You're only minutes away from the best network security available.
Welcome
Model GX5108
3 Serial Console Port
1 LCD Controller Module
4 USB Ports
2 Protected Ports
Used for terminal-based (optional)
setup and recovery
Used for initial network configuration,
restarting or shutting down the appliance
and obtaining IPS version information
Used for either inline intrusion prevention (IPS mode) or passive intrusion
detection (IDS mode)
Used to communicate with optional external bypass unit
Inline prevention uses a pair of ports per segment
Passive detection uses a single port per segment
5 Management Ports
Management port 1 is used
to communicate with Proventia
Manager and Proventia
IDE
PWR
SiteProtector™ central
management system
Management port 2 is used
exclusively for sending RSKill
(TCP Reset) responses
1
2
6 Power Supplies
7 Power Button
8 Fan Assemblies
Technical Support - http://www.iss.net/support
|