La Crosse Technology Weather Radio K84322 User Manual

WIRELESS TEMPERATURE STATION  
Model K84322 | Instruction Manual  
La Crosse Technology’s Wireless Temperature Station provides you with precise, real-time weather data  
straight from your backyard. Monitor indoor and outdoor temperature, track temperature trends and set  
customizable temperature alerts easily—all on one convenient device. The Temperature Station features  
a wireless transmission range of over 200 feet (60 meters) in open air from the transmitter to the  
Temperature Station.  
Wireless Temperature Station  
Outdoor Temperature Transmitter TX141-A  
La Crosse Technology  
Page 1  
 
   
Features  
Calendar (Month/date, 2000-2099 Default Year 2012)  
Time (hour/minute)  
Indoor Temperature  
Indoor Temperature Trend  
Wireless Outdoor Temperature  
Outdoor Temperature Trend  
°F/°C selectable  
Alarm and Snooze Function  
Large 2 inch Outdoor Temperature numbers  
Low Battery indicator for Outdoor Sensor and Station  
MIN/MAX Daily Records with auto reset (0:00)  
High/Low Temperature Alert for Outdoor Temperature  
High/Low/Off Backlight option  
Sensor Signal Strength  
Sits on desktop or tabletop  
Setup Instructions Step-by-Step  
STEP 1:  
Slide the battery cover tab down and pull out to remove the battery cover.  
Insert two new AA batteries (not included) into the back of the Temperature Station. Observe the  
correct polarity (see marking inside the battery compartment).  
The Temperature Station will light up and show, indoor temperature.  
Do Not Mix Old and New Batteries  
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries  
STEP 2:  
Ensure that the transmitter is within 10 feet of the Temperature Station.  
Remove battery cover from TX141-A transmitter. Slide the battery cover down and lift off the front of  
the transmitter.  
Insert two new AA batteries into the transmitter. Observe the correct polarity.  
Within three minutes the Temperature Station will show readings in the outdoor temperature area on  
the LCD.  
Note: Allow the Temperature Station and the transmitter to stay within 10 feet of each other for the first  
15 minutes of set up.  
Troubleshooting  
After the batteries are inserted, the Temperature Station will search for the outdoor temperature  
transmitter for 3 minutes.  
The antenna symbol  
No antenna symbol will show during RF (radio frequency) synchronization.  
If synchronization fails once, the antenna will lose one bar.  
will flash during reception, and temperature display will be dashes “---“.  
If synchronization fails twice, the antenna will lose two bars.  
If RF (radio frequency) reception fails five times, the antenna symbol will show:  
The antenna will show full display with successful RF (radio frequency) reception.  
Search for Transmitter  
If the outdoor temperature is not displayed after three minutes, hold the SENSOR SEARCH button on  
the temperature station for three seconds to search for outdoor transmitter.  
Next remove the battery cover from the TX141-A transmitter then press the  
TX button to send a signal.  
If it still does not receive the outdoor temperature, remove the batteries from  
both the temperature station and the transmitter for 15 minutes repeat setup  
instructions from step 1.  
The maximum transmitting range in open air is over 200 feet (60 meters). Obstacles such as walls,  
windows, stucco, concrete and large metal objects can reduce the range.  
La Crosse Technology  
Page 3  
 
       
Function Buttons  
Front  
Back  
Program Menu  
The program menu allows you to select your preferences:  
Year  
Month  
Date  
12/24-Hour Time Format  
Hour  
Minutes  
Fahrenheit/Celsius  
The SETTINGS button moves  
through the program menu,  
and confirm selections.  
The MAX button will  
increase a value  
The MIN button will  
decrease a value  
Set Calendar  
To set the calendar:  
1. Hold the SETTINGS button until the station beeps.  
2. The Year will flash.  
3. Use the MAX or MIN buttons to choose the year.  
4. Press the SETTINGS button to confirm and move to the month.  
5. The Month will flash.  
6. Use the MAX or MIN buttons to choose the month.  
7. Press the SETTINGS button to confirm and move to the date.  
8. The Date will flash.  
9. Use the MAX or MIN buttons to choose the date.  
10. Press the SETTINGS button to confirm and move to Fahrenheit/Celsius.  
Note: The day of the week will set automatically once the year, month and date  
are set.  
12-hour or 24-hour Time Format  
The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.  
Note: When in 12-hour format AM or PM will show in front of the hour.  
1. Hold the SETTINGS button for three seconds to enter time set mode.  
2. 12H will flash.  
3. Use the MAX or MIN buttons to choose 12-hour or 24-hour time format.  
4. Press the SETTINGS button to confirm and move to hour.  
12H  
Set Time  
To set the time manually:  
1. The Hour digit will flash.  
2. Use the MAX or MIN buttons to choose the hour.  
3. Press the SETTINGS button to confirm and move to minutes.  
4. The Minutes will flash.  
La Crosse Technology  
Page 4  
 
         
5. Use the MAX or MIN buttons to choose the minutes.  
6. Press the SETTINGS button to confirm and move to the year.  
Fahrenheit/Celsius  
1. °F or °C will flash.  
2. Use the MAX or MIN buttons to select Fahrenheit or Celsius.  
3. Press and release the SETTINGS button to confirm and exit the program  
menu.  
Note: When no buttons are pressed for ten seconds, the Temperature  
Station will save the last change and default back to normal mode.  
Alarm Time  
The TIME ALARM button  
moves through the alarm set mode,  
and confirm selections.  
The MAX button will  
increase a value  
The MIN button will  
decrease a value  
Set Time Alarm  
In normal mode, press and release the TIME ALARM button once to show alarm time. Hold the TIME  
ALARM button for three seconds to enter alarm set mode.  
1. The Hour will flash.  
2. Use the MAX or MIN buttons to set the hour.  
3. Press the TIME ALARM button to confirm and switch to minutes.  
4. The Minutes will flash.  
5. Use the MAX or MIN buttons to set the minutes.  
6. Press TIME ALARM button to confirm and exit.  
Note: When no buttons are pressed for ten seconds, the Temperature Station will save the last change  
and default back to normal mode.  
Activate/Deactivate Time Alarm  
In normal mode, press and release the TIME ALARM button once to show alarm time.  
Press and release the TIME ALARM button repeatedly to turn ON/OFF alarm.  
The alarm icon appears when alarm is activated.  
Note: The crescendo alarm will ring for 2 minutes then turn off if no buttons are pressed.  
Snooze  
When the alarm sounds press the TIME ALARM button to snooze the alarm for 10  
minutes.  
The snooze option can be repeated three times.  
The alarm icon will flash while the snooze feature is active.  
Note: While the alarm sounds, press any button except the TIME ALARM button to turn the alarm off.  
MIN/MAX Temperatures  
The Temperature Station will show the daily minimum and maximum temperatures each day starting at  
midnight (12:00 AM). The Temperature Station automatically resets the MIN/MAX temperatures  
at midnight (12:00 AM).  
View MIN data: Press and release the MIN button to view the minimum Indoor and Outdoor  
Temperatures. After ten seconds the LCD will return to the current temperatures.  
Reset MIN data: Hold the MIN button for 3 seconds and the Indoor and all Outdoor Minimum  
La Crosse Technology  
Page 5  
 
           
Temperatures will be reset to current temperatures.  
View MAX data: Press and release the MAX button to view the maximum Indoor and Outdoor  
Temperatures. After ten seconds the LCD will return to the current temperatures.  
Reset MAX data: Hold the MAX button for 3 seconds and the Indoor and all Outdoor  
Maximum Temperatures will be reset to current temperatures.  
Note: When no buttons are pressed for ten seconds, the temperature station will return to  
display the current temperature.  
Low Battery Icon  
When the low battery icon  
weather station.  
appears in the indoor (IN) reading section, replace the batteries in the  
When the low battery icon appears in the outdoor (OUT) readings section, replace the batteries in  
the outdoor transmitter.  
Temperature Alerts  
Alert values are set when they flash in the outdoor temperature area. Temperature alerts are turned on or  
off in the Temperature Alert box.  
One or all the temperature alerts may be set.  
Range for outdoor temperature alert:  
-40°F to 140°F (-40°C to 60°C)  
Select Temperature Alert Values  
Hold the TEMP ALERTS button for three seconds, until the temperature station  
beeps, to enter alert setting.  
OUTDOOR HI alert will flash where the outdoor temperature shows. Press the MAX or MIN  
buttons to set the alert value, and press the TEMP ALERTS button to confirm. Then press the  
TEMP ALERTS button again switch to OUTDOOR LOW setting.  
OUTDOOR LO alert will flash where the outdoor temperature shows. Press the MAX or MIN  
buttons to set the alert value, and press the TEMP ALERTS button to confirm and exit.  
Note: After selecting temperature alert values, use the next step to turn individual alerts ON or  
OFF.  
Temperature Alerts ON/OFF  
From normal time and temperature display mode, press and release the TEMP  
ALERTS button to toggle between:  
o Outdoor HI  
o Outdoor LO  
Press the MAX button (Alert ON) to turn the selected alert ON.  
The alert icon  
appears when alarm is activated.  
Press the MIN button (Alert OFF) to turn the selected alert OFF.  
Note: When no temperature alerts are set the Temperature Alert area will show OFF.  
Temperature Alert Sounds  
When temperature alert is ringing, corresponding alert icon will flash.  
The alert will ring for five seconds every minute, until the temperature is out of alert range.  
Press any button to stop alert. The alert icon will still show.  
Turn Alert OFF: In normal mode, press and release the TEMP ALERTS button to select the alert to  
turn off. With HI or LO alert selected, press the MIN button to turn that alert OFF.  
La Crosse Technology  
Page 6  
 
         
Temperature Trend Arrows  
The indoor and outdoor temperature trend arrows will update every 30 minutes or less. These  
trends represent temperature changes over the past three hours.  
UP: Temperature rose more than 2°F/1°C in the past three hours  
RIGHT: Temperature has not changed more than 2°F/1°C in the past three hours  
DOWN: Temperature fell more than 2°F/1°C in the past three hours  
Outdoor Temperature Flashing  
Low battery icon present in the outdoor temperature area:  
1. Change batteries in the transmitter, and press the TX button.  
2. Hold the SENSOR SEARCH button for 3 seconds and the Temperature  
Station will search for the outdoor transmitter again.  
End of Transmission Range:  
1. Move the transmitter closer to the Temperature Station.  
2. Avoid obstructions in the signal path.  
3. Keep transmitter and Temperature Station away from electronics.  
Install Batteries in the Temperature Station  
1. Slide tab down and pull out to remove battery cover.  
2. Install two new AA batteries according to the polarity markings.  
Do Not Mix Old and New Batteries  
Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries  
If the Temperature Station does not display indoor temperature after 60  
seconds, remove adapter and batteries and wait for at least 60 seconds  
before repeating the setup process.  
Install Batteries in the Outdoor Transmitter  
1. Slide the battery cover down, then lift off the front of the transmitter.  
2. Insert two new AA batteries into the transmitter. Observe the correct polarity (see marking  
inside battery compartment).  
3. Keep transmitter 5-10 ft. from the Temperature Station during setup.  
4. After 15 minutes, if the outdoor temperature shows on the Temperature Station, you can  
move the outdoor transmitter outside to a shaded location within range of the Temperature  
Station.  
Care and Maintenance  
Do Not Mix Old and New Batteries  
Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries  
Do not expose the Temperature Station to extreme temperatures, vibration or shock. Keep dry.  
Clean Temperature Station with a soft damp cloth. Do not use solvents or scouring agents.  
The Temperature Station is not a toy. Keep it out of reach of children.  
The Temperature Station is not to be used for medical purpose or for public information. It is for home  
use only.  
The specifications of this Temperature Station may change without prior notice.  
Improper use or unauthorized opening of housing will void the warranty.  
If the Temperature Station does not work properly, change the batteries.  
Position the Temperature Station  
Choose a location for the Temperature Station that is within range of the outdoor transmitter. The  
Temperature Station has a built in base stand to sit on a table or desk.  
La Crosse Technology  
Page 7  
 
           
Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,  
televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception.  
Be aware of electrical wires and plumbing within a wall.  
Best reception is achieved when the front or the back of the Temperature Station is facing the  
outdoor transmitter. This allows a larger portion of the antenna to receive a signal.  
Position the Outdoor Transmitter  
Once the Temperature Station shows the outdoor temperature, place it and the transmitter in the desired  
locations and wait approximately 1 hour before permanently mounting the transmitter to ensure that there  
is proper reception. The transmitter should be mounted vertically, in a shaded, protected area, at least 6  
feet from the ground to avoid damage and ensure accurate readings. The transmitter is water resistant,  
not waterproof and should not be placed anywhere it will become submerged in water or subject to  
standing water or snow. Choose a location for the transmitter that is within range of the Temperature  
Station and under an overhang for accuracy.  
Option 1:  
Install one mounting screw (included) into a wall leaving approximately ½ of an inch  
(12.7mm) extended.  
Place the transmitter onto the screw using the hanging hole on the backside.  
Gently pull the transmitter down to lock the screw into place.  
Option 2:  
Insert the mounting screw through the front of the transmitter and into the wall.  
Tighten the screw to snug (do not over tighten).  
To achieve a true temperature reading, mount where direct sunlight cannot reach the outdoor transmitter.  
Mount the outdoor transmitter on a North-facing wall or in any well shaded area. Under an eave or deck  
rail work well. The maximum transmitting range in open air is over 200 feet (60 meters). Obstacles such  
as walls, windows, stucco, concrete, and large metal objects can reduce the range. Place the transmitter  
at least 6 feet in the air to improve signal transmission.  
Specifications  
Indoor  
Temperature Range:  
Interval:  
+32°F to +122°F (0°C to 50°C)  
About every 30 seconds  
Outdoor  
Temperature Range:  
Distance:  
Interval:  
-40°F to 140°F (-40°C to 60°C)  
Over 200 feet (60 meters) RF 433MHz (open air)  
About every 50 seconds  
Power  
Temperature Station:  
TX141-A Transmitter:  
2-AA, IEC, LR6 batteries (not included)  
2-AA, IEC, LR6 batteries (not included)  
Battery Life  
TX141-A Transmitter  
Battery Life:  
Battery life is over 24 months when using reputable battery brands.  
Battery life is over 24 months when using reputable battery brands.  
Temperature Station  
Battery Life:  
La Crosse Technology  
Page 8  
 
   
Dimensions  
Temperature Station:  
TX141-A Transmitter:  
Warranty Information  
4.27”L x 1.48”W x 3.88”H (108 x 38 x 99 mm)  
1.57" L x 0.79" W x 5.12" H (40 x 20 x 130 mm)  
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing  
defects in materials and workmanship.  
This limited warranty begins on the original date of purchase, is valid only on products purchased and  
used in North America and only to the original purchaser of this product. To receive warranty service, the  
purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures.  
Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The  
original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology,  
Ltd or La Crosse Technology, Ltd’s authorized service center.  
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated  
herein, with new or reconditioned parts or products if found to be defective during the limited warranty  
period specified above. All replaced parts and products become the property of La Crosse Technology,  
Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay  
all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not  
covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for  
the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse  
Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse  
Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address  
only.  
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the  
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including  
the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must  
be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4)  
damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage  
resulting from the performance of repairs or alterations by someone other than an authorized La Crosse  
Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and  
uses that this product was not intended or (8) the products inability to receive a signal due to any source  
of interference.. This warranty covers only actual defects within the product itself, and does not cover the  
cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on  
misrepresentation by the seller or performance variations resulting from installation-related  
circumstances.  
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,  
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE  
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR  
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT  
OF CHILDREN’S REACH.  
This warranty gives you specific legal rights. You may also have other rights specific to your State.  
Some States do no allow the exclusion of consequential or incidental damages therefore the above  
exclusion of limitation may not apply to you.  
For warranty work, technical support, or information contact:  
La Crosse Technology, Ltd  
2809 Losey Blvd. S.  
La Crosse, WI 54601  
Product Registration:  
Contact Support: 1-608-782-1610  
La Crosse Technology  
Page 9  
 
 
Online information at:  
Protected under U.S. Patents:  
5,978,738  
6,076,044  
6,597,990  
FCC Statement  
RF Exposure mobile:  
The internal / external antennas used for this mobile transmitter must provide a separation distance of at  
least 20 cm (8 inches) from all persons and must not be co-located or operating in conjunction with any  
other antenna or transmitter."  
Statement according to FCC part 15.19:  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Statement according to FCC part 15.21:  
Modifications not expressly approved by this company could void the user's authority to operate the  
equipment.  
Statement according to FCC part 15.105:  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV technician for help  
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or  
processed using electronic, mechanical or chemical procedures without written permission of the  
publisher.  
This handbook may contain mistakes and printing errors. The information in this handbook is regularly  
checked and corrections made in the next issue. We accept no liability for technical mistakes or printing  
errors, or their consequences.  
All trademarks and patents are acknowledged.  
Printed in China  
La Crosse Technology  
Page 10  
 
 

Leica Microscope Magnifier M125 B User Manual
Liebert Surge Protector Power Strips User Manual
Lucent Technologies Speaker 585 210 940 User Manual
Master Lock Air Conditioner BR150CE User Manual
Maytag Dryer Accessories SL 3 User Manual
Melissa Fan 271 011 User Manual
Melissa Vacuum Cleaner 740 106 User Manual
Metro DataVac Vacuum Cleaner PRO 1AG User Manual
Metrologic Instruments Barcode Reader MLPN 2178 User Manual
Micron Technology Fan Turbofan User Manual