Triton to Jupiter Serial Control Kit
Product part no. 44–050456–001
Installation Instructions
Docum ent Part Num ber 04–051254–001 Rev C
March 7, 2003
applicability
purpose
All Triton switchers controlled by a Jupiter Control System.
These instructions describe installation of the B&B Electronics RS–232 to RS–422 Converter
supplied with this kit.
m aterials required
Kit, VM 3000 To Triton Control
44–050456–001
DESCRIPTION
PART NUMBER
06–050454–001
QTY
B&B Elect. 422COR RS–232/422 Converter
1
1
1
1
1
B&B Electronics BB–33 Universal Power Supply 06–050455–001
VM 3000 to Converter Cable, 25 ft. (7.6 m)
Converter to Triton Cable, 25 ft. (7.6 m)
Installation Instructions
01–050452–001
01–050453–001
04–051254–001
Other items required:
Volt/ohmmeter — not supplied in kit
AC line plug adapter (for installations outside North America) — not supplied in kit
procedure
1. Set the AC voltage switch on the Universal Power Supply to the correct voltage for your
country (110 V or 220 V).
Note: The default setting is 110 V.
2. Set the Polarity switch on the Universal Power Supply to the positive position.
3. Set the DC voltage switch on the Universal Power Supply to the 12 volt position.
3
10. Connect the Universal Power Supply to AC power.
Note 1: A plug adapter may be required for use outside of North America.
Note 2: In redundant VM installations, remeasure the converter power supply out-
put to be sure it is at 12 volts. This is necessary because of the increased cable load-
ing.
11. The Triton hardware connection is now complete. The Jupiter configuration tables must
be modified to include the Triton switcher. Refer to the Jupiter Facility Control System
Installation and Operating manual, part number 04–045707–002, for information on
configuration for control of Triton switchers.
to RS–422/232
converter
to VM 3000
serial port
to Triton
RS–232 Port
1
1
1
2
1
G
G
G
6
6
14
15
14
15
T+
2
2
3
2
Tx
R–
Rx
Tx
T–
7
7
R+
3
3
3
T+
8
Rx
8
16
16
T–
4
4
4
4
9
9
17
18
17
18
R+
5
5
5
5
G
R–
6
6
19
19
DB9P
(male)
DB9P
(male)
7
7
20
21
22
23
20
21
22
23
8
8
G
Ground
Rx Receive
Tx Transmit
= twisted pair
Ground
R– Receive minus
R+ Receive plus
9
9
G
10
11
10
11
T+
T–
Transmit plus
Transmit minus
Figure 2. Cables for connecting
VM 3000, Converter, and Triton.
24
25
24
25
12
13
12
13
DB25S
(female)
DB25P
(male)
© 2003 Thom son Broadcast & Media Solutions, Inc. All rights reserved. All specifications subject to change without notice. GV and
Grass Valley are trademarks of Thomson. For customer service, please call (800) 547–8949. For comments or questions concerning this docu-
ment, contact: Technical Publications Department, P.O. Box 30816, Salt Lake City, Utah 84130. Phone: (801) 972–8000. Email: SLCtech-
pubs@thmulti.com
|