• ADM loop technology with
System Sensor/200 protocol
• One input with line-monitoring for
wire breakage and short circuit
• Status LED
• Setting of module address via
decadic rotary switches
• Mounting in module box or by means
of mounting base
Description
The addressable Monitor Module M210E serves for the
line-monitored integration of contact detectors, such as
manual call points, sprinkler system contacts or super-
vising contacts, into the bidirectional communication
on the ADM loop with System Sensor/200 protocol.
A status LED indicates the condition of the monitor
module. Separate terminals enable the operation of
the module with or without the integrated dual-isolator.
Accessories for mounting on a wall, on a plate or on a
DIN rail are available.
Specifications
Operating voltage
Current consumption
Ambient temperature
Dimensions L × W × H
Colour
Supply through loop voltage
approx. 510µA (quiescent)
-20°C to +60°C
93 × 94 × 23 (mm)
cream
Weight
110g
Approval
VdS G202140
Order number
Order name
249100
Monitor Module 1xSurv.In/Anal./200/SS M210E
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
M210E_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|