TM
MICROSTEPPING
DESCRIPTION
FEATURES
connections are accomplished us-
ing either a 1 2 position keyed and
locking pin and receptacle (C Con-
nector), a 7 position terminal strip,
or 1 2 .0 " (3 0 .5 cm) flying leads.
The MDrive NEMA 2 3 high torque
Inte gr a te d Motor a nd Dr ive r is
ideal for designers who want the
simplicity of a motor with on-board
e le ctronics , but without the e x-
pense of an indexer on each axis.
The low cost MDrive2 3 allows the
system designer to decide the best
method of control. The MDrive2 3 ’s
inte gra te d e le ctronics e lim ina te
the need to run the motor cabling
through the machine, reducing the
potential for problems due to elec-
trical noise.
• Integrated Microstepping Driver
and NEMA 2 3 High Torque 1 .8 °
Stepping Motor
• Input Voltage:
+1 2 to +4 8 VDC (MDrive2 3 -4 )
+2 4 to +7 5 VDC (MDrive2 3 -7 )
The MDrive2 3 is a compact, pow-
erful and inexpensive solution that
will reduce system cost, design and
assembly time for a large range of
stepping motor applications.
• Low Cost
• Extremely Compact
• Optically Isolated Logic Inputs
will Accept +5 to +2 4 VDC
Signals, Sourcing or Sinking
†
CONFIGURING
• Automatic Current Reduction
The IMS Motor Interface software
is an easy to install and use GUI
for configuring the MDrive2 3 from
a computer parallel/ SPI port. GUI
acces s is via the IMS SPI Inter-
face included on the CD s hipped
with the product, or download at
www.imshome.com. Optional cables
are available for ease of connecting
and configuring the MDrive.
• Configurable:
- Motor Run/ Hold Current
- Motor Direction vs. Direction
Input
- Microstep Resolution to 2 5 6
Microsteps/ Full Step
• Available Configurations:
- Single Shaft*
- Long Life Linear Actuator
- Optical Encoder*
- Control Knob for Manual
Positioning*
- Integrated Planetary Gearbox*
The MDrive2 3 uses a NEMA 2 3
frame size 1 .8 ° high torque step-
ping motor combined with a mic-
rostepping driver, and accepts up
to 1 4 resolution settings from ½
to 2 5 6 micros teps per full s tep.
Setup parameters include Micro-
step Resolution, Motor Run/ Hold
Current, and Motor Direction with
r e s pe c t to the dir e c tion input.
Thes e s ettings m ay be changed
o n -t h e -fly o r d o wn lo a d e d a n d
stored in nonvolatile memory with
the use of a simple GUI which is
provided. This eliminates the need
for external switches or resistors.
Pa ra m eters a re cha nged via a n
SPI port. Operating voltage for the
MDrive2 3 ranges from +1 2 to +4 8
VDC or +2 4 to +7 5 VDC.
The IMS Motor Interface features:
• Easy installation.
• Automatic detection of MDrive
version and communication
configuration.
• W ill not set out-of-range values.
• Tool-tips display valid range
setting for each option.
• Three Stack Sizes Available*
• Current and Resolution May Be
Switched On-The-Fly
• Single Supply
• Single screen interface (below).
• Interface Options:
- Keyed and Locking Pin and
Receptacle (C Connector)
The versatile, compact MDrive2 3 is
available in multiple configurations
to fit various system needs. These
include a s ingle s haft rotary mo-
tor, a dua l s ha ft r ota r y m otor
available with optical encoder or
control knob, a planetary gearbox,
or a long life Acme s crew linear
actuator. The rotary MDrive2 3 is
available in single, double and triple
stack sizes: 1 8 , 2 2 & 3 1 . Interface
- Pluggable Terminal Strip
- 1 2 .0 " (3 0 .5 cm) Flying Leads
• Graphical User Interface (GUI)
for Quick and Easy Parameter
Setup
*
†
Rotary Motor Only
The IMS Motor Interface GUI simplifies MDrive
configuring with a single screen interface.
(DIR feature with C Connector version only.)
C Connector Version Only. Other
Versions Require 5 Volt Sinking Outputs.
MDrive2 3 Microstepping Datasheet REV1 2 1 7 0 4
1
MDRIVE2 3 MOTOR SPECIFICATIONS
MD2 2 1 8 Single Stack
MD2 2 3 1 Triple Stack
Holding Torque ........................ 9 0 oz-in / 6 4 N-cm
Detent Torque ....................... 3 .9 oz-in / 2 .7 N-cm
Rotor Inertia ........ 0 .0 0 2 5 oz-in-sec2 / 0 .1 8 kg-cm2
Weight (Motor+Driver)............... 2 0 .1 oz / 5 6 9 .8 g
Holding Torque ..................... 2 3 9 oz-in / 1 6 9 N-cm
Detent Torque ...................... 9 .7 oz-in / 6 .8 6 N-cm
Rotor Inertia ..........0 .0 0 6 5 oz-in-sec2 / 0 .4 6 kg-cm2
Weight (Motor+Driver)............. 3 8 .5 oz / 1 0 9 1 .5 g
MD2 2 2 2 Double Stack
MD2 2 1 8 Linear Actuator
Holding Torque .................... 1 4 4 oz-in / 1 0 2 N-cm
Detent Torque ..................... 5 .6 oz-in / 3 .9 2 N-cm
Rotor Inertia ........ 0 .0 0 3 7 oz-in-sec2 / 0 .2 6 kg-cm2
Weight (Motor+Driver)............... 2 4 .4 oz / 6 9 1 .7 g
Maximum Thrust ......................... 2 0 0 lbs / 8 9 0 N
Maximum Screw Deflection ............................. ± 1 °
Backlash ............................ 0 .0 0 5 in / 0 .1 2 7 mm
Weight (without screw).............. 2 0 .4 oz / 5 7 8 .3 g
TORQUE-SPEED CURVES
Rotary Motor
FORCE-SPEED CURVES
Linear Actuator
MD2 2 1 8 Single Stack
2 4 VDC
Load Limit 200lbs / 890N
24 VDC
45 VDC
75 VDC
890
200
180
160
70
60
50
40
30
20
10
0
49
42
35
28
21
14
7
801
712
Screw F
Screw E
Screw D
Screw C
Screw B
Screw A
623
534
445
356
267
178
89
140
120
100
80
60
40
0
1000
2000
3000
4000
5000
6000
7000
20
Speed in Full Steps per Second
0
0
1000
2000
3000
4000
5000
6000
7000
Speed in Full Steps per Second
MD2 2 2 2 Double Stack
4 5 VDC
Load Limit 200lbs / 890N
24 VDC
45 VDC
75 VDC
890
99
85
71
56
42
28
14
200
180
160
140
120
100
80
801
712
Screw F
Screw E
Screw D
Screw C
Screw B
Screw A
623
534
445
356
267
178
89
140
120
100
80
60
40
20
60
0
40
0
1000
2000
3000
4000
5000
6000
7000
20
Speed in Full Steps per Second
0
0
1000
2000
3000
4000
5000
6000
7000
Speed in Full Steps per Second
MD2 2 3 1 Triple Stack
7 5 VDC
Load Limit 200lbs / 890N
24 VDC
45 VDC
75 VDC
890
200
180
160
225
200
159
141
Screw F
Screw E
801
712
Screw D
Screw C
Screw B
Screw A
124
106
88
175
150
125
100
75
623
534
445
356
267
178
89
140
120
100
80
71
53
60
35
50
40
20
18
25
0
0
0
1000
2000
3000
4000
5000
6000
7000
0
1000
2000
3000
4000
5000
6000
7000
Speed in Full Steps per Second
Speed in Full Steps per Second
MDrive2 3 Microstepping Datasheet REV1 2 1 7 0 4
3
MDRIVE2 3 W ITH PLANETARY GEARBOX
The MDrive2 3 is available with a Planetary Gearbox reduction ratios in 1 -, 2 - and 3 -stage configurations.
option developed to increase torque at lower speeds, An optional NEMA Flange allows mounting the Plan-
enable better inertia matching and produce finer etary Gearbox to the load using a standard NEMA
positional resolutions. These efficient, low mainte- bolt circle. Planetary Gearbox may be combined with
nance Planetary Gearbox come fully assembled with other MDrive2 3 options, however are unavailable on
the MDrive and are offered in a large number of Linear Actuator versions.
Parameters
1 -Stage
2 -Stage
3 -Stage
Permitted Output Torque (oz-in/ Nm)........................... 5 6 6 / 4 .0 ............1 6 9 9 / 1 2 .0 .........3 5 4 0 / 2 5 .0
Gearbox Efficiency....................................................... 0 .8 0 ....................0 .7 5 ...................0 .7 0
Maximum Backlash (degree)........................................ 0 .7 0 °................... 0 .7 5 °.................. 0 .8 0 °
Ouput Side with Ball Bearing
Maximum Load, Radial (lb-force/ N) ............................ 4 5 / 2 0 0 ............... 7 2 / 3 2 0 ............. 1 0 1 / 4 5 0
Maximum Load, Axial (lb-force/ N) ............................... 1 3 / 6 0 ................ 2 2 / 1 0 0 .............. 3 4 / 1 5 0
Weight - Gearbox Only (oz/ g).................................... 2 5 .0 / 7 1 1 ............3 2 .2 / 9 1 4 ..........3 9 .4 / 1 1 1 7
Weight - Gearbox & NEMA Flange (oz/ g) ................... 2 5 .9 / 7 3 5 ............3 3 .3 / 9 4 5 ..........4 0 .7 / 1 1 5 5
PLANETARY GEARBOX MECHANICAL SPECIFICATIONS
Dimensions in Inches (mm)
Gearbox Ratios (Rounded)
1 -Stage
3 .7 0 :1
5 .1 8 :1
6 .7 5 :1
2 -Stage
1 3 .7 3 :1
1 5 .8 8 :1
1 8 .3 6 :1
1 9 .2 0 :1
2 2 .2 0 :1
2 5 .0 1 :1
2 6 .8 5 :1
2 8 .9 3 :1
3 -Stage
5 0 .8 9 :1
5 8 .8 5 :1
6 8 .0 6 :1
7 1 .1 6 :1
7 8 .7 1 :1
9 2 .7 0 :1
9 5 .1 7 :1
9 9 .5 0 :1
Planetary Gearbox for MDrive2 3
0.984
(25.0)
k1 0.02 ( 0.5)
M5 x 0.394 (10.0) Deep
0.106
(2.7)
3 4 .9 7 :1 1 0 7 .2 0 :1
4 5 .5 6 :1 1 1 5 .0 7 :1
1 2 3 .9 7 :1
1 2 9 .6 2 :1
1 3 9 .1 3 :1
1 4 9 .9 0 :1
1 6 8 .8 4 :1
1 8 1 .2 4 :1
1 9 5 .2 6 :1
2 3 6 .0 9 :1
3 0 7 .5 4 :1
Ctrg. DIN 332-D M4x10
Key DIN 6885-A-4x4x16mm
Ø 1.575
(Ø 40.0)
Gearbox Lengths Inches (mm)
1 -Stage
2 -Stage
3 -Stage
4 .3 1 5
(1 0 9 .6 )
5 .1 6 9
(1 3 1 .3 )
6 .0 2 4
(1 5 3 .0 )
k1 Gearbox
k2 Gearbox w/
NEMA Flange
4 .4 3 3
(1 1 2 .6 )
5 .2 8 7
(1 3 4 .3 )
6 .1 4 2
(1 5 6 .0 )
Planetary Gearbox with Optional NEMA Output Flange
0.925
(23.5)
k2 0.02 ( 0.5)
4x Ø 0.197 (Ø 5) Hole
0.06
(1.5)
Ctrg. DIN 332-D M4x10
1.854
(47.1)
0.236
(6.0)
Key DIN 6885-A-4x4x16mm
2.22 SQ.
(56.4 SQ.)
MDrive2 3 Microstepping Datasheet REV1 2 1 7 0 4
4
MDRIVE2 3 MICROSTEPPING – MECHANICAL SPECIFICATIONS
Dimensions in Inches (mm)
Rotary MDrive2 3 : Single Shaft, Control Knob & Encoder Vers ions
1.63
(41.4)
1.50
(38.1)
Interface
Option
0.81 0.02
(20.6 0.5)
P1
4X Ø 0.197
(Ø 5.0)
0.06
(1.6)
0.59 0.008
(15.0 0.2)
0.23 0.004
(5.8 0.1)
2.92
(74.2)
P2
1.856 0.008 SQ.
(47.14 0.2 SQ.)
Ø 0.250 +0/-0.0005
(Ø 6.35 +0/-0.013)
0.19
(4.8)
Ø 1.500 0.002
(Ø 38.10 0.05)
2.22 SQ.
L
MAX
(56.4 SQ.)
L
MAX2
MDrive Lengths Inches (mm)
Interface Options
L
L
MAX2
MAX
0.44
(11.2)
CONTROL KNOB or
ENCODER VERSION
SINGLE SHAFT
VERSION
12.00
+1.0/-0.0
0.36
(9.1)
Stack Size
2 2 1 8
2 2 2 2
(304.8)
(+25.4/-0.0)
2 .6 3 (6 6 .8 )
3 .0 0 (7 6 .2 )
3 .8 6 (9 8 .0 )
3 .3 5 (8 5 .1 )
3 .7 0 (9 4 .0 )
4 .5 7 (1 1 6 .1 )
2 2 3 1
Pluggable Clamp
Type Terminal Strip
1.17
(29.7)
L
Options
Flying Leads
C Connector
MAX2
1.20
(30.4)
Differential
Adapter
3.00
(76.2)
1.90
(48.3)
Ø 0.97
(Ø 24.6)
2.22
(56.4)
1.42
(36.1)
.
1 0 0 - 1 0 0 0 Line Encoders
2 0 0 0 Line Encoder
Control Knob
Linear Actuator MDrive2 3
6.00
(152.4)
1.63
(41.4)
1.50
(38.1)
Interface
Option
P1
4X Ø 0.205
(Ø 5.21)
0.06
(1.6)
0.375
(9.52)
0.50
(12.7)
2.92
(74.2)
P2
1.856 0.008 SQ.
(47.14 0.2 SQ.)
1/4-20 UNC-2A
THREAD TO
WITHIN 0.05 (1.3)
OF SHOULDER
Ø 1.500 0.002
(Ø 38.10 0.05)
2.64
(67.1)
2.22 SQ.
(56.4 SQ.)
MDrive2 3 Microstepping Datasheet REV1 2 1 7 0 4
5
Screw C ............... 0 .0 0 0 5 ”/ full step
Screw D ............... 0 .0 0 0 4 1 6 7 ”/ full step
MDRIVE2 3 MICROSTEPPING – OPTIONS
Screw E. ............... 0 .0 0 0 3 1 2 5 ”/ full step
Control Knob
Standard screw length is 6 .0 ” (1 5 2 .4 mm) plus the
mounting end thread. Custom lengths from 2 .0 ” to
2 4 .0 ” are available without mounting end thread.
Linear Actuators are Non-Captive style. Contact the
factory regarding Captive Shaft or External styles.
The MDrive2 3 is available with a factory-mounted rear
control knob for manual shaft positioning.
Planetary Gearbox
Efficient, low maintenance Planetary Gearbox are of-
fered assembled with the MDrive2 3 . Details inside.
Parameter Setup Cable and Adapter
The optional 6 ' (1 .8 m) Parameter Setup Cable Part
No. MD-CC1 0 0 -0 0 0 eliminates the need to wire com-
munications and is recommended with first order. It
connects an MDrive's 1 0 pin pin-header (P2 ) to a
standard DB-2 5 PC Parallel/ SPI port and includes
built-in logic level shifting circuity to accommodate the
3 .3 v ports on some PCs. In addition, MDrives with
C Connector require an Adapter Part No. MD-ADP-
1 7 2 3 C to mate the Cable to the 1 2 position pin and
receptacle connector (P1 ).
Encoder
The MDrive2 3 is available with a factory-mounted
optical encoder. Available line counts are 1 0 0 , 2 0 0 ,
2 5 0 , 4 0 0 , 5 0 0 , 1 0 0 0 or 2 0 0 0 . All encoders, except
1 0 0 0 line, have an index mark. Encoders are avail-
able in both single-end and differential configurations.
Order optional Encoder Cables separately:
Single-end Cable (1 2 "/ 3 0 .5 cm) ... ES-CABLE-2 *
Differential Cable (3 6 "/ 9 1 .5 cm)... ED-CABLE-2 *
* Change "2 " to a "6 " when ordering 2 0 0 0 line encoder cable.
Prototype Development Cable
Linear Actuator
For testing and development of MDrives with C Con-
nector, the 1 2 " (3 0 .5 cm) Prototype Development
Cable plugs into the MD-ADP-1 7 2 3 C Adapter and
has flying leads for connection to the user interface.
Part No. ADP-3 5 1 2 -FL.
The MDrive2 3 with long life Acme Screw Linear Ac-
tuator is available with the following travel/ full step:
Screw F ............... 0 .0 0 2 ”/ full step
Screw A ............... 0 .0 0 1 ”/ full step
Screw B. .............. 0 .0 0 0 8 3 3 3 ”/ full step
ORDER INFORMATION
MDRIVE2 3 MICROSTEPPING
OPTIONS
Example #2: MDMC2222-4N
Adds a Control Knob
to the part shown in example #1.
Control
Knob
N
Stack Sizes
18†= Single Stack & Linear Actuator
22 = Double Stack
31 = Triple Stack
Example #3: MDMC2222-4G5
Rounding ratio to the nearest whole number,
the above adds a Planetary Gearbox with
Planetary
Gearbox
G
Gearbox Ratio
5.18:1 ratio to the part shown in example #1.
Rounded to Nearest Whole Number
Add -F if optional NEMA Flange is desired.
OPTION
Example #4: MDMC2222-4ED500
Adds a 500 line count Differential Encoder
to the part shown in example #1.
MDM
22
–
Encoder
E
S = Single End
D = Differential
Line Count: 100, 200, 250,
400, 500, 1000, 2000
Interface Options
Input Voltage
C = Pin & Receptacle*
F = 12" Flying Leads
P = Pluggable Clamp
Type Terminal Strip
4 = 48 VDC
7 = 75 VDC*
Example #5: MDMC2218-4LB10.5
MDrive23 Microstepping Linear Actuator
with a 0.0008333”/Full Step Acme
Screw custom cut to 10.5”.
Linear
Actuator
Screw Type (Travel/Full Step)
F = 0.002”
A = 0.001”
†
L
Custom Screw Length
Range 2.0” to 24.0”
Format XX.X
MAY NOT be combined with other options.
Example #1: Part Number MDMC2222-4 is an MDrive23
Microstepping with C Connector, NEMA 22 motor, stack size 22
and +12 to +48 VDC input voltage range.
B = 0.0008333”
C = 0.0005”
D = 0.0004167”
E = 0.0003125”
Note: MDrive23 Linear Actuator
Available ONLY in Stack Size 18
eg. 08.5 for an 8.5” Screw
(6.0” Screw Length Standard)
†Linear Actuator Available ONLY in Stack Size 18. (MDMX2218LX)
*MDrive 75 Volt version NOT Available with C Connector Interface Option.
TECHNICAL SUPPORT
IMS EUROPE GmbH
Eas tern U.S.
Hahnstrasse 1 0 , VS-Schwenningen
Germany D-7 8 0 5 4
Phone: 8 6 0 / 2 9 5 -6 1 0 2
Fax: 8 6 0 / 2 9 5 -6 1 0 7
E-mail: etech@imshome.com
Wes tern U.S.
Phone: 7 6 0 / 9 6 6 -3 1 6 2
Fax: 7 6 0 / 9 6 6 -3 1 6 5
E-mail: wtech@imshome.com
Phone: +4 9 / 7 7 2 0 / 9 4 1 3 8 -0
Fax: +4 9 / 7 7 2 0 / 9 4 1 3 8 -2
E-mail: info@imseuropehome.com
European Sales Management
4 Quai Des Etroits
P.O. Box 4 5 7 , 3 7 0 N. Main Street
Marlborough, CT 0 6 4 4 7 U.S.A.
Phone: 8 6 0 / 2 9 5 -6 1 0 2
Fax: 8 6 0 / 2 9 5 -6 1 0 7
E-mail: info@ims home.com
Home Page: www.ims home.com
6 9 0 0 5 Lyon, France
Phone: +3 3 / 4 7 2 5 6 5 1 1 3
Fax: +3 3 / 4 7 8 3 8 1 5 3 7
IMS MOTORS DIVISION
1 0 5 Copperwood Way, Suite H
Oceanside, CA 9 2 0 5 4
Phone: 7 6 0 / 9 6 6 -3 1 6 2
Fax: 7 6 0 / 9 6 6 -3 1 6 5
E-mail: bmartinez@imshome.com
German Sales / Technical Support
Phone: +4 9 / 3 5 2 0 5 / 4 5 8 7 -8
Fax: +4 9 / 3 5 2 0 5 / 4 5 8 7 -9
E-mail: hruhland@imshome.com
Distributed By:
E-mail: motors@imshome.com
Product information covered by IMS Product Disclaimer available at www.imshome.com.
Visit the IMS web site for the most up-to-date product information.
© 2 0 0 2 , 2 0 0 4 Intelligent Motion Systems, Inc. All Rights Reserved.
REV1 2 1 7 0 4
|
Indesit Washer iwd 6125 User Manual
Init TV Video Accessories 09 0587 User Manual
Insignia TV Mount NS HZ311 User Manual
Intel Webcam 140T User Manual
Kaz Humidifier v1300 User Manual
Kenwood Stereo Receiver KT 8300 User Manual
Kidde Carbon Monoxide Alarm KN COSM B User Manual
Kodak Camcorder C310 User Manual
Kolcraft Crib B13 R7 1 04 User Manual
Koss Stereo System ESP 950 User Manual