SolaraVentilatorTray Option
Assembly,Installation and Operating Instructions
INSTALLATION WARNINGS
SAVE THESE INSTRUCTIONS
Afte r ANY a d justm e nts, re p a ir or se rvic e a nd
BEFORE use , m a ke sure tha t a ll a tta c hing
ha rd wa re is tig hte ne d se c ure ly.
NOTE: Check all parts for shipping damage. In case of
damage, DO NOT use. Contact Carrier/Invacare for fur-
ther instructions.
SAFETY SUMMARY
INSTALLING THE VENTILATOR
TRAY (FIGURE 1)
The following recommendations are made for the safe
and proper installation and use of the Ventilator Tray:
NOTE: Refer to the following diagram for the proper loca-
tion of the ventilator tray attachment points.
GENERAL WARNINGS
DO NOT insta ll this e q uip m e nt witho ut first
re a d ing a nd und e rsta nd ing this instruc tion
she e t. If you a re una b le to und e rsta nd the
Wa rning s, Ca utions a nd Instruc tions, c onta c t
a he a lthc a re p rofe ssiona l, d e a le r or te c hni-
c a l p e rsonne l if a p p lic a b le , b e fore a tte m p t-
ing to insta ll this e q uip m e nt - othe rwise , in-
jury or d a m a g e m a y oc c ur.
1. Attach the ventilator tray components in the following
order:
A. Install the ventilator tray hanger bracket onto the
ventilator tray.
B. Install the ventilator brace onto the chair frame.
C. Install the ventilator tray onto the chair frame.
D. Install the ventilator arms onto the ventilator tray/
chair frame.
D. Refer to INSTALLING THE
VENTILATOR ARMS ONTO THE
VENTILATOR TRAY/CHAIR
B. Refer to INSTALLING THE
VENTILATOR BRACE ONTO
THE CHAIR FRAME in this
Instruction Sheet.
FRAME in this Instruction Sheet.
Ventilator Tray
Chair Frame
A. Refer to INSTALLING THE
VENTILATOR TRAY HANGER
BRACKET ONTO THE VENTILATOR
TRAY in this Instruction Sheet.
C. Refer to INSTALLING THE
VENTILATOR TRAY ONTO THE
CHAIR FRAME in this Instruction
Sheet.
FIGURE 1 - INSTALLING THE VENTILATOR TRAY/ATTACHMENT POINT LOCATIONS
1
Chair Frame
Upper Brace
Ventilator Tray
Tube Clamp (STEP 1)
Lower
Brace
5/16-24x1-1/2-inch
Hex Head Screw
(STEP 4)
Self Locking
Nut (STEP 6)
Middle Brace
Rear
Front
Middle Mounting
Hole (STEP 3)
Ventilator Brace
(STEP 5)
Mounting Hole
(STEP 3)
Clamp Saddle
(STEP 5)
Self Locking Nut
(STEP 4)
Tube Clamp (STEP 1)
Ventilator Tray Hanger Bracket (STEP 5)
Mounting Holes
(STEP 5)
1/4-20x1-1/2-inch Button
Head Screws (STEP 6)
NOTE: The ventilator tray hanger bracket and the venti-
lator brace are shown unattached for clarity.
FIGURE 4 - INSTALLING THE VENTILATOR TRAY ONTO THE CHAIR FRAME
Chair Frame
Installing The Ventilator Arm s Onto The
Ventilator Tray/ Chair Fram e (FIGURE 5)
5/16-24x1-1/2-inch Button
Head Screws
1. Position one (1) ventilator tray arm on the UPPER
brace of the chair frame by firmly grasping the tube
clamp on the top of the ventilator tray arm and bend-
ing it around the UPPER brace of the chair frame.
Tube Clamp
Upper Brace
2. Secure the tube clamp on the ventilator tray arm to
the UPPER brace of the chair frame using one (1)
5/16 - 24 x 1-1/2-inch hex cap screw and self locking
nut. Hand tighten ONLY.
Ventilator Tray Arms
Self
Locking
Nut
3. Position the LOWER end of the ventilator tray arm
UNDER the ventilator tray, making sure the two (2)
mounting holes in the LOWER end of the ventilator
tray arm align with the two (2) mounting holes in the
REAR of the ventilator tray.
Rear
1/4-20x1/2-inch
Button Head
Screws
4. Secure the ventilator tray arm to the ventilator tray
using two (2) 1/4 - 20 x 1/2-inch button head screws
and self locking nuts. Hand tighten ONLY.
Mounting Holes
Self
Locking Nuts
5. Repeat STEPS 1 - 4 for the other vent tray arm.
Ventilator Tray
6. Securely tighten ALL attaching hardware on the
ventilaor tray.
FIGURE 5 - INSTALLING THE VENTILATOR ARMS
ONTO THE VENTILATOR TRAY/CHAIR FRAME
3
DETAIL “J”
Strap
DETAIL “K”
Strap
USING THE VENTILATOR TRAY
(FIGURE 6)
NOTE: The ventilator tray straps are positioned on the
ventilator tray BEFORE the ventilator tray is shipped.
Rear
Slide
Portion
of Buckle
1. Position all six (6) strap slides on the outside of the
ventilator tray.
2. Position the ventilator battery in the front portion of
the ventilator tray.
See Detail “J”
See Detail “K”
Rear Portion
of Ventilator
Tray
3. Secure the two (2) straps around the top of the ven-
tilator battery and clip together.
Ventilator
Battery
4. Position the ventilator in the rear portion of the venti-
lator tray.
Buckle
5. Secure the four (4) straps around the top of the ven-
tilator and clip together.
Slide
6. Adjust the slides, located in the middle of each strap,
up or down to increase or decrease length. See DE-
TAIL “J”.
Ventilator
Tray
7. Securely tighten the straps around the battery and
ventilator by pulling the ends of the straps through
the rear portion of each buckle DETAIL “K”.
Front Portion
of Ventilator
Tray
FIGURE 6 - USING THE VENTILATOR TRAY
Invacare Corporation
Technical Support
800-832-4707
One InvacareWay
Elyria, Ohio USA
44036-2125
Invacare and“Yes,you can” are trademarks of Invacare
Corporation.
©
2000 Invacare Corporation
Form No. 99-203 Part No. 1093582 Rev B (1) 03/00
800-333-6900
|