La Crosse Technology Clock 616 146v2 User Manual

Model: 616-146v2  
Quick Setup Guide  
DC: 071015  
Atomic Projection Alarm  
with Indoor and Outdoor Temperature  
Snooze/Backlight  
BUTTONS  
Time, Alarm  
with Snooze,  
& Calendar  
Projection  
Arm  
Rotates 180°  
Indoor/Outdoor  
Temperature +  
Trends  
TX141v2  
Outdoor  
Sensor  
2 “AA”  
Batteries  
USB Charge  
Port, 1 Amp  
5 Volt  
Adapter  
2 “AAA”  
Batteries  
Model: 616-146v2  
Page | 1  
 
SET TIME ALARM  
1. Hold the ALARM button to enter alarm time set mode.  
2. Use the +/TEMP or -/TIME buttons to adjust values.  
3. Press the ALARM button to confirm adjustments and move to the  
next item.  
Alarm Time setting order:  
1. Hours  
2. Minutes  
ACTIVATE/DEACTIVATE TIME ALARM  
Press the ALARM button once to view alarm time.  
Press the ALARM button again to activate the alarm.  
Bell icon appears.  
Press the ALARM button again to deactivate the alarm.  
The bell icon disappears.  
Alarm  
Bell Icon  
SNOOZE (Silences alarm temporarily)  
Press the SNOOZE/LIGHT button to silence alarm for 9 minutes.  
Zz will show.  
When in snooze mode, press ALARM to stop alarm for one day.  
Note: The alarm is crescendo sound. The alarm will sound for 2  
minutes and then shut off completely.  
BACKLIGHT AND PROJECTION INTENSITY  
Press and release the SNOOZE/LIGHT button to adjust the  
brightness of the backlight and projection image (together):  
High  
Low  
OFF  
Note: When the Adapter is NOT in use, the High/Low/On/Off features  
are not available.  
PROJECTION (On/Off, rotate, projection mode)  
Battery Power: Press and release the SNOOZE/LIGHT button to  
show the projection for 10 seconds.  
A/C Power: Projection is displayed constantly unless turned off.  
Note: Projection will not display constantly when operating on battery  
power.  
Model: 616-146v2  
Page | 3  
 
Rotate Projection:  
Press the PROJECTION button to rotate the projection image 90  
degrees.  
Press the PROJECTION button again to rotate another 90  
degrees.  
Change Projection Modes: Hold, then release the PROJECTION  
button to switch projection modes. Watch the projection image to view  
the changes.  
Time and Outdoor Temperature: alternate every 5 seconds  
(default)  
Time only  
Outdoor Temperature only  
USB CHARGE PORT  
Charge a smart phone, camera or other devices when the forecast  
station is plugged into a power outlet with the included 5V AC  
adapter.  
Note: This is a power-output charging port. It does not supply power  
to the projection clock.  
Connect your external device’s USB charging cable (not included)  
to the USB charging port.  
Charging times will vary.  
USB Power Output: 1A maximum current. Charge 1A devices or  
devices that are self-regulating.  
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH  
Press the -/TIME button to start or stop a manual signal  
search. WWVB Icon will flash  
For information about WWVB visit:  
WWVB  
Icon  
LOW BATTERY ICON  
If the icon is displayed in Outdoor Temperature section,  
replace batteries in the outdoor sensor.  
If the icon is displayed in Indoor Temperature section,  
replace batteries in the projection clock.  
Low  
Battery  
Icon  
Model: 616-146v2  
Page | 4  
 
TEMPERATURE TREND INDICATORS  
The temperature (2°F/1°C) trend indicators update every 30 minutes  
or less.  
Temperature has risen in the past 3 hours.  
Temperature has not changed in the past 3 hours.  
Temperature has fallen in the past 3 hours.  
SEARCH FOR OUTDOOR SENSOR  
Hold the +/TEMP button for 3 seconds to search for the  
outdoor sensor .  
CARE AND MAINTENANCE  
Do not mix old and new batteries  
Do not mix Alkaline, Standard, Lithium or Rechargeable  
Batteries  
Always purchase the correct size and grade of battery most  
suitable for the intended use.  
Replace all batteries of a set at the same time.  
Clean the battery contacts and also those of the device prior to  
battery installation.  
Ensure the batteries are installed correctly with regard to polarity  
(+and -).  
Remove batteries from equipment with is not to be used for an  
extended period of time.  
Remove expired batteries promptly.  
POSITION OUTDOOR SENSOR  
Mount the outdoor sensor on a North-facing wall or in any well  
shaded area. Under an eave or deck rail is preferred.  
The maximum transmitting range to the atomic projection alarm is  
over 300-feet (91 meters) in open air, not including walls.  
POSITION PROJECTION ALARM  
The projection alarm has a wide base to sit on a desk or table.  
Choose a location 6 feet or more from electronics such as  
cordless phones, wireless gaming systems, televisions,  
Model: 616-146v2  
Page | 5  
 
microwaves, routers, baby monitors, etc., which can prevent  
signal reception.  
Position near an exterior wall that faces Ft. Collins Colorado for  
WWVB time signal reception.  
Place within 300 ft. (91 meters) of the outdoor sensor.  
Obstacles such as walls, windows, stucco, concrete and large  
metal objects can reduce the range.  
Be aware of electrical wires and plumbing within a wall. This will  
interfere with RF (radio frequency) signal reception.  
RESTART  
If the outdoor temperature displays dashes:  
Remove the AC adapter and remove batteries from the projection  
alarm &sensor.  
Press a button 20 times.  
After 15 minutes, return to Step 1 above.  
WARRANTY AND SUPPORT  
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date  
of purchase) on this product relating to manufacturing defects in materials &  
workmanship.  
View full warranty details online at:  
Before returning a product, please contact our friendly customer  
support with questions or visit our online help:  
La Crosse Technology, Ltd  
2830 South 26th St  
La Crosse, WI 54601  
Contact Support:  
1-608-782-1610  
Online Product Support:  
Protected under U.S. Patents: 5,978,738 | 6,076,044 |RE43903  
Model: 616-146v2  
Page | 6  
 
SPECIFICATIONS  
+32°F to +122°F (0°C to 50°C)  
Indoor:  
Temperature Range:  
Interval:  
About every 30 seconds  
Outdoor:  
Temperature Range:  
Alkaline Batteries:  
Lithium Batteries:  
-40°F to 140°F (-40°C to 60°C)  
-20°F to 140°F (-28.8°C to 60°C)  
-40°F to 140°F (-40°C to 60°C)  
Temperatures below - 20°F  
(-28.8°C) require Lithium batteries in the  
outdoor sensor.  
NOTE:  
Over 300 ft. (91 meters)  
RF 433MHz (open air)  
Distance:  
Interval:  
About every 30 seconds  
USB Charging Port  
USB Output:  
1 Amp maximum current  
Power:  
Projection Alarm  
Primary Power:  
AC: HX-0501500U  
5-volt AC power adapter (included)  
Optional 2-AAA, IEC, LR3 batteries  
(not included)  
Optional/Battery Backup  
2-AA, IEC, LR6 batteries  
(not included)  
TX141v2 Sensor :  
Battery Life:  
Projection Alarm  
Battery Backup:  
Battery life is over 24 months when using  
the AC adapter for primary power  
Battery life is over 24 months when using  
reputable battery brands for both Alkaline  
and Lithium batteries  
TX141v2 Sensor :  
Dimensions:  
5.23” L x 1.96” W x 4.33” H  
(133 x 50 x 110 mm)  
Projection Alarm:  
1.57" x 0.79" x 5.12"  
(40 x 20 x 130mm)  
TX141v2 Sensor :  
Model: 616-146v2  
Page | 7  
 
FCC STATEMENT  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device must not be co-located or operating in conjunction with any other  
antenna or transmitter.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Caution!  
The manufacturer is not responsible for any radio or TV interference caused  
by unauthorized modifications to this equipment. Such modifications could  
void the user authority to operate the equipment.  
All rights reserved. This manual may not be reproduced in any form, even in  
part, or duplicated or processed using electronic, mechanical or chemical  
process without the written permission of the publisher.  
This booklet may contain errors or misprints. The information it contains is  
regularly checked and corrections are included in subsequent editions. We  
disclaim any responsibility for any technical error or printing error, or their  
consequences.  
All trademarks and patents are recognized.  
Model: 616-146v2  
Page | 8  
 

Land Pride Tiller HR15 User Manual
Leica Bouncy Seat VT100 A User Manual
LG Electronics Flat Panel Television 19 9L LG G30 User Manual
Logitek Standard Elec Cable Manufacturing Indoor Fireplace C A210 User Manual
Lowrance electronic Marine RADAR LINK 8VHF User Manual
Lux Products Thermostat DMH110 User Manual
Makita Air Compressor MAC3000 User Manual
Manitowoc Ice Ice Maker QC0700 User Manual
Meade Camcorder Accessories ETX User Manual
Memorex CRT Television MT2274 User Manual