Use & Care Guide
Manuel d’utilisation et d’entretien
English / Français
Models/Modèles: 253.25001, 253.25002, 253.25003
Kenmore
®
'HKXPLGLoHU
'ÑVKXPLGLoFDWHXU
P/N 2020264A0337
Sears Brands Management Corporation
Hoçman Estates, IL 60179 U.S.A.
Master Protection Agreements
Congratulations on making a smart purchase. Your new Kenmore® product is designed and manufactured for years of
dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s
when having a Master Protection Agreement can save you money and aggravation.
*
The Master Protection Agreement also helps extend the life of your new product. Here’s what the Agreement
includes:
Parts and labor needed to help keep products operating properly under normal use, not just defects. Our
coverage goes well beyond the product warranty. No deductibles, no functional failure excluded from coverage
— real protection.
Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone
you can trust will be working on your product.
Unlimited service calls and nationwide service, as often as you want us, whenever you want us.
“No-lemon” guarantee — replacement of your covered product if four or more product failures occur within twelve
months.
Product replacement if your covered product can’t be fixed.
Annual Preventive Maintenance Check at your request — no extra charge.
Fast help by phone — we call it Rapid Resolution — phone support from a Sears representative on all products.
Think of us as a “talking owner’s manual.”
Power surge protection against electrical damage due to power fluctuations.
$250 Food Loss Protection annually for any food spoilage that is the result of mechanical failure of any covered
refrigerator or freezer.
Rental reimbursement if repair of your covered product takes longer than promised.
10% discount off the regular price of any non-covered repair service and related installed parts.
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment online.
The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product
warranty period, we will provide a full refund. Or, a prorated refund anytime after the product warranty period
expires. Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and additional information in the U.S.A.call
1-800-827-6655.
Coverage in Canada varies on some items. For full details call Sears Canada at 1-800-361-6665.
*
Sears Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call 1-800-4-MY-HOME®.
R e a d a n d S a v e T h e s e In s t r u c t io n s
This Use & Care Guide provides specific operating instructions for your model. Use the
air conditioner only as instructed in this guide. These instructions are not meant to
cover every possible condition and situation that may occur. Common sense and
caution must be practiced when installing, operating, and maintaining any appliance.
Record Your Model and Serial Numbers
Record in the space provided below the model and serial numbers. The serial plate is
located on the outside of the cabinet, or behind filter at the bottom of unit. Reading
the numbers may be easier by using a flashlight or by removing the cabinet front as
instructed under “ Care and Cleaning. ”
Model Number :___________________________________________________________
Serial Number : ____________________________________________________________
Purchase Date : ____________________________________________________________
3
Important Safety
Instructions
Read all instructions before using this dehumidifier.
For Your Safety
WARNING
NOTE This USE & CARE GUIDE
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance. Read product labels for flammability and other warnings.
Discard water from bucket. Water is not potable and cannot be used for drinking.
provides specific operating instructions for your
model. Use the dehumidifier only as instructed in
this USE & CARE GUIDE. These instructions are
not meant to cover every possible condition and
situation that may occur. Common sense and
caution must be practiced when installing,
operating, and maintaining any appliance.
Child Safety Precautions
WARNING
Destroy the carton, plastic bags, and any packing materials immediately after the
dehumidifier is unpacked. Children should never use these items for play.
Do not leave children unattended in an area where the appliance is operating.
Do not allow them to sit or stand on the appliance.
WARNING
Avoid fire hazard or electric
shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong from
the power cord.
Grounding type wall
receptacle
WARNING
Electrical Information
For your safety and protection, this dehumidifier is equipped with a three-prong grounding
plug on the power cord. Do not, under any circumstances, cut or remove the round ground
prong from the plug.
Your dehumidifier must be plugged directly into a properly grounded and polarized
three-prong receptacle. lf the wall receptacle you intend to use will not accept a
three-prong plug, or if you are not sure the outlet is adequately grounded or protected
by a time delay fuse or circuit breaker, have a qualified electrician install the proper outlet
according to the National Electrical Code and applicable local codes and ordinances. Do not
use an extension cord or an adapter plug.
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.
Never unplug the dehumidifier by pulling on the power cord. Always grip the plug firmly
and pull straight out from the receptacle.
Do not pinch, bend, or knot the power cord.
Power supply cord
with 3-prong grounding
plug
Selecting a Location
IMPORTANT:
Location
1. Dehumidifier must be operated in an enclosed area to be most effective. Close all doors,
windows, and other outside openings to the room. The effectiveness of the dehumidifier
depends on the rate at which new moisture-laden air enters the room.
2. Place dehumidifier in a location that does not restrict airflow through the front of the unit or
out of the louvers on the left side of cabinet.
3. A dehumidifier operating in a basement will have little or no effect in drying an adjacent
enclosed storage area, such as a closet, unless there is adequate circulation of air in and out
of the area. lt may be necessary to install a second dehumidifier in the enclosed area for
satisfactory drying.
4. The dehumidifier must be installed on a level floor that will support it with a full bucket of
water.
5. There should be a minimum of 30.5cm clearance around the dehumidifier.
When the unit is started, the fan begins to pull moisture-laden air across the dehumidifying
coils.
How It Works
The coils condense or draw moisture from the air, and air flows through the side louvers into the
room as dry, warm air. Moisture removed from air is collected in a bucket on the front of the
dehumidifier.
The unit is designed to operate between 5 °C (41 °F), and 35 °C (96 °F).
The "Compressor" circuit has an automatic 3 minute time delayed start if the unit is turned off
and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping.
Make sure the tank is fitted correctly otherwise unit will not turn on.
4
Dehumidifier Feature
Allow the unit to reach room temperature before operating.
To begin operating the dehumidifier, follow these steps:
NOTE: Unit must be upright for one hour prior to operating.
1. Plug the power cord into a properly grounded 115 volt AC outlet. The POWER indicators will illuminate.
NOTE: If the "BUCKET FULL" light is on, remove the bucket and reinstall it to reset the float switch.
2. To turn the unit on, press the ON/OFF button. The unit will run in the factory setting of CONTINUOUS and high fan speed.
In the Continuous Mode the unit will only display CO and not the room humidity. It is recommended you leave the unit
running in the CONTINUOUS setting for the first three or four days until the sweating and dampness odors have stopped.
3. After a few days, when the Relative Humidity has declined, press the HUMIDITY
between 35% to 85%, so the room is kept at a comfortable concentration. Pressing the
humidity selection in 5% increments. After you have set the desired humidity, the readout will display the actual room
or buttons to choose a value
or buttons will change the
humidity. If at any time you want to return to the CONTINUOUS Mode, pressing the HUMIDITY
Relative Humidity through the 5% increments until the display reads CO.
button will lower the
5
Dehumidifier Feature
(continued)
4. You can also use the FAN SPEED button to change the fan speed to HIGH or LOW. The indicator light will show the setting
you have selected. A higher fan speed will result in quicker moisture removal.
5. The FILTER RESET light will illuminate after 250 hours of operation. At this time, refer to the “Care and Cleaning section
to remove and clean the filter. Once the filter has been cleaned, simply press the FILTER button to extinguish the light.
6. The TIMER function enables you to either Delay Start or Delay Stop the unit in the choice from 0.5 hour to 24 hours. If the
unit is running, then selecting Timer will turn the unit off after setting hours (Delay Stop). If the unit is off, then selecting
Timer will turn the unit on after setting hours (Delay Start).
TIMER setting: First press TIMER button, then to adjust timer setting, tap or hold the or button to change the delay
timer at 0.5 hour increments, up to 10 hours, then by 1 hour increments up to 24 hours. The control will count down the
time remaining (8,7.5,7, etc.) until the unit either starts or stops. For the Delay Start, the fan speed and humidity
maintained will be the same as previous setting. After TIMER setting finishes, pressing TIMER button again at any time will
cancel the
TIMER function. The Delay Start/Stop Feature will work until the unit either starts ro stops. Once that happens, the above
steps will have to be repeated again.
NOTE: 1. Before entering TIMER setting, the power indicator must be lit to make sure power is being supplied to the unit.
2. Before entering TIMER setting, make sure first pressing HUMIDITY or button sets one desired room humidity.
6
Dehumidifier Feature
(continued)
7. To shut the unit down, press the ON/OFF button.
NOTE: While the unit is plugged in, the power indicator will remain lit. Only removing the plug will extinguish this light.
Fault Codes
If the display reads "AS" or "ES" , a sensor has failed. Contact 1-800-4-MY-HOME® for repair.
Removing Collected Water
1. Emptying the bucket:
a. When the bucket is full, the unit will shut down and the BUCKET FULL indicator light will illuminate.
7
Removing Collected Water
(continued)
b. Do not move the unit at this point, otherwise water may spill on the floor.
c. Press sides of bucket gently to unclip the bucket from the unit.
d. Remove the bucket as shown in the photographs below and empty the bucket.
WARNING: Discard water from bucket. Water is not potable and cannot be used for drinking.
e. Replace the empty bucket back into the unit and once seated correctly, the unit will start up again.
f. You should hear a click when the bucket is in the correct position
If the bucket full light does not extinguish, check that the float is correctly snapped in place as indicated by the diagram.
2. Continuous Drainage:
a. For constant drainage operation, you will need a garden hose and a drain nearby to discharge the water into.
b. Remove the bucket from the unit and set aside.
c. Lift up the side flap located on the right side of the unit as Iooking from the front. (fig.1)
d. Insert the female threaded end of the hose through the opening. (fig.2)
e. Screw the garden hose onto the threaded portion of the tray underneath the bucket opening. (fig.3)
f. Make sure the hose is secure so there are no leaks.
g. Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing.
h. Place the end of the hose into the drain.
i. Place the bucket back in the unit and make sure that it is located correctly. (fig.4)
j. Select the desired humidity setting and fan speed on the unit for continuous draining to start.
fig. 1
fig. 2
fig. 3
fig. 4
NOTE: If the unit stops operating, check if the bucket full light is illuminated. If it is, remove the bucket, and empty the
contents and then check the seal between the hose and the drip tray. If there is a small leak, then replace the hose gasket
and re-tighten the hoseˊ
8
Care and Cleaning
1. Filter
a. Clean the filter every two weeks based on normal operating conditions.
b. To remove the filter, remove bucket then pull filter downwards.
c. Wash the filter with clean water then dry.
d. Reinstall the filter, then replace bucket.
2. Cabinet
a. Dust cabinet with an oil-free cloth, or using a damp cloth.
b. Vacuum grill using brush attachment.
3. Water Bucket
a. Clean bucket with warm water and detergent.
Power Cord Storage
When unit is not in use, unplug and use the cord wrap shown for your model type.
1.
2.
9
Dehumidifier Troubleshooting Guide
DEHUMIDIFIER DOES NOT OPERATE.
Check if
⋯
Then
⋯
Wall plug disconnected.
Push plug firmly into wall outlet.
House fuse blown or circuit breaker tripped.
The dryness level you selected has been reached.
Replace fuse with time delay type or reset circuit breaker.
Dehumidifier automatically shuts off when selected amount of moisture has been
removed from the air. If you want to remove more moisture, select
'CONTINUOUS' by using the humidity button or knob. After the dehumidifier
starts, reset the control to the desired setting.
Bucket not installed properly.
Reinstall the bucket properly. See “Removing Collected Water“ for reference.
Empty bucket and return bucket to position.
Water in the bucket has reached its preset level.
Turn unit on.
Dehumidifier is not turned on.
“BUCKET FULL“ light is on.
Remove bucket, empty water and reinstall it correctly.
DEHUMIDIFIER RUNS TOO MUCH.
Check if
⋯
Then
⋯
Windows or doors near dehumidifier are open to outdoors.
Area to be dehumidified is too large.
Close all windows or doors to outside.
Check with your dealer to see if capacity is adequate.
Air movement through dehumidifier is blocked.
Dehumidifier must be placed in a space that does not restrict air flowing into the
rear coil and out of the front grill.
Grill may be dirty.
Use brush attachment of vacuum cleaner to clean grill. See “Care and Cleaning“
for reference.
Dehumidifier is in the CONT mode and will remain in this mode . Use the humidity button or knob to set a RH% higher level.
DEHUMIDIFIER IS OPERATING BUT ROOM IS NOT DRY ENOUGH.
Check if
⋯
Then
⋯
Humidity setting is too high.
Press the HUMIDITY button or rotate knob to a lower setting to choose
CONTINUOUS for maximum dryness.
Dehumidifier has been installed or restarted recently.
The higher the moisture in the room air is, the longer it will take to dry the room air.
See “Selecting a Location“ to select a proper location.
Dehumidifier does not have sufficient clearance to operate, or
air flow to front grill is blocked.
Room temperature is too low.
Unit will not operate satisfactorily if the room temperature is below 5 °C(41 °F).
See “How It Works“ for reference.
Dehumidifier runs too much.
Refer to some of the causes under DEHUMlDIFIER RUNS TOO MUCH.
FROST APPEARS ON COILS ABOVE BUCKET OR DRIP TRAY.
Check if
⋯
Then
⋯
Dehumidifier has been turned on recently.
Room Temperature is too low.
FAN NOISE.
This is normal due to refrigerant rushing through the coil. Frost will usually
disappear within 60 minutes.
All models will operate satisfactorily at temperatures higher than 5 °C (41 °F).
Check if
⋯
Then
⋯
Air is moving through the dehumidifier.
This is a normal sound.
10
Get it fixed, at your home or ours!
Your Home
For troubleshooting, product manuals and expert advice:
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME® (1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.)
1-800-469-4663 (Canada)
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
MC
1-800-LE-FOYER
1-888-SU-HOGAR®
(1-800-533-6937)
(1-888-784-6427)
® Registered Trademark / TM Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries
® Marca Registrada / TM Marca de Fábrica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros países
MC Marque de commerce / MD Marque déposée de Sears Brands, LLC
11
|