Wireless
150N
4-Port
router
INT-524445-QIG-0908-04
4. Check all LEDs on the front panel. The PWR LED should be on, and
the WAN and LAN LEDs should be on if the computer or network
device connected to the corresponding router port(s) are powered on
and correctly connected.
5. Connect your computer to one of the LAN ports of the router, then
activate the network connection. Start the Web browser — e.g., MS
Internet Explorer — and open
login window.
6. Enter “admin” for username
and “1234” for password.
Additional install instructions —
as well as explanations for all
the setup options — can be
found in the user manual on the
enclosed CD.
Safety Guidelines
•
•
•
Do not place this router outdoors or near excessive heat or humidity.
Do not yank any connected cables; disconnect them gently.
If placing this device at heights or on a wall, make sure it’s firmly
secured to prevent damage or possible injury.
•
•
•
Router parts (antenna, power supply, etc.) are dangerous should children
put them in their nose or mouth. Keep out of the reach of children!
It’s normal for the router to become hot when used a long time, so keep
the router away from paper, cloth and other flammable materials.
There’s no user-serviceable part inside the router. If you find that the
router is not working properly, contact your dealer (place of purchase)
and ask for help. Do not disassemble the router: Doing so will void
the warranty.
•
•
If the router falls into water while turned on, Do not touch it to remove
it! Turn off its power source before you do anything, or contact an
experienced technician for help.
If smoke or strange odors emanaye from the router or power supply,
remove the power supply or turn the power off immediately.
3
INTellINeT NeTWoRK SolUTIoNS™ offers a complete line
of active and passive networking products.
Ask your local computer dealer for more information or visit
www.intellinet-network.com.
Copyright © INTELLINET NETWORK SOLUTIONS
All products mentioned are trademarks or registered trademarks of their respective owners.
|