Kenwood Two Way Radio TK 280 User Manual

Nov-06  
* All Models Discontinued - Availability through 1Q 2007  
Land-Mobile Price List  
TK-280/380  
VHF / UHF Trunking / Conventional Portable Radios  
Model  
Description  
List  
VHF  
Spring Action Belt Clip included; Antenna, Battery & Charger not included  
146-174 MHz 5W, LTR-32 Systems, CONV-250 CH.  
TK-280K  
TK-280K3  
TK-280K2  
TK-280K4  
$517.00  
550.00  
517.00  
550.00  
146-174 MHz 5W, LTR-32 Systems, CONV-250 CH., w/DTMF  
136-162 MHz 5W, LTR-32 Systems, CONV-250 CH.  
136-162 MHz 5W, LTR-32 Systems, CONV-250 CH., w/DTMF  
UHF  
Spring Action Belt Clip included; Antenna, Battery & Charger not included  
470-512 MHz 4W, LTR-32 Systems, CONV-250 CH.  
TK-380K2  
TK-380K3  
TK-380K6  
517.00  
517.00  
567.00  
400-430 MHz 4W, LTR-32 Systems, CONV-250 CH.  
400-430 MHz 4W, LTR-32 Systems, CONV-250 CH., w/DTMF  
TK-280/380 FEATURES:  
Minimum Volume  
Control Tones On/Off  
FLEETSYNC® CONT.....  
GENERAL FEATURES  
ST# 90- Stun radio (No TX)  
ST# 91- Stun radio (No TX / No RX audio)  
ST# 92- Turn off Stun  
ST# 93- ACK stun is ON  
ST# 94- ACK stun is OFF  
5W VHF / 4W UHF Transmit Power  
Wide Band Frequency Ranges  
12.5 / 25 kHz Channel Spacing  
Programmable Power Per Channel  
Companded Audio Per Channel (wide &  
narrow*)  
Embedded Message (64 Char.)  
Data Password (“Anti-piracy”)  
Radio Password (Radio Lock)  
Clone Capability (enable/disable)  
Front Panel Field Programming & Tuning  
Windows® PC Programming/ Tune Software  
Flash ROM Firmware  
MIL810 C, D & E (11 categories)  
CONVENTIONAL MODE  
250 CH (aggregate max.)  
Single Priority Scan  
Single/Multi-Group Scan  
Scan Revert Channel Display  
Scan Delete/Add  
Nuisance Delete  
ST# 80-87, 95-97 (Reserved for future use)  
Selective Call  
Short Text Messages** (stored/display)  
---------------------------------------------  
* Features added in Ver. 2 radios  
** Fleetsync® Enhanced Option required (included  
as of 10/1/02)  
---------------------------------------------------  
INCLUDED ITEMS  
500 mW Audio Power  
Lighted Front Panel Dot Matrix LCD  
10 Character Alphanumeric Display  
3 Numeric Character Sub-Display  
Dot Matrix Lighted LCD  
LCD Operational Icons  
Two Color Tri-State LED  
5 Programmable Function Keys (lighted)  
DTMF Keypad Models  
Spring Action Belt Clip, Instruction Manual  
Shift Key Function (keypad models)  
Optional Speaker Mic (w/ 2 PF Keys)  
Recessed Orange Emergency/AUX Key  
Encryption/Scrambler Board Control  
ANI Board Control  
QT/DQT Encode & Decode  
Operator Selectable Tone (16 OST)  
2-Tone Decode (A, B, C, A-B, A-C, C-B; 2 decode pai
BCL, BCL Override, TOT & TA  
TRUNKED MODE  
32 Systems (max.)  
PTT ID Side-Tone (ANI Boards)*  
PTT ID TA Inhibit*  
Trunked LTR & Conventional Systems  
250 Group IDs (aggregate max.)  
Single Priority Scan (within any Conv. System only)  
LTR Talk Around / Scan Revert Group Display  
System Scan & Group Scan / Auto System Search  
FLEETSYNC®  
PTT ID (Digital ANI; 100 ID List capacity*)  
- Caller ID Display (per CH; BOT only)*  
- Caller ID Stack (last 3 calls)*  
Status Messaging (50 Msg. List capacity*)  
- 70 Custom Dispatch Messages  
- 9 Reserved Special Use Messages  
ST# 99- Emergency Status  
Emergency Type (FS, DTMF, ANI Brd.)*  
Emergency Calling Feature  
Key Lock Feature  
DTMF Decode Selective Call  
DTMF Deadbeat Disable  
DTMF PTT ID & DTMF Emergency ID*  
Alert with Transpond (2-Tone, DTMF)*  
Call Alert Tone: Mom or Continuous  
(2-Tone, DTMF & FleetSync®)*  
Auto-Dial Memory (32 numbers)  
Key Lock Feature  
Low Battery Alert  
Weather-Sealed Accessory Connector  
PTT Release Tone  
ST# 88- Emergency Mode Off*  
ST# 89- Horn Alert Request* (mobiles)  
Page 1 of 5  
TK-280_380  
 
Nov-06  
QE-2 G-Star®/ MDC1200 DIGITAL ANI MODULES by Cimarron Technologies  
How to Order: Please see QE-2 Information and Order Sheet available from LMR Order Desk  
1. Select the proper model/ quantity of radios, desired MDC-1200 (L-901) or G-Star (L-902) ANI format labor code.  
2. Refer to the "QE-2 MDC-1200 Information/Order Sheet" available from the LMR Order Desk; select the ID format, ID codes and other feature options  
3. Fax the Order Sheet with your radio order to your authorized Kenwood Rep or LMR Order Desk  
All order sheet items must be filled out even if the feature option is "disabled" (incomplete Order Sheets will not be processed).  
a. QE-2's are Kenwood installed only; these are not available as "shipped loose" (pre-programmed or not).  
b. Allow a min. 1 week delivery ARO for 1- 25 units (allow min. 3 weeks for 25 units and up).  
G-Star® or MDC1200 ANI Board : PTT ANI, emergency & man-down  
Important Factory Install Only – Order L-901 or L-902  
QE-2  
128.00  
Transcrypt Secure Technologies Encryption  
The following Transcrypt Secure Technologies encryption accessories (available from Transcrypt) and TK-280/380/480/481 combination when installed according to  
Transcrypt instructions meet Intrinsically Safe Classes I, II & III, Div.1, Groups C, D,E, F & G hazardous locations and Non-Incendive Class I, Div. 2, Groups C, D  
hazardous locations:  
· SC20-400  
· SC20-416-12  
· SC20-430-12  
· SC20-460-12  
Transcrypt Secure Technologies  
4800 NW 1st Street, Suite 100  
Lincoln, NE 68521  
Phone: 402-474-4800  
Fax: 402-479-8472  
SERVICE RELATED ACCESSORIES  
Programming interface Cable  
KPG-36  
N/A  
N/A  
P.C. Programming Software for TK-280/380/480/481/780/880/980/981  
KPG-49DK  
Page 3 of 5  
TK-280_380  
 
Nov-06  
Installation/Tuning Charges for the TK-280/380 Series Radios  
Model  
Description  
List  
%start labor codes  
Assemble KMB-16 with six KSC-24's (Rapid Rate, 120 Volt version only)  
Assemble KMB-23 with six KSC-24/25/32 (Rapid Rate, 120 Volt versions only)  
TK-280/380 Programming (with basic TX/RX check)  
L-836  
L-961  
L-855  
L-856  
L-980  
15.00  
17.00  
25.00  
70.00  
70.00  
Configure TK-280/380 for Intrinsically Safe (Must Order KNB-17BK)  
Configure TK-280/380/480/481/385 (KNB-22NC for Intrisically Safe(Must Order KNB-22NC)  
Program and install QE-2 MDC1200 Encoder  
Program and install QE-2 G-Star® Encoder  
L-901  
L-902  
75.00  
75.00  
PassPort® Options (Kenwood-installed)  
FOR NEW RADIO ORDERS ONLY  
Ordering Instructions  
For VHF/UHF models TK-280/780/380/880 new radio orders, the Kenwood-installed PassPort® ESN / firmware option is no charge:  
Order the PassPort® ESN/Firmware option L-938 for each PassPort® radio.  
Other required items:  
a. KPG-63D Radio Programming Software: the KPG-63D is required to program all PassPort® parameters for all PassPort® enabled  
radios, the KPG-63D will not program LTR or conventional parameters.  
b. KPG-49D is required only if LTR or conventional systems are to also be programmed in the PassPort® radio.  
Model  
L-938  
Description  
List  
0.00  
Install PassPort® ESN options and firmware; NO CHARGE for new TK-280/380/780/880 orders  
Note: Only current 80-Series Version 2.0 production radios (“Ver. 2.0” appears on FCC ID label)  
PassPort® Radio Programming Software  
PassPort® Radio Programming Software V2.00 or higher  
KPG-63DK  
65.00  
PassPort® Options (Field-installation kits)  
FOR DEALER / OPERATOR FIELD CONVERSIONS  
Ordering Instructions  
1. Order the ESN key/firmware Labor Code options: L-892, L-893 or L-894; specify model radio(s).  
Pre-loaded ESN hardware key(s) with the ordered quantities of ESN's and a PassPort® radio firmware diskette will be shipped (100 ESN’s  
maximum per hardware key). Important: Any depleted key previously registered to a technicians computer must be retained to  
register any new purchased key to the computer; please retain the old key until the new one is received.  
2. Other required items:  
a. KPG-64D: PassPort® ESN Install Program: the KPG-64D only needs to be ordered one time. It is re-usable for subsequent ESN orders  
(unless an upgrade is recommended).  
b. KPG-63D Radio Programming Software: required to program all PassPort® parameters for all PassPort® enabled radios, the KPG-63D will  
not program LTR or conventional parameters.  
c. KPG-49D Radio Programming Software: required only if LTR or conventional systems are also tbe programmed in the PassPort® radio.  
3. The KPG-49D radio programming software is required for LTR & conventional site programming 2.  
Page 4 of 5  
TK-280_380  
 
Nov-06  
Model  
Description  
List  
PassPort® ESN Options & PassPort® firmware disk (SPECIFY RADIO MODEL)  
· 1-24 qty. lot price; Price is per ESN  
L-892  
L-893  
L-894  
$68.00  
68.00  
68.00  
PassPort® ESN Options & PassPort® firmware disk (SPECIFY RADIO MODEL)  
· 25-99 qty. lot price; Price is per ESN  
PassPort® ESN Options & PassPort® firmware disk (SPECIFY RADIO MODEL)  
· 100 qty lot price; Price is per ESN  
· Maximum 100 ESN options per hardware key  
Note: Sales of L-892, 893, 894 are NOT refundable. Purchaser has a 72 hour limit after receipt to report suspected hardware key defects or ESN shortages to  
Kenwood engineering, Suwanee office 678-474-4700  
Hardware Key (Sentinel Super Pro)  
SRB08698  
83.33  
NOTES:  
· Requires purchase of L-892, 893 or 894  
· Sales of L-892, 893, 894 are NOT refundable  
· Maximum 100 ESNs per hardware key  
· Requires KPG-64D to download PassPort TM ESN options into an 80-Series radio.  
· Important: The hardware key is registered to the computer that it is first used on; it cannot be used on other computers.  
· Empty hardware keys can be returned for 50% credit; call the LMR order desk for RMA #.  
· Important: Retain depleted keys until a new one is received. It will be required to register the new key to the same computer.  
PassPort® ESN Field Installation Software V1.12  
KPG-64D  
10.00  
65.00  
· V1.12: supercedes V1.11; upgrade to V1.12 recommended for improved ESN file database features  
PassPort® Radio Programming Software V2.00 or higher  
KPG-63D  
IMPORTANT NOTES:  
1
For intrinsically safe models TK-190/280/380/290/390/480/481: Meets Intrinsically Safe Classes I, II & III, Div. 1, Groups C, D, E, F, G hazardous locations  
and Non-Incendive Class I, Div. 2, Groups C, D hazardous locations.  
2 Important Note Regarding Intrisically Safe Certification: Using an Intrinsically Safe battery on a radio does not constitute an Intrinsically Safe (I.S.) radio.  
All Kenwood I.S. radios must be certified at Kenwood by inspection, logging & proper labeling. The appropriate I.S. labor code must be specified on all I.S.  
radio orders and the proper model I.S. battery must be used with the radio. Kenwood I.S. batteries can be purchased separately for existing Kenwood  
certified I.S. radios. Intentionally or inadvertently representing a Kenwood radio as I.S. without proper Kenwood certification can result in serious safety and/or  
legal liability issues for your company.  
3 AA refillable packs DO NOT meet any of the MIL-STD environmental standards, nor are they water-resistant or Intrinsically Safe approved.  
Actual battery life is dependent on battery condition, type, quality, temperature, and use habits. Alkalines exhibit non-linear voltage vs. current drain  
characteristics, therefore radio transmit power will lower and decrease during transmit and as the battery is drained. Nominal Life (hrs.) 5-5-90 duty cycle,  
battery save off, scan off. See chart below:  
Transmit Power  
Nominal Battery Life (hrs.)  
1W  
18  
2W  
11.5  
4/5W  
4
4 KVC-5 & KVC-6 has the following features: Accommodates Speaker/Microphones of KMC-25/26 (for KVC-5), and KMC-17/21 (for KVC-6), with retainer  
brackets; Rapid Charge LED (red) -- "on" when portable radio is properly seated and battery is in rapid charge mode, Trickle Charge LED (green) -- "on"  
when the battery is fully charged and the charger is in the trickly charge mode, repeat enable LED (yellow) -- "on" when the Automatic Enable switch is on  
and the portable is removed (it goes "off" when portable is inserted), and Automatic Repeat Enable Switch (activates the vehicular repeater units, e.g.  
Pyramid Communications brand SVR units). Note: These units are ONLY charger units. They are NOT vehicular adapters with RF, P.A., AF P.A., antenna  
connector, speaker & mobile hand mic. (a.k.a.; "console", "vehicular console", "convert-a-com", "jerk & run").  
5 Retain the screws included with the metal belt clip (included with radio). These are required to attach the KBH-8 or KBH-8DS. Screws also available from  
Parts Dept.: Part # N99-2004-05.  
6 Required to program both normal radio parameters and all FleetSync TM feature parameters.  
7 Important Note regarding KNB-21N/22N/22NC:  
- NiMH batteries will exhibit reduced capacity while exposed to temperatures below 14°F(-10°C) and become virtually unusable below -4°F or  
(-20°C). NiMH batteries are commonly used in extreme low temperature environments (ex: northern latitudes, refrigerated warehousing, etc.) by  
keeping the portable next to the body under the users coats. Prolonged exposure to extreme cold should be avoided for proper radio operation.  
- NiMH batteries capacity life is slightly lower than NiCd:  
NiCd : 70% at 500 cycles vs. NiMH (1600 mAh): 60% at 500 cycles  
Meets Intrinsically Safe requirements of Classes I, II, III, Division 1, Groups C, D, E, F, G, & Non-Incendive Class I, Division 2, Gropus C, D hazardous  
locations.  
The KNB-22NC is labeled "KNB-22NC is an authorized alternate to KNB-17B" and therefore the KNB-22NC can be sold into existing portable fleets using  
8
KNB-17BK and not compromise the portables I.S. certification.  
The KNB-22NC does NOT require re-adjustment of the Low Battery Warning settings. Portables previously inspected & readjusted by Kenwood Tuning  
Dept. or  
the dealership for KNB-17B Low Battery Warning should be re-adjusted for the Low Battery Warning factory default setting (per the service manual).  
Page 5 of 5  
TK-280_380  
 

InFocus Projector Accessories PRJ WALLKIT 13 User Manual
Intel Computer Accessories 40A User Manual
Intel Crib Toy D2700 User Manual
IOGear Network Card GBU321 User Manual
JBL Car Speaker GTO15T User Manual
JVC Speaker TS C500SPG User Manual
Kenwood Car Video System KDV MP765 User Manual
Kenwood Video Gaming Accessories PS 50 User Manual
KitchenAid Dishwasher KUDE70CVSS1 User Manual
Kramer Electronics Projector VP 725NA User Manual