OWNER’S MANUAL
Speaker Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
LSB316 (LSB316, SHS36-D)
P/NO : MFL66306880
HLS36W-NB_DUSALLK_ENG_6880.indd
1
2010-12-20 �� 9:30:57
Getting Started
3
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
IMPORTANT SAFETY
INSTRUCTIONS
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
1
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
HLS36W-NB_DUSALLK_ENG_6880.indd
3
2010-12-20 �� 9:30:57
4
Table of Contents
3
Operating
Table of Contents
15
Basic Operations
15 – USB Operation
15 Other Operations
15 – DOLBY DRC (Dynamic Range
Control)
15 – AV Sync
16 – Sleep Timer Setting
16 – Dimmer
16 – Turn off the sound temporarily
16 – Adjust the woofer level settings
16 – Displaying file and input source
1
Getting Started
2
6
6
6
6
7
7
7
7
8
9
9
Safety Information
Unique Features
– Portable In
– Speaker ez (easy) Setup
Accessories
Introduction
– Symbols Used in this Manual
Playable file
– MP3/ WMA music file requirement
Remote control
Front panel
Rear panel
17
17
Sound adjustment
– Setting the surround mode
18 Using Bluetooth technology
18 – Listening to music stored on the
Bluetooth devices
19 – Listening to sound through the
Bluetooth devices
2
Connecting
20 – Checking the information of
connected Bluetooth device
10 Mounting the main unit on a wall
12 Setting up
12 – Pairing wireless subwoofer
13 Optional Equipment Connection
13 – AUDIO (PORT. IN) In Connection
13 – Listening to music from your portable
player
21
Controlling a TV with the Supplied
Remote Control
21 – Setting up the remote to control your
TV
13 – OPTICAL In connection
13 – Speaker ez (easy) setup
14 – USB Playback
HLS36W-NB_DUSALLK_ENG_6880.indd
4
2010-12-20 �� 9:30:57
Table of Contents
5
4
Troubleshooting
22 Troubleshooting
1
5
Appendix
23 Maintenance
23 – Handling the Unit
24 Trademarks and Licenses
25 Specifications
2
3
4
5
6
6
Warranty
27 Warranty
HLS36W-NB_DUSALLK_ENG_6880.indd
5
2010-12-20 �� 9:30:57
6
Getting Started
Unique Features
Accessories
Please check and identify the supplied accessories.
Portable In
1
Listen to music from your portable device. (MP3,
Notebook, etc)
Speaker ez (easy) Setup
Listen to sounds from TV, DVD or Digital device
with vivid 2.1 or 2.0 ch mode.
Remote control (1)
Batteries (2)
Wall Mount Bracket
Installation Template
(1)
Wall bracket (1)
Optical cable (1)
HLS36W-NB_DUSALLK_ENG_6880.indd
6
2010-12-20 �� 9:30:57
Getting Started
7
Introduction
Playable file
Symbols Used in this Manual
MP3/ WMA music file
requirement
1
Note
,,
MP3/ WMA file compatibility with this unit is limited
as follows :
Indicates special notes and operating features.
Tip
,,
Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
y
Indicates tip and hints for making the task easier.
Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y
Caution
>,
Indicates cautions for preventing possible damages
from abuse.
Maximum files : Under 999
y
y
File extensions :“.mp3”/“.wma”
HLS36W-NB_DUSALLK_ENG_6880.indd
7
2010-12-20 �� 9:30:57
8
Getting Started
• • • • • • • • • • a • • • • • • • • •
1 POWER: Switches the unit ON or OFF.
AV SYNC: Synchronizes the audio and video.
DOLBY DRC: Sets the Dobly DRC.
Remote control
1
MUTE: Mutes the sound.
• • • • • • • • • • b • • • • • • • • •
FOLDER: Searches for a folder of MP3/ WMA files.
When a USB containing MP3/ WMA files in several
folders is being played, press FOLDER to select the
folder you want to play.
INPUT: Changes input sources.
OPTICAL: Changes input source to optical directly.
VOLUME: Adjusts speaker volume.
• • • • • • • • • • c • • • • • • • • •
SOUND EFFECT: Selects a sound effect mode.
WOOFER LEVEL: Sets the sound level of woofer.
REPEAT: Listens to your files repeatedly or
randomly.
C/V: Goes to next or previous file.
Z: Stops playback.
d/M: Starts playback. / Pauses playback.
SLEEP: Sets the system to turn off automatically at
a specified time.
INFO.: Displays the file or input source information.
• • • • • • • • • • d • • • • • • • • •
TV Control buttons: See page 21
BLUETOOTH: Pairing, connecting and
disconnecting your unit and Bluetooth device in
function other than the Bluetooth.
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two R03 (size AAA)
battery with and matched correctly.
0 to 9 numerical buttons: Selects numbered
numbered files. Enters the PIN code.
HLS36W-NB_DUSALLK_ENG_6880.indd
8
2010-12-20 �� 9:30:57
Getting Started
9
Front panel
B
D
A
1
G
F
E
C
A Display
D I STOP
B USB Port
C F FUNCTION
E T PLAY / PAUSE
F – VOL +
Press it repeatedly to select other function.
Adjusts speaker volume.
G 1 STANDBY/ON
Rear panel
A
B
A PORT. (Portable) IN
B OPTICAL IN 1/ 2
HLS36W-NB_DUSALLK_ENG_6880.indd
9
2010-12-20 �� 9:30:58
10 Connecting
2. When you mount it on a wall (concrete), use
the wall plugs (Not supplied). You should drill
some holes. A guide sheet (Wall Mount Bracket
Installation Template) is supplied to drill. Use the
sheet to check the point to drill.
Mounting the main
unit on a wall
You can mount the main unit on a wall.
Prepare screws and brackets.
Step 2
Preperation
2
Unit
Wall bracket
Wall Mount Bracket
Installation Template
Note
1. Match the TV’s BOTTOM EDGE of Wall Mount
Bracket Installation Template with the bottom
of TV and attach to the position.
,,
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting. Please
purchase it.
Step 1
TV
HLS36W-NB_DUSALLK_ENG_6880.indd 10
2010-12-20 �� 9:30:58
Connecting 11
3. Remove the Wall Mount Bracket Installation
Template.
5. Hang the main unit onto the bracket as shown
below.
4. Fix it with screws (not supplied) as shown in the
illustration below.
Step 5
Step 4
2
Note
,,
Note
,,
Detach the unit from the bracket as shown
below.
You can arrange power cord cable with the
bracket as shown below.
Power cord cable
Caution
Do not hang onto the installed unit and
avoid any impact to the unit.
>,
y
y
Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
y
HLS36W-NB_DUSALLK_ENG_6880.indd 11
2010-12-20 �� 9:30:58
12 Connecting
Manually pairing wireless subwoofer
Setting up
When your connection is not completed, you can
see the red LED on the woofer and woofer is not
made sound. To solve the problem, follow the
below steps.
Pairing wireless subwoofer
1. Press and hold I STOP button on the unit
and MUTE button on the remote control
simultaneously.
LED indicator of wireless subwoofer
LED Color
Status
- Displays the“REMATE”.
2
2. Press PAIRING on back of the woofer.
Blue
The wireless subwoofer is
receiving the signal of the unit.
- The blue LED will flicker
3. Turn off and on the unit.
Blue (blink)
Red
The wireless subwoofer is trying
to connect.
- If you see“blue”LED, it’s successful.
4. If you don’t see“blue”LED, try again Step 1 -
Step 3.
The Wireless subwoofer is in
standby mode.
Note
,,
Off (No
display)
The Wireless subwoofer is
turned off.
If you operate main unit then wireless
subwoofer (rear speakers) sound within a
few seconds in standby mode.
y
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
y
y
Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer
to communicate with each other.
y
HLS36W-NB_DUSALLK_ENG_6880.indd 12
2010-12-20 �� 9:30:58
Connecting 13
OPTICAL In connection
Connect an optical output of Unit (or Digital Device
etc) to the OPTICAL IN 1/ 2 connector.
Optional Equipment
Connection
OPTICAL IN Connection
AUDIO (PORT. IN) In
Connection
2
PORT.IN Connection
MP3 player, etc...
To the digital
optical output jack
of your component
Speaker ez (easy) setup
Listens to sound from TV or DVD or Digital Device
with 2.1 or 2ch mode.
Listening to music from your
portable player
1. Connect the unit’s OPTICAL IN 1/ 2 jack to jack
on optical out of your TV (or Digital Device etc.).
The unit can be used to play the music from many
types of portable player or external devices.
2. Select the OPTICAL 1/ 2 by using the OPTICAL.
1. Connect the portable player to the
AUDIO (PORT. IN) IN connector of the unit.
To select the OPTICAL 1/ 2 directly
3. Listen to sound with 2.1 or 2ch speaker.
2. Turn the power on by pressing 1 POWER.
4. Press OPTICAL to exit from OPTICAL 1/ 2.
3. Select the PORTABLE function by pressing
Function is retuned to previous one.
INPUT.
4. Turn on the portable player or external device
and start playing it.
HLS36W-NB_DUSALLK_ENG_6880.indd 13
2010-12-20 �� 9:30:58
14 Connecting
Compatible USB Devices
USB Playback
Insert USB memory device to the USB port on the
front of the unit.
MP3 Player : Flash type MP3 player.
y
USB Flash Drive : Devices that support USB2.0 or
USB1.1.
y
The USB function of this unit does not support
some USB devices.
y
USB Connection
USB device requirement
2
Devices which require additional program
installation connected to a computer, are not
supported.
y
Do not extract the USB device while in operation.
y
y
For a large capacity USB, it may take longer than
a few minutes to be searched.
To prevent data loss, back up all data.
y
y
If you use a USB extension cable or USB hub, the
USB device is not recognized.
Removing the USB Device from the unit.
Using NTFS file system is not supported. (Only
FAT(16/32) file system is supported.)
y
y
y
y
1. Choose a different function mode or press
I STOP twice in a row.
This unit is not supported when the total
number of files is 1 000 or more.
2. Remove the USB device from the unit.
External HDD, Card readers, Locked devices,
or hard type USB devices are not supported.
The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
HLS36W-NB_DUSALLK_ENG_6880.indd 14
2010-12-20 �� 9:30:58
Operating 15
Basic Operations
Other Operations
USB Operation
DOLBY DRC (Dynamic Range
Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DOLBY DRC.
1. Connect the USB device to the USB port.
2. Select the USB function by pressing INPUT.
3. Select a file you want to play by pressing
C or V.
To
Do this
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
Stop
Press Z
Playback
Pause
Press d/M
Press d/M
3
1. Press AV SYNC.
During playback, press C
or V to go to the next file
or to return to the beginning
of the current file.
2. Use C V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300m/sec.
Skipping to the
next/ previous
file
Press C twice briefly to
step back to the previous file.
Press REPEAT on the remote
control repeatedly, the display
change in the following order,
Playing
repeatedly or
randomly
p
p
RPT 1 RPT D (DIRECTORY)
p
p
RPT ALL RANDOM OFF.
Press 0 to 9 numerical
Selecting files buttons on the remote
directly
control to go to the desired
file directly.
HLS36W-NB_DUSALLK_ENG_6880.indd 15
2010-12-20 �� 9:30:58
16 Operating
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
Displaying file and input
source
You can display various information on the USB and
OPTICAL IN 1/ 2 mode by pressing INFO..
To check the remaining time, press SLEEP.
USB : MP3/ WMA containing file information
OPTICAL IN 1/ 2 : Audio format, Audio channel
To cancel the sleep function, press SLEEP repeatedly
until“SLEEP 10”appears, and then press SLEEP
once again while“SLEEP 10”is displayed.
Note
,,
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.
3
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
Turn off the sound temporarily
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, appearing the
display window.
in the
Adjust the woofer level
settings
You can adjust the sound level of woofer.
1. Press WOOFER LEVEL.
2. Press VOLUME -/+ to adjust the sound level of
the woofer.
HLS36W-NB_DUSALLK_ENG_6880.indd 16
2010-12-20 �� 9:30:58
Operating 17
Note
,,
Sound adjustment
In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
y
y
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
The displayed items for the equalizer may be
different depending on sound sources and effects.
On Display
Description
You can enjoy comfortable
and natural sound.
NATURAL
3
You can enjoy the sound
without equalizer effect.
BYPASS
BASS
The BASS is Bass Blast. During
playback, reinforce the treble,
bass and surround sound
effect.
The CLRVOICE is Clear Voice.
This program make voice
sound clear, improving the
quality of voice sound. (We
encourage to use this EQ
when you watch the movie of
5.1 channel.)
CLRVOICE
The VIRTUAL is VSM Plus.
You can enjoy more virtual
surround sound.
VIRTUAL
GAME
The GAME is Game Equalizer.
You can enjoy more virtual
sound while playing video
games.
The NIGHT is Night Mode.
This may be useful when you
want to watch movies at low
volume late at night.
NIGHT
The UPSCALER is MP3 Up-
Scaling. When listening to
MP3 files or other compressed
music, you can enhance the
sound. This mode is available
only to 2 channel sources.
UPSCALER
LOUDNESS
Improves the bass and treble
sound.
HLS36W-NB_DUSALLK_ENG_6880.indd 17
2010-12-20 �� 9:30:58
18 Operating
Listening to music stored on
the Bluetooth devices
Using Bluetooth
technology
Pairing your unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo Headset.)
1. Select the Bluetooth function by using the
INPUT.
Appears“BT”and then“BT READY”in display
window.
3
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as“LG AUDIO”.
3. Enter the PIN code.
PIN code : 0000
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears“PAIRED”.
A2DP (Advanced Audio Distribution Profile)
Note
,,
AVRCP (Audio/ Video Distribution Remote Control
Profile)
Depending on the Bluetooth device type,
some device have a different pairing way.
y
y
This function is recommended to use to
listening to music. While using Bluetooth
headset, sound and images may not
be matched depending on the wireless
environment or the connection conditions.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
Note
,,
If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
y
y
y
(Bluetooth
Bluetooth)
Function other than the
AVRCP is not supported in this mode.
HLS36W-NB_DUSALLK_ENG_6880.indd 18
2010-12-20 �� 9:30:58
Operating 19
Operating with Bluetooth device
You can operate a unit by connecting a Bluetooth
device using AVRCP. For details about operation,
refer to the Bluetooth device’s User Guide.
Listening to sound through
the Bluetooth devices
Pairing your unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
Note
,,
These operations may not be vailable for
certain Bluetooth device. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
1. Select a function other than the Bluetooth
Connecting and disconnecting with a
Bluetooth device
function by using the INPUT.
2. Place the Bluetooth device to be connected to
this unit within 3 feet of the unit.
This function is operated after pairing.
3
Press BLUETOOTH to connect or disconnect with a
Bluetooth device.
3. Put the Bluetooth device in pairing mode.
Refer to your Bluetooth device’s user guide.
Appears in as below display window.
4. Press and hold BLUETOOTH.
Appears“INQUIRY”.
Connection : BT CONN
Disconnection : DISCONN
If searched Bluetooth is only one, pairing the
unit. Refer the step 7.
Note
,,
5. Appears depending on type of Bluetooth
devices in display window .
If you change the function of the unit, the
Bluetooth function is disconnected, press
BLUETOOTH pairing again.
6. Select a Bluetooth device you want to connect
by using WS FOLDER and press Z (STOP).
y
(Bluetooth
Bluetooth)
Function other than the
7. Enter the PIN code by using numberical
buttons.
PIN code : 0000
8. Press Z (STOP) to confirm.
When this unit successfully paired with your
Bluetooth device, Bluetooth icon of this unit
lights up and appears“BT SRC”.
You can listen to music played on this unit using
your Bluetooth device.
Sound output from the speakers is stopped.
Note
,,
You cannot use VOL (volume), SOUND EFFECT,
WOOFER LEVEL buttons on the remote control
or the unit in this mode.
HLS36W-NB_DUSALLK_ENG_6880.indd 19
2010-12-20 �� 9:30:58
20 Operating
Note
,,
Checking the information of
connected Bluetooth device
This units does not be supported the Mono
Headset Profile (Hands Free Profile)
y
y
This function is operated after pairing. You can
check the Bluetooth information.
The sound may be interrupted when
the connection interfered by the other
electronic wave.
Press and hold INFO. repeatedly.
Bluetooth information is changed as follows.
You cannot control the Bluetooth device
with this unit.
y
y
y
Local Bluetooth Device Address t Device Name
t None t ...
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
Although the distance between your
Bluetooth and the set is less than 10m, there
are obstacles between both, your Bluetooth
device cannot be connected.
3
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, headset, etc..
y
y
y
When not connected the Bluetooth,“BT
READY”appears on the display window.
The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y
y
If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10m.
y
HLS36W-NB_DUSALLK_ENG_6880.indd 20
2010-12-20 �� 9:30:58
Operating 21
Setting up the remote to
Controlling a TV with
the Supplied Remote
Control
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
You can control your TV using the buttons below.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
LG
Code Number
1(Default), 2
Zenith
1, 3, 4
1, 2
6, 7
8, 9
4
3
Button
Operation
GoldStar
Samsung
Sony
1 (TV POWER)
Turn the TV on or off.
Switch the TV’s input source
between the TV and other
input sources.
AV/INPUT
Hitachi
Adjust the volume of the
TV.
VOL +/–
2. Release the 1 (TV POWER) button to complete
setting.
Scan up or down through
memorized channels.
PR/CH W/S
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Note
,,
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
HLS36W-NB_DUSALLK_ENG_6880.indd 21
2010-12-20 �� 9:30:59
22 Troubleshooting
Troubleshooting
PROBLEM
CORRECTION
Plug in the power cord.
No Power
No sound
Check the condition by operating other electronic devices.
Press FUNCTION and check the selected function.
The power cord of woofer is not connected. Plug the power cord into the wall outlet
securely.
Pairing between the unit and woofer gets disconnected. Connect the unit and woofer.
(Refer to the page 12)
The remote control is too far from the unit.
Operate the remote control within about 23 ft (7m).
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The remote
control does
not work
properly.
The battery in the remote control is exhausted.
Replace the battery with new one.
4
HLS36W-NB_DUSALLK_ENG_6880.indd 22
2010-12-20 �� 9:30:59
Appendix 23
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide
spray near the unit.
y
y
y
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
5
HLS36W-NB_DUSALLK_ENG_6880.indd 23
2010-12-20 �� 9:30:59
24 Appendix
Trademarks and
Licenses
Manufactured under license from Dolby Labo-
ratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks & DTS Digital Surround
and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
5
Bluetooth® wireless technology is a system
which allows radio contact between electronic
devices within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless tech-
nology can be operated via the Cascade if the
connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
HLS36W-NB_DUSALLK_ENG_6880.indd 24
2010-12-20 �� 9:30:59
Appendix 25
Specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
Bus Power Supply (USB)
Refer to main label.
Refer to main label.
(39 x 3 x 20) inches without foot
5.1 lbs
41 °F to 95 °F (5 °C to 35 °C)
5 % to 90 %
DC 5 V 0 500 mA
Inputs
DIGITAL IN (OPTICAL IN)
PORT. IN
3 V (p-p), Optical jack x 2
0.5Vrms (3.5 mm stereo jack)
Amplifier
Stereo mode
Subwoofer
70 W + 70 W (4 Ω at 1 kHz)
140 W (3 Ω at 60 Hz)
Wireless subwoofer
5
Power requirements
Power consumption
Reception Output
Type
Refer to main label on the Subwoofer.
Refer to main label on the Subwoofer.
5.8 GHz
1 Way 1 Speaker
3 Ω
Impedance Rated
Input Power
140 W
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
280 W
(8 x 15 x 12) inches
15.2 lbs
Designs and specifications are subject to change without prior notice.
HLS36W-NB_DUSALLK_ENG_6880.indd 25
2010-12-20 �� 9:30:59
HLS36W-NB_DUSALLK_ENG_6880.indd 26
2010-12-20 �� 9:30:59
Warranty 27
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in
material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below,
effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty
is good only to the original purchaser of the product and effective only when used in the United States,
excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of
Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of
Purchase.
Please retain dated sales receipt and your box to return
the unit to LG for repair or replacement.
•
Parts replaced are warranted for the
remaining portion of the original
warranty period
Shipping both ways will be paid by LG during the Warranty
Period. After the Warranty Period, you pay inbound shipping
charges and LG pays return shipping charges.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE
FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY
NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR
ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not
allow the exclusion or limitation of incidental or consequential damages or limitation on how long an
implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you
specific legal rights and you may also have other rights that may vary from state to state.
6
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls,
calibration, maintenance or failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation
outside environmental specifications or contrary to the requirements or precautions in the Operating
Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration,
incorrect electrical current or voltage, reception problem caused by inadequate home antenna or faulty
antenna connections, computer software, institutional or commercial use, or other causes not arising
out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center,
Where to buy, Product Assistance, or
Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
HLS36W-NB_DUSALLK_ENG_6880.indd 27
2010-12-20 �� 9:30:59
LG Customer Information Center
1-800-243-0000
1-888-865-3026
USA, Consumer
USA, Commercial
Register your product Online!
Printed in China
HLS36W-NB_DUSALLK_ENG_6880.indd 28
2010-12-20 �� 9:30:59
|