteries,
remove the AC PLUG from the back of the
POLARIZED AC PLUG
set.
4
IB-CD1492(AD)-WM-E-031402
ATTACHING THE SPEAKERS
NOTE: The right and left speakers are NOT
interchangeable. The right speaker
fits only on the right side (as shown
in FIG. 1). The left speaker fits only
on the left side.
1.Bring the right speaker to the right side
of the set.
2.Raise the right speaker box about 4
inches above the set. Align the
tracks (rails).
FIG.1
3.Fit speaker over the side rails.
4.When speaker fits over the rails, lower
the speaker as shown in FIG. 2, and make
sure the tabs snap into the speaker
box (locks in the back).
5.Repeat above steps 1 to 4 for the left
speaker box.
FIG.2
6.Carefully unwind the speaker wire from behind each speaker box and plug the right
plug into SPEAKER JACK R, also plug the left plug into SPEAKER JACK L (as shown in
FIG. 3). Wrap the remaining wire behind each speaker box.
LOCK TAB
FIG.3
NOTE: This set can be used with speaker boxes attached to the main set or
separated, just make sure both speaker plugs are plugged into the jacks.
To remove the speakers, press the lock tab and raise the speakers.
5
IB-CD1492(AD)-WM-E-031402
BASS BOOST SWITCH
This set has a BASS BOOST switch which allows you to hear more bass (low frequency)
sounds. You may press it ON or OFF to your taste (Bass means low frequency
sounds like a bass drum).
STEREO HEADPHONE JACK
A STEREO PHONES jack has been provided on the front of the set so that you can
listen to the set without disturbing others. To use this jack, plug in low impedance
stereo headphones (not included) and adjust the VOLUME CONTROL to your taste.
Special internal switches will turn off the set’s speakers when you plug in the stereo
headphones.
TO PLAY THE RADIO
Make sure the speakers are connected (plugged into the jacks in the back of the set).
1. Press the POWER switch (the POWER/BATT. lamp will light).
2. Slide the FUNCTION switch to the RADIO position.
3. Select desired wave band (AM, FM or FM STEREO) with the BAND switch.
4. Tune to desired station with the TUNING CONTROL.
5. Gently turn this control back and forth until you get the strongest, clearest sound.
6. The built-in AM antenna and the FM Telescoping Antenna are directional. When
receiving FM broadcasts, carefully extend the FM Telescoping Antenna to its full
length. The strongest reception can be achieved by rotating the set or the FM
Antenna.
7. Adjust the VOLUME CONTROL to your listening preference.
8. If you prefer more bass, press the BASS BOOST switch.
9. To turn off the radio, slide the FUNCTION switch to TAPE position. To shut the
power off, press the POWER switch again, the POWER/BATT. lamp will go off.
NOTE: FM Stereo is weaker than FM (mono). If your FM stereo station is weak or
you hear too much noise or hissing, try to adjust the FM Telescoping Antenna
or slide the BAND switch from FM STEREO to FM.
6
IB-CD1492(AD)-WM-E-031402
CD OPERATION
HANDLING A DISC
Although built to withstand a certain amount of the effects from dust, soil and scratches,
discs should be treated with the care normally according to conventional analog discs
(records). Always protect a disc against scratches, soil and dust etc. We recommend
that during non-use periods, the discs should be stored in their original cases.
Since any dirt, scratches or warping of the disc can cause
skipping or intermittent sound or noise, bear in mind the
following points:
When holding the discs, take care not to touch the playing
surface.
•
HANDLE DISC AS SHOWN
Store the discs in their cases. Return them to their cases
with the label surface facing up and push down lightly on
the label surface.
•
Do not place discs near a heating device or a place where
the temperature is high or in dusty areas.
•
Do not write on the label surface using a ballpoint pen and
do no stick labels on the CD.
•
Wipe away any fingerprints or dust on the playing surface
of a disc using a soft cloth.
•
Bear in mind the following points when cleaning your discs:
- Always wipe from the inside toward the outside of the disc.
- Never in a circular motion.
- Do not use conventional record cleaners, anti-static agents,
CLEAN FROM CENTER TO EDGE
benzene, thinner or other solvents.
PLAYING A CD (COMPACT DISC)
1. Press the POWER switch on and slide the FUNCTION switch to the CD position, the
POWER/BATT. lamp will light and the DISPLAY will show 2 zeros “
”.
2. Press the CD door OPEN/CLOSE area to open the CD door.
3. Insert a CD with the LABEL side facing UP (if the disc is upside down or
damaged, the DISPLAY will show 2 zeros “ ” and then “ ”).
4. Close the CD door by gently pushing the door down.
5. The DISPLAY will show 2 zeros “
tracks (songs) on the CD.
” and then the total number of
Total tracks
6. To start the music, press the CD PLAY/PAUSE button (wait a few seconds for music
to start). The first track number “ ” will appear in the Display, the PLAY/PROGRAM
lamp will light and the disc will start playing.
7. Adjust the VOLUME CONTROL to your taste. For extra bass sound, press the BASS
BOOST switch down.
8. To pause the music - if the phone rings or other reasons, press
the PLAY/PAUSE button, the track number will flash to remind
you that you are in pause mode.
9. To resume the music from pause, press the PLAY/PAUSE button again. The track
number will be steady on (not flashing).
10. To stop playing music, press the CD STOP button.
11. To turn off the CD, slide the FUNCTION switch to TAPE position. To shut the power
off, press the POWER switch again, and the POWER/BATT. lamp will go off.
7
IB-CD1492(AD)-WM-E-031402
CD OPERATION
REMOVING A DISC
1. Make sure the CD is not playing before removing the disc. If it is, press the CD
STOP button.
2. Press the CD door OPEN/CLOSE area to open the CD door.
3. Gently remove the disc.
4. Close the CD door by gently pushing the door down.
5. Replace the disc in its original case.
NOTE:Never press the CD door down during play, this may cause malfunction or
damage to the disc. Always stop the CD player by pressing the CD STOP
button before you take the disc out of the compartment.
NOTE: If you hit or move the set during play, the music will stop for a
second or two and then start again. This is normal operation
for all portable CD players.
SKIPPING TRACKS (SEARCH)
1. This function enables you to find the beginning of any desired track during play. If the
CD FORWARD SKIP/SEARCH (
) button is pressed once or repeatedly, the NEXT
TRACK or one of the following tracks will be selected. The DISPLAY will show the
track or song number.
2. If the CD BACKWARD SKIP/SEARCH (
) button is pressed twice or more in rapid
succession, play will go BACK one track per press.
3. When the set is in the pause mode, it is also possible to select the beginning of a
certain track by using the CD FORWARD SKIP/SEARCH(
SKIP/SEARCH( ) button to reach the desired track. After selection, press PLAY.
4. During play, press and HOLD the CD FORWARD SKIP/SEARCH( ) button to search
forward at a high speed for a particular point of a song. Press and HOLD the CD
BACK SKIP/SEARCH( ) button to search backward. Release the button to resume
) button and CD BACK
normal play when the point is found.
REPEAT PLAY - SINGLE SONG
To repeat the SAME song over and over again, do the following:
1. When the CD is playing, press the REPEAT/PROGRAM button once.
2. The REPEAT lamp will be steady on. The song
currently playing will play over and over, till you press
Stop.
3. To stop the repeat function, press the REPEAT/PROGRAM
button twice.
REPEAT LAMP ON
REPEAT PLAY - ALL SONGS
To repeat play ALL SONGS on a disc and then play them again and again, do the
following for non stop music.
1. When the CD is playing, press REPEAT/PROGRAM
button twice.
2. The REPEAT lamp will be flashing. All the songs
on the CD will play in order and then start all
over again.
REPEAT LAMP FLASHING
3. To stop the repeat function, press the REPEAT/
PROGRAM button once.
8
IB-CD1492(AD)-WM-E-031402
CD OPERATION
RANDOM PLAY
1. Press RANDOM button either in stop mode or normal play mode, the set will play all
of the songs in random order. The DISPLAY will show some moving symbols like
“
...
...
” every 5 seconds.
2. Press the FORWARD SKIP/SEARCH
button to skip to the next random song.
3. To resume normal play, press RANDOM button again.
PROGRAMMED MEMORY PLAY
Up to 16 tracks can be programmed for disc play in the order you like.
Programming can only be done during STOP mode.
NOTE: Under some conditions you may be able to program more than 16 tracks.
PROGRAMMED (MEMORY) PLAYBACK
1. During STOP mode, press REPEAT/PROGRAM button.
2. The Display will show “
”.
3. Press the SKIP/SEARCH buttons either
or
until the desired track shows on the DISPLAY. The
PLAY/PROGRAM lamp will flash.
4. Press the REPEAT/PROGRAM button. The Display will
show “
” and the PLAY/PROGRAM lamp will flash.
5. Repeat steps 3 and 4 until all the desired tracks are
programmed.
PLAY/PROGRAM
LAMP FLASHING
NOTE: For programmed tracks from 11th to 16th, the
display will separately show
“
”,
“
”, “ ”, “ ”, “ ” and “
” .
6. When you finished programming, press the CD PLAY/PAUSE button.
7. All songs will play in the order you programmed.
8. The DISPLAY will show the track number being played, and the PLAY/PROGRAM lamp will
remain flashing during programmed play.
9. If in middle of play, you want to hear the next programmed song, press
the FORWARD SKIP/SEARCH
.
10. When all the songs have finished playing, the set will stop. The PLAY/PROGRAM lamp
turns off.
11. To turn off the power, remember to press POWER switch again, the POWER/BATT.
lamp will go off.
NOTE: Programming can only be done when the CD is in the STOP mode. (CD is in
the set, FUNCTION switch is in the CD position and DISPLAY shows the total
CD tracks.)
EXAMPLE: To program track 4 to play first.
When CD has stopped,
Press REPEAT/PROGRAM button, “
” will show and PLAY/PROGRAM lamp will flash.
Press the FORWARD SKIP/SEARCH button till track 4 appears.
The DISPLAY will show “ ” and PLAY/PROGRAM lamp will flash.
•
•
•
•
•
•
Press REPEAT/PROGRAM button, “ ” will show and PLAY/PROGRAM lamp will flash.
Press PLAY BUTTON.
Track 4 will play first.
NOTE: The programmed memory will be cleared if CD door is opened or power is
turned off.
9
IB-CD1492(AD)-WM-E-031402
CASSETTE OPERATION
NOTE: All of the tape buttons (except the CASSETTE PAUSE button and CASSETTE STOP/
EJECT button) operate in the same fashion. To activate a feature, you press the
button all the way down so that it stays in its depressed position when you
release it. To deactivate the feature, press CASSETTE STOP/EJECT button.
FAST FORWARD AND REWIND
For fast forward or rewinding of the tape, press the CASSETTE FAST FORWARD
button or CASSETTE REWIND button.
PAUSE
The CASSETTE PAUSE button is used to edit commercials or in case recording is
temporarily interrupted. Since the deck motor is still running while the PAUSE button is
depressed, this pause feature should be used for a short time only.
AUTOMATIC STOP
This set has a built-in automatic stop feature and the tape mechanism will stop playing
or recording and shut itself off when it has reached the end of the tape.
MANUAL STOP
The tape player can be stopped manually by pressing the Cassette STOP/EJECT
button.
CASSETTES
CASSETTE TAPE SELECTION
The quality and condition of the cassette tapes you use will have a direct effect on
the performance of this set.
Low quality tapes tend to be broken and stretched and a broken tape can easily
become entangled in the drive mechanism, causing major damage. Stretched tapes
will run at uneven speeds and will distort anything recorded on them.
Use only well-known brands of tapes.
Use of C-120 (120 minutes) cassette is not recommended. The extreme
thinness of this tape may result in breakage or other failures.
•
•
This set is not designed for CrO2, Fe-Cr or METAL tape use. Therefore, be sure
to use name brand normal cassette tapes. You may use the above (special)
•
tapes, but the best sound quality is from normal bias tapes.
CASSETTE TAPE FOR RECORDING
Generally, a fresh blank tape is most desirable for use when recording. A tape with
previously recorded information can also be used since this set erases the tape in
the recording process, providing the Record Interlock defeat tabs are in place. For
more information on these tabs, see PROTECTING CASSETTE TAPE AGAINST
ERASURE on page 15.
10
IB-CD1492(AD)-WM-E-031402
IMPORTANT NOTES CONCERNING CASSETTE TAPES
1. After a period of time, especially when inexpensive brands of tapes are used,
the sound during playback may become “muffled” or, in extreme cases, almost
inaudible.
This is most frequently NOT A FAULT OF THE SET ITSELF but merely a deposit of
oxide and other dirt on the tape heads.
The easiest way to solve this problem is by using a head-cleaning cassette. Follow
the instructions provided with the cleaner carefully.
The tape head is a delicate precision component and serious damage will result if
you attempt to scrape dirt away with a sharp tool.
2. Other common causes of trouble are:
(a)Tapes jamming - leading to uneven speed during playback.
(b)Tapes tangling - where the tape wraps itself around vital parts of the
mechanism.
To reduce the chances of these problems occurring, you should take the following
precautions:
(1)Check that there are no loose layers of tape visible through the cassette center
window (see FIG. 1). Tighten these loose layers of tape using a pencil before
inserting the cassette into the set (see FIG. 2).
(2)If the cassette feels tight while performing the operation as shown in FIG. 2, the
tape may be jamming due to “ridges” in the winding of the tape (visible through
the center window). These may be removed in most cases by fast winding the
cassette from one end to the other and back again, or the tape may be permanently
damaged. Do not play damaged or worn out tapes, as this may cause your set to
break.
FIG. 1
FIG. 2
NOTES FOR STORING CASSETTE
TAPES
1. Do not put
a
cassette near
a
magnetic
field, such as a TV, or speaker. Magnetic
fields may reduce the tape sensitivity or even
erase the recording.
2. Do not store cassette for any length of time
in a hot, moist or dusty place.
11
IB-CD1492(AD)-WM-E-031402
TO PLAY A CASSETTE TAPE
FULL
REEL
EMPTY
REEL
1. Open the CASSETTE DOOR by pressing the CASSETTE STOP/EJECT button (in
some cases, you may have to press the CASSETTE STOP/EJECT button twice
since this button has combined functions).
2. Insert the cassette tape, with the exposed tape facing downwards, into the tracks in
the CASSETTE DOOR with the full reel on the left side, make sure the tape inside is not
slack or loosely wound. If it is, insert a pencil into the reel and turn until the tape is
wound up (see Page 11).
3. Close the CASSETTE DOOR.
4. Make sure the FUNCTION switch is in the TAPE position and the POWER switch is ON
(pressed down), the POWER/BATT. lamp will light.
5. Press the CASSETTE PLAY button. The cassette tape will play till it reaches the end
and then stop.
NOTE: If the CASSETTE PLAY button does not stay down, your tape may
have reached the end of the tape, reverse the tape or press
Rewind.
6. Adjust the VOLUME CONTROL and BASS BOOST switch to your listening preference.
7. To stop the tape manually, press the CASSETTE STOP/EJECT button.
8. To remove the tape, press the CASSETTE STOP/EJECT button again and the
CASSETTE DOOR will open.
SIDE A
SIDE B
To listen to the other side of the tape:
Remove the cassette tape, reverse it and re-insert into cassette compartment to play
the other side of the cassette tape.
To shut the power off, press the POWER switch again, the POWER/BATT. lamp will go off.
12
IB-CD1492(AD)-WM-E-031402
AUTOMATIC LEVEL CONTROL (ALC)
This set has the latest Automatic Level Control circuitry, therefore, it is not
necessary to adjust the VOLUME CONTROL when recording. This circuit automatically
records at the correct level and prevents over loading.
NOTE: While recording, you may adjust the VOLUME CONTROL or BASS BOOST switch
as you desire without affecting the recording operation.
TO RECORD FROM THE BUILT-IN AM/FM RADIO
1. Follow the instructions TO PLAY THE RADIO (see page 6).
2. Make sure the FUNCTION switch is in the RADIO position, and POWER switch is ON (in
depressed position).
3. Load the blank cassette tape with full reel on the left side.
4. Locate the portion of the tape where you desire to start recording by using the
Rewind feature (or Fast Forward) or start at the beginning of the tape.
5. Tune into the station you want to record, press the CASSETTE RECORD button
and CASSETTE PLAY button simultaneously. Both buttons should remain in their
depressed positions when released. If the RECORD button cannot go down, see
page 15. Do not force this button down. Or if button does not stay down, your
tape may have reached the end of the tape, reverse it so that full reel is on the
left side.
6. You are now recording from the Built-in Radio and the recording process will
automatically stop at the end of the tape.
7. To stop the recording manually, press the CASSETTE STOP/EJECT button.
8. Slide the FUNCTION switch to TAPE to turn off the radio. Press the POWER switch to
shut off the power, and the POWER/BATT. lamp will go off.
NOTE: When you want to play the cassette tape after recording, slide the FUNCTION
switch to TAPE position, press the CASSETTE REWIND button, and then press
the CASSETTE PLAY button. Adjust the VOLUME CONTROL and BASS BOOST switch
to your taste.
TO RECORD FROM THE BUILT-IN MICROPHONE
1. Load a blank cassette tape (full reel on left side).
2. Make sure the FUNCTION switch is in the TAPE position, and the POWER switch in
ON position.
3. Press the CASSETTE RECORD button and CASSETTE PLAY button at the same time.
Both buttons should remain in their down positions when released. If the RECORD
button cannot go down, see page 15. Do not force this button down. Or if it
does not stay down, your tape may have reached the end of the tape, reverse it so
that full reel is on the left side.
4. When you talk in front of the set, your voice will be recorded. You are now
recording using the BUILT-IN CONDENSER MICROPHONE and the recording process
will automatically stop at the end of the tape.
5. To stop the recording manually, press the CASSETTE STOP/EJECT button.
6. To hear what you recorded, press the CASSETTE REWIND button and
CASSETTE PLAY button.
7. To shut off the set, press the CASSETTE STOP/EJECT button and the POWER switch.
The POWER/BATT. lamp will go off.
13
IB-CD1492(AD)-WM-E-031402
TO RECORD FROM COMPACT DISC
1. Load the cassette tape into the Cassette Compartment (full reel on the left side).
2. Load the CD and close the CD door.
3. Set the FUNCTION switch to the CD position and press the POWER switch to ON
(depressed position), the POWER/BATT. lamp will light.
4. Press the CASSETTE PAUSE button.
5. Press the CASSETTE RECORD and PLAY buttons for record standby.
NOTE: When pressing the CASSETTE RECORD button, the CASSETTE PLAY button
will automatically go down (If the buttons do not go down, reverse the
tape or check record lever interlock on Page 15).
6. Start the CD playing by pressing the CD PLAY/PAUSE button.
7. Press (and release) the CASSETTE PAUSE button when you wish to start recording.
8. You are now recording the CD music onto your cassette tape.
9. Press the CASSETTE STOP/EJECT button to stop recording.
10. The recording will stop when the tape has reached the end and the CASSETTE
RECORD and PLAY buttons will pop up.
11. To hear what you recorded, slide the FUNCTION switch to the TAPE position,
press REWIND and PLAY buttons.
12. To shut off the set, press the CASSETTE STOP/EJECT button, and then press the
POWER switch (pop-up position), the POWER/BATT. lamp will go off.
TO ERASE A TAPE
Simply record any new song, the old song will be erased automatically.
NOTE: If you cannot press the CASSETTE RECORD button down, see record lever
Interlock information on Page 15, or your tape may have reached the end.
Remove the tape and flip it over to the other side or press REWIND button.
CAUTION:
The automatic stop mechanism may not operate during playback of tape
when the set is using batteries and the batteries are weak.
•
Disconnect the AC power cord plug from the AC outlet if the set is not going to
be used for a long period of time (2 weeks or more). Also remove the batteries.
•
Do not leave any tape buttons down when the set is not in use, or else the
pinch roller could be damaged.
•
Remember when inserting tapes, the full reel must be on the left side.
If the CASSETTE PLAY button pops up, your tape has reached the end, reverse the
tape or press the REWIND button.
•
•
14
IB-CD1492(AD)-WM-E-031402
RECORD LEVER INTERLOCK
PROTECTING CASSETTE TAPE AGAINST ERASURE
All cassette tapes are provided with tabs which, when in place, allow tape erasure
to be performed. If the tabs are removed then the tape CANNOT be erased or recorded
on and the CASSETTE RECORD button cannot be pressed.
To protect the A (or 1) side for cassette tape, break off the A side tab with a
screwdriver.
Break the small tab to
prevent erasing or
recording
SCREWDRIVER
Follow same procedure for B (or 2) side.
NOTE: Music tapes you buy from a store have these tabs removed to prevent
accidental erasure.
The tape can be re-recorded or erased, if required, by covering the tab holes
with plastic tape.
PLASTIC TAPE
NOTE: If the RECORD button will not go down, the tabs above are
probably missing - Also check if the tape has reached the end.
15
IB-CD1492(AD)-WM-E-031402
CLEANING THE TAPE HEADS
We suggest using a special cleaning tape cassette (not included) (available in most
music and Hi-Fi stores). But if you do not have one, you may follow the instructions
below.
COTTON SWAB
CAPSTAN
PINCH ROLLER
ERASE HEAD
RECORD/PLAYBACK HEAD
When the heads, capstan and pinch roller become dirty, this may result in muffled,
distorted or reduced sound during playback and may even result in tape jams.
Remove the cassette tape and clean with a cotton swab moistened with
commercially sold head/pinch roller cleaner or alcohol. Wait approximately 10
seconds for the alcohol or cleaning fluid to dry before using.
HOW TO GET THE BEST OUT OF YOUR SET
AM RECEPTION - You may find that you can improve the reception of your favorite
station by rotating the set a small amount.
FM RECEPTION - You may find that you can improve the reception of your favorite
station by collapsing the telescoping antenna a small amount, rotating or extending it to
the full length.
RECORD BUTTON - If you find that you cannot press this button down, check the
Record Interlock defeat tabs on the cassette (see page 15), or the tape may be
at the end, rewind the tape or reverse it.
TAPE HEADS - The tape heads should be cleaned periodically with a special
cleaning tape (available in music and Hi-Fi stores) to remove the particles of brown
oxide coating from the tapes that collected on these heads. These particles fill the gap
in the heads and degrade performance.
16
IB-CD1492(AD)-WM-E-031402
TROUBLE SHOOTING CHECK LIST & HELPFUL HINTS
SHOULD YOUR SET HAVE A PROBLEM, CHECK THE FOLLOWING:
PROBLEM
CHECK THE FOLLOWING
Does the AC outlet being used actually
have AC power? Is the power cord
plugged into the back of the set? Is
POWER/BATT. lamp ON?
Set does not work on AC
Are the batteries fresh and properly
installed? Is power cord connected?
Remove power cord from both AC
Socket and outlet. Is the POWER/BATT.
lamp ON?
Set does not work on batteries
The batteries are weak or not installed
correctly. Replace batteries and/or
check the polarity.
Sound is distorted, the POWER/BATT.
lamp is dim
Are the speakers plugged in? Check
the back of the set and see page 5.
Is the VOLUME CONTROL at MIN? Is
headphone in jack? Is play off? Are
batteries fresh?
No sound
Rotate the unit to improve AM reception.
For FM reception, extend and adjust the
FM Telescoping Antenna. FM Stereo is
weaker than FM, slide the switch to FM
if station is weak.
AM, FM, FM Stereo reception weak
Clean the tape heads using
a
special cleaning tape cassette (not
included) (available at most music
and Hi-Fi stores). If you do not have a
cleaning tape, please see page 16.
Poor quality recording or playback
of cassette tapes
Does the cassette tape you are using
still have its tabs on the rear surface?
See details on Record Lever Interlock
on page 15.
The CASSETTE RECORD button will
not stay down
The tape has ended. Remove tape, flip
it over to the other side and then reinsert
and press Play, or rewind it.
The CASSETTE PLAY button or
CASSETTE RECORD button will not
stay down
NORMAL BATTERY LIFE USING ALKALINE BATTERIES IS ABOUT 8
HOURS OF CASSETTE PLAYING TIME.
17
IB-CD1492(AD)-WM-E-031402
CD TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE AND REMEDY
Is AC power cord plugged into outlet? Does outlet
have power? Check outlet with a lamp or other
appliance.
Make sure the FUNCTION switch is in CD position.
If using the set on batteries - make sure you
unplug the AC cord from the back of the set and
outlet.
CD does not rotate
- Also check if batteries are fresh.
(The AC SOCKET in the back of the set has a
switch which shuts off battery power if cord is plugged
into the back of the set).
If the Display shows “
”. This means the CD disc
is upside down. Open the door, remove the CD, flip it
over and insert correctly. The printed side up.
1. Is the lens very dirty? (Gently clean lens with a
soft cloth or CD cleaner disc available at most
Hi-Fi stores.)
CD does not play
2. Is POWER/BATT. lamp ON?
3. Is the FUNCTION switch in CD position?
4. Is the track number flashing? (press PLAY button) The
track number will flash in pause and be steady
on during play.
Disc has a defect. Try cleaning the disc with a
clean rag or disc cleaner. If this does not help,
the disc may be damaged.
Disc skips parts of
songs
Is the lens very dirty? Gently clean the lens.
1. Are the speakers plugged in? Check the back of
the set and see page 5.
2. Is VOLUME CONTROL at MIN? Adjust the
VOLUME CONTROL.
Speakers have no
sound
3. Is headphone in jack? Remove headphones to
power speakers.
4. Make sure AC cord is plugged in or unplugged
from back of set if using batteries.
5. Make sure batteries are fresh.
NOTE: The CD player and the cassette decks are fitted with self-lubricating
bearings which must not be oiled or greased.
TO CLEAN THE CD PLAYER
A chamois soft cloth very slightly moistened with water is sufficient for cleaning the
housing of the set and the enclosures.
NOTE: Your CD player may not play when bringing it from a cold place (outdoors)
to a warm place (indoors). Because of large temperature differences,
condensation may have formed on the lens of the laser. This will disappear
after some time (when the mechanism warms up).
18
IB-CD1492(AD)-WM-E-031402
SPECIFICATIONS
GENERAL DESCRIPTION
Power source:
AC 120V, 60Hz, 15 Watts
DC 12V (8 size “D” batteries)
(we recommend alkaline batteries for longer life)
4" 4 ohm
Speakers:
Output Power: 3 Watts / channel
MAIN SET
SPEAKER
Dimensions:
1
3
1
Width : 8 / ”
6
7
/ ”
/ ”
4
4
8
”
8
7
9
Depth : 6 / ”
Height :
9
”
Weight : 5.8 lbs (without batteries) 2.27 lbs
TAPE RECORDER SECTION
Tape:
Standard normal bias cassette tape
Frequency response: 70 Hz - 10 kHz
RADIO SECTION
Frequency range:
FM: 88 - 108 MHz
AM: 530 - 1700 kHz
CD SECTION
Plays disc type:
Any normal music CD
760 - 800 NM
Laser wave length:
Tracking method:
3 - spot error detection
50 Hz - 15 kHz +1/-2 dB
3.86mm lens
Frequence response:
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
LENOXX reserves the right to make design and specification changes for product
improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER
THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
For customer service
Dial 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
© 2002 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
19
IB-CD1492(AD)-WM-E-031402
|