MARINE
Marine Speaker Owner’s Manual MS610 MS620 MS920
Installation JBL Marine Speakers
Specifications JBL Marine Speakers
Figure 1. Mounting the JBL MS620 marine speaker. The JBL MS920
and MS610 marine speakers (not shown) mount in a similar way.
MS610
Type
6-1/2" dual-cone
4 ohms
35W RMS, 105W Peak
90dB
55Hz – 18kHz
2-3/8" (61mm)
5" (127mm)
Speaker Impedance
Power Handling
Sensitivity (2.83V, 1m)
Frequency Response
Mounting Depth
Cut-Out Diameter
MS620
Type
6-1/2" 2-way
4 ohms
60W RMS, 180W Peak
91dB
55Hz – 20kHz
2-3/8" (61mm)
5" (127mm)
Speaker Impedance
Power Handling
Sensitivity (2.83V, 1m)
Frequency Response
Mounting Depth
Cut-Out Diameter
MS920
Type
6" x 9" 2-way
Speaker Impedance
Power Handling
Sensitivity (2.83V, 1m)
Frequency Response
Mounting Depth
Cut-Out Diameter
4 ohms
100W RMS, 300W Peak
91dB
50Hz – 21kHz
3-1/8" (80mm)
6" x 8-13/16" (153mm x 224mm)
03
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
JBL Consumer Products • 250 Crossways Park Drive, Woodbury, NY 11797 USA
declare in own responsibility that the products described in this owner’s
manual are in compliance with technical standards:
EN 61000-6-3:2001
©2003 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International Industries, Incorporated
EN 61000-6-1:2001
Emmanuel Millot
Harman Consumer International
Chateau-du-Loir, France 11/03
Part No. MS610/620/920OM 11/03
®
|