User Guide
Car HD Radio CD Deck with USB Port
NS-HD5113
Insignia NS-HD5113
Car HD Radio CD Deck with USB Port
• Replacement parts—When replacement parts
Welcome
are required, make sure that the service
technician uses replacement parts specified by
the manufacturer that have the same
Congratulations on your purchase of a high-quality
Insignia product. Your NS-HD5113 represents the
state of the art in car HD radio CD decks and is
designed for reliable and trouble-free performance.
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
injury to persons, or other hazards.
• Safety check—Upon completion of any service
or repairs to your car HD radio CD deck, ask the
service technician to perform routine safety
checks to determine that your car HD radio CD
deck is in correct operating condition.
• Connections—Make sure that you connect the
color-coded leads according to the diagram.
Incorrect connections may cause the unit to
malfunction or damage the vehicle’s electrical
system.
Safety information
Warning
This car HD radio CD deck is a class 1 laser product. To
prevent direct exposure to the laser system, do not
open the unit. The laser beam may hurt your eyes. If
the deck requires adjustments, contact an authorized
service center.
Make sure that you connect the speaker (-) leads
to the speaker (-) terminal. Never connect the left
and right channel speaker cables to each other or
to the vehicle body.
Make sure that all the connections are completely
correct before turning on your unit.
Caution
Any change or modification to your car HD radio CD
deck not expressly approved by the manufacturer or
its authorized parties could void your authority to
operate your unit.
Important safeguards
• Fuses—When replacing the fuse(s), the
replacement must be of the same amperage as
shown on the fuse holder.
• Read instructions—Read all the safety and
operating instructions before operating your car
HD radio CD deck.
Warning
Never replace any fuse with one of a higher value
than the fuse supplied with your unit. Using a higher
rated fuse may cause damage to your unit and/or
electrical wiring.
• Retain instructions—Retain the safety and
operating instructions for future reference.
• Follow warnings—Follow all warnings on your
car HD radio CD deck and in the operating
instructions.
• Follow instructions—Follow all operating and
use instructions.
• When driving—Keep the sound level of your car
HD radio CD deck at an appropriate level. Driving
with the volume at a high level could prevent you
from hearing sounds outside and around the car,
which could cause an accident. Stop the car
before doing anything that could interfere with
your driving.
• Heat—Do not block vents or radiator panels.
Blocking them will cause heat to build up inside
and may result in fire. Do not operate the car HD
radio CD deck in extremely high or low
temperatures. Make sure that the temperature
inside the car is between 140°F (+60°C) and 14°F
(-10°C) before turning on your unit.
Caution
Do not use and store the car HD radio CD deck in a
dusty, hot, or humid environment.
• When parked—Parking in direct sunlight can
result in very high temperature levels inside your
car. Let the interior, and your car HD radio CD
deck, cool down before switching the car HD
radio CD deck on.
• Cleaning—Do not expose your car HD radio CD
deck to water or excessive moisture. This could
cause a short circuit, a fire, or other severe
damage. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
• Servicing or modifying—Do not attempt to
service your car HD radio CD deck yourself,
because opening or removing covers may expose
you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel. Do not
attempt to modify the unit, because modifying
the unit may cause an accident.
1
NS-HD5113 Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
Item
Description
Main wire harness (1)
Features
Parts list
Item
Description
Mounting sleeve (1)
Outer trim frame (1)
User Guide (1)
Back strap (1)
M 5×5 screws (4)
Keys (2)
Rubber grommet for wire harness (1)
Rear mounting bolt (1)
Front panel and base unit
1
6
2
3
5
4
15
7
10
14 13
16
12
9 8
11
18
17
2
Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
#
Description
Function
1
Press to turn the car HD radio CD deck on. Press again to turn it off.
(power) button
2
3
4
5
6
7
8
9
EQ/iTAG button
Infrared sensor
LCD panel
Press briefly to select the equalization preset mode. Press and hold to iTag a selection on the radio.
Receives the signal from the remote control to control the CD deck.
Shows the current status of the CD deck.
HD button
Press to turn HD radio feature on or off.
REL (release) button
USB port
Press to release the front panel to insert or remove a CD or to remove the front panel from the head unit.
Insert a USB device into this port.
AUX In port
Plug an external audio source into the 3.5 mm port.
DISP button
Press to display the time. Press and hold DISP until the two dots in the middle of the clock stop blinking.
Press Volume up to adjust the hours, and Volume down to adjust the minutes. See “Setting the time” on page 7.
10 Preset buttons (radio)
Playback controls (CD)
In radio mode, press to access station presets in each band.
In CD playback mode, press the following:
•
•
•
•
•
•
1/
(play/pause)
2/INT (introduction)
3/RPT (repeat)
4/RDM (random)
5/DN (down)
6/UP (up)
11 MODE button
12 BAND button
13 MUTE button
When the car HD radio CD deck is on, press to toggle the mode between TUNER, CD, USB, AUX, or iPod.
Press to switch radio bands between FM1 - FM2 - FM3 - MW1 (AM1) - MW2 (AM2).
Press to mute the sound. Press again to restore the sound.
14
In CD mode, press to go to the previous track or next track. Press and hold for fast reverse or fast forward.
In radio mode, press to search for a station. Press three times to automatically scan for the next available station.
(previous) button
(next) button
15 VOL (volume) knob/
SEL button
Turn clockwise to increase the volume. Turn counterclockwise to decrease the volume.
Press to select the sound mode you want. Choices include VOL (volume - default), BAS (bass), TRE (treble), FAD (fader), and BAL
(balance). When you select a sound mode, turn the VOL knob to adjust.
Press and hold for three seconds to cycle through LOUD OFF, CLOCK OFF, or BEEP ON. See “Using the HD radio CD deck - basic
operation” on page 6 for an explanation of these features.
16
Press to eject the CD after releasing the front panel.
(eject) button
17 RESET button
Press to reset the CD deck to factory settings.
18 CD slot
After releasing the front panel, insert the CD into this slot, label side up, to begin playback.
3
NS-HD5113 Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
Remote control
#
Description
Function
12
In radio mode, press to tune the radio to a higher
frequency. Press for more than three seconds to
automatically scan for stations.
Search forward
1
In CD playback mode, press to select the next track.
Press and hold to search forward.
HD
2
3
13
Press to decrease the volume.
Volume down
14 ITAG button
15 LOUD button
16 MUTE button
Press to iTag a selection on the radio.
Press to activate the loudness feature.
10
11
MODE
Press to mute the sound. Press again to restore the
sound.
4
5
12
13
BAND
Installing your car HD radio
CD deck
ITAG
6
7
14
15
SCAN
Installation method 1 - DIN front mount
To install the car HD radio CD deck using the DIN
front mount:
16
8
1 Slide the mounting sleeve into the opening you
have prepared in the dashboard.
NS-HD5113
Opening size
7.16 in (182 mm) × 2.1 in (53 mm)
9
#
Description
Function
1
PWR button
Press to turn the car HD radio CD deck on. Press again
to turn the it off.
2
3
HD button
Press to turn HD radio on or off.
MODE button
When the car HD radio CD deck is on, press to toggle
the mode between TUNER, CD, USB, AUX, and iPod.
4
SEL/MENU button
Press to cycle through sound modes. Choices include
VOL (volume - default), BAS (bass), TRE (treble), FAD
(fader), and BAL (balance). When you select a sound
mode, turn the VOL knob to adjust up or down.
2 When the mounting sleeve is in the correct
position, bend several mounting claws outward
to achieve a tight fit and lock the mounting
sleeve into place.
5
6
BAND button
AMS button
Press to switch radio bands between FM1 - FM2 -
FM3 - MW1 (AM1) - MW2 (AM2).
In radio mode, press briefly to scan each stored station
for five seconds. Press and hold to store station
presets (six for each radio band).
7
8
SCAN button
DISP button
In radio mode, press to select stations automatically.
Press to display the time. Press Volume up to
adjust the hours, and Volume down to adjust the
minutes. See “Setting the time” on page 7.
In MP3 mode, press to display ID3 information.
9
Number buttons
In radio mode, press to access station presets in each
(radio)/Playback controls band.
(CD)
In CD playback mode, press the following:
•
•
•
•
•
•
1/
(play/pause)
2/INT (introduction)
3/RPT (repeat)
4/RDM (random)
5/DOWN
6/UP
10
11
Press to increase the volume.
Volume up
Search back
In radio mode, press to tune the radio to a lower
frequency. Press for more than three seconds to select
stations automatically.
In CD playback mode, press to select the previous
track. Press and hold to search backward.
4
Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
3 Connect the antenna, the main wire harness
(see “Wiring your car HD radio CD deck” on
page 5), and the rear mounting bolt (if
necessary to support your CD deck). Leave the
iPod wire (see “Wiring your car HD radio CD
deck” on page 5) accessible.
4 Fasten the brackets to the mounting location in
your car’s dashboard or console.
Wiring your car HD radio CD deck
Connect the wires to the back of the CD deck as
shown in the following illustration. You must wire
the main wiring harness prior to installing the CD
deck into the dashboard.
Caution
4 Connect the antenna, the main wire harness
(see “Wiring your car HD radio CD deck” on
page 5), and the rear mounting bolt (if
necessary to support your CD deck). Leave the
iPod wire (see “Wiring your car HD radio CD
deck” on page 5) accessible.
Be very careful to wire the main wiring harness
correctly. If you wire it incorrectly, or fail to properly
insulate the connections, you could damage the car
HD radio CD deck, your speakers, your car, or all of the
above.
5 Slide the car HD radio CD deck into the
mounting sleeve until it clicks into place.
Removing the CD deck (DIN installation)
To remove the CD deck:
1 Remove the outer trim frame from the CD deck.
2 Insert the keys (supplied) into the sides of the
CD deck (as shown) until they click and release
the internal locks, then slide the deck out of the
mounting sleeve.
6 Secure the rear mounting bolt to the firewall or
other sturdy support using the back strap (if
necessary).
Installation method 2 - screw mount
Note
Installing the front panel
The outer trim frame, the hooks, and the mounting
sleeve are not used for this installation method.
To install the front panel:
To install the car HD radio CD deck using the
screw holes:
1 Put notch A onto shaft B, then press gently into
the right side of the head unit.
1 Remove the hooks from the sides of your CD
Shaft B
deck.
Brackets supplied with your car
Notch A
Remove the hooks from both sides of your
CD deck
2 Mount the brackets to the sides of the CD deck
using two screw holes on each side.
5
NS-HD5113 Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
Antenna
iPod wire (white +5V)
AUX In (black)
Left (white)
Right (red)
Front RCA (dark grey)
Rear RCA (light grey)
Left (white)
Right (red)
Left (white)
Right (red)
Hole for
mounting
bolt
Red
Ignition key
Yellow
Black
Choke
box
Memory backup 12V
Negative ground
Blue
To power antenna
- Violet/Black
- Green/Black
Right rear speaker
Right front speaker
Left rear speaker
+ Violet
+ Green
- White/Black
- Grey/Black
Left front speaker
+ Grey
+ White
2 Slide the front panel to the right, then onto the
shaft on the left side of the head unit, then
rotate the front panel up until it closes.
Using the HD radio CD deck - basic operation
To use the HD radio CD deck:
1 Press (power), or PWR on the remote control,
to turn on the HD radio CD deck (inserting a CD
or USB device also turns on the deck).
2 Press MODE repeatedly to toggle the mode
between TUNER, CD, USB, AUX, or iPod.
3 Make the following adjustments, according to
your taste:
• Turn the VOL/SEL knob to adjust the volume
(clockwise to increase/
To remove the front panel:
counterclockwise to decrease), or press
1 Press the REL button on the front panel. The
Volume up or Volume down on the
remote control.
panel rotates outwards on the bottom hinges.
• Press MUTE to mute the sound. Press again to
2 Slide the front panel to the right and take it off
the hinge on the left side of the head unit, then
remove the front panel.
restore the sound to the previous setting.
• Press LOUD on the remote control to turn on
the loudness feature. “LOUD” appears on the
LCD and the low frequency of the sound is
enhanced. Press LOUD again to turn off this
feature.
• Press VOL/SEL to select the sound mode you
want. Choices include VOL (volume - default),
BAS (bass), TRE (treble), FAD (fader), and BAL
(balance). When you select a sound mode,
turn the VOL/SEL knob to adjust. Pressing the
SEL/MENU button and up or down on
the remote control performs the same
function.
• Press EQ/ITAG to cycle through the available
sound preset modes. Choices include POP,
JAZZ, CLASSIC, ROCK, and NOR(mal).
Using your car HD radio CD
deck
Note
After completing the installation, or after
disconnecting or replacing your car’s battery, when
you are ready to use the car HD radio CD deck, open
the front panel, then press the RESET button on the
head unit with a pointed object (such as ball-point
pen) to set the unit to initial status.
You can also press RESET if an error occurs on the
LCD. Pressing RESET erases your presets and the
current time on the display.
6
Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
• Press and hold VOL/SEL on the head unit for
three seconds to cycle through LOUD OFF,
CLOCK OFF, BEEP ON.
• LOUD–Turn the VOL knob to toggle between
LOUD ON and LOUD OFF. Pressing the LOUD
button on the remote control performs the
same function.
• CLOCK OFF–Turn the VOL knob to choose
between CLOCK ON and CLOCK OFF. Clock
off shuts the clock off.
• BEEP ON–Turn the VOL knob to choose
between BEEP ON and BEEP OFF (Beep On:
Radio beeps when buttons are pressed. Beep
Off: Radio does not beep when buttons are
pressed.) Pressing the SEL/MENU button and
up or down on the remote control
performs the same function.
• Press 2/INT to play the first 10 seconds of each
track on the disc. INT appears on the LCD, as
well as the track number and elapsed time.
When you get to the track you want, press
2/INT again to play it.
• Press 3/RPT to repeat the current track. Press
3/RPT again to repeat the entire CD. Press
3/RPT again to resume normal playback.
• Press 4/RDM to play the tracks in random
order (shuffle). Press 4/RDM again to resume
normal playback.
• In MP3 mode, press 5/DN to go back 10 tracks
on the disc, or press 6/UP to go forward 10
tracks on the disc.
2 To eject the CD, press REL to open the front
panel, then press EJECT. The car HD radio CD
deck automatically switches to TUNER mode
when the CD is ejected.
Note
-OR-
If no changes are made within three seconds, the car
HD radio CD deck exits the adjustment mode.
To remove a USB device pull it straight out of the
USB port, then replace the USB port cover. The CD
deck reverts to TUNER mode.
• In TUNER and AUX modes, press DISP to
display time information, press again to return
to normal display.
Searching for tracks in MP3 or USB mode
4 To turn the CD deck off, press and hold
(power), or PWR on the remote control, until it
turns off.
To search for tracks on an MP3 disc or USB
device:
1 Press AMS to enter the initial search mode. The
LCD shows MP3 *.
Setting the time
2 Rotate the VOL/SEL knob to choose the track
you want to play, then press VOL/SEL to play
the track.
To set the time:
1 Press and hold DISP until the two dots in the
middle of the clock stop blinking.
Searching for files in MP3 or USB mode
2 Press
left to adjust the hours, and
right to
To search for files on an MP3 disc or USB device:
adjust the minutes.
1 Press AMS three times to enter the file search
3 Press DISP twice display time information, press
mode. The LCD shows the folder’s name.
again to return to normal display.
2 Rotate the VOL/SEL knob to select the file you
want, then press VOL/SEL to play that file.
Note
You can also use the DSP button with the VOL/SEL
knob on the front panel to perform the same
operation.
Searching for characters (file names) in MP3 or USB
mode
In this example, we are searching for file name
cx.MP3 on the disc.
Using the CD player
To use the CD player:
To search for file names on an MP3 disc or USB
device:
1 Press AMS twice times to enter the character
(file name) search mode. The LCD shows a
blinking *.
1 Open the front panel and insert a CD/MP3 disc
(label side up) in the CD slot, or remove the port
cover and insert a USB device into the USB port.
The CD deck automatically turns on and
switches to CD (or USB) mode.
2 Press VOL/SEL. The LCD shows a blinking A (the
Note
first letter of the file name).
If a CD/MP3 or USB device is already inserted, press
3 Rotate the VOL/SEL knob until a blinking C
appears on the LCD, then press VOL/SEL to
select it as the first letter of the file name.
MODE to switch to the mode you want.
• To go to the next or previous track, press
Note
(next) or
(previous), or press
left or
If you press VOL/SEL more than .5 seconds, the first
file that begins with C is played.
right on the remote control, respectively.
• To fast forward or fast reverse the CD (or USB),
press and hold
(previous), or
the remote control, respectively.
(next) or press
SEARCH or SEARCH on
CA now appears on the LCD, with the A blinking.
4 Rotate the VOL/SEL knob until X is blinking on
the LCD, then press and hold VOL/SEL to select
that letter and file.
• Press 1/
Press 1/
(play/pause) to pause playback.
(play/pause) again to resume
playback. Press and hold 1/
(play/pause)
for one second to go to the first track on the
disc.
7
5 Press VOL/SEL and file cx.MP3 is played.
2 Press
(next) or
(previous), or
SEARCH or
SEARCH on the remote
Note
control, to tune the radio up or down.
3 Press HD again to turn off HD Radio. HD-SEEK
OFF appears on the LCD.
For clarity, the example above uses simple character
files. In actual operation, longer file names are
typically used, possibly requiring several more steps
to find the file you are looking for.
Playing your iPod through your HD radio CD
deck
Using the radio
To use the radio:
To play your iPod through your HD radio CD
deck:
1 Connect your iPod to the iPod wire in the back
of the radio. See “Wiring your car HD radio CD
deck” on page 5 for the location of the wire.
1 Press (power), or PWR on the remote control,
to turn on the HD radio CD deck.
2 Press MODE repeatedly to select TUNER.
3 Press BAND to cycle through the following
bands:
2 Press (power), or PWR on the remote control,
to turn on the HD radio CD deck.
FM1 - FM2 - FM3 - MW1 (AM1) - MW2 (AM2).
3 Press MODE repeatedly to select iPod.
• To manually tune the radio—Press
(next) or
• To go to the next or previous track, press
(previous) on the head unit, or
SEARCH on the remote
(next) or
(previous), or
SEARCH or
SEARCH or
SEARCH on the remote control, respectively.
control for more than three seconds (until
MANUAL appears on the LCD, then press that
button again to select a station with a higher
or lower frequency, respectively.
• To fast forward or fast reverse the track, press
and hold
SEARCH or
control, respectively.
(next) or
(previous), or
SEARCH on the remote
• To automatically tune the radio—When
manual tuning does not work, the radio
switches to automatic tuning and AUTO
appears on the LCD. Press
(previous), or SEARCH or
the remote control, for more than three
seconds. The radio tunes to, and plays, the
next available station (up or down,
respectively).
• To automatically scan for stations — Press
SCAN on the remote control. The radio
automatically tunes up through the available
radio stations, pausing at each station for five
seconds. Press SCAN again to stop scanning
and listen to a station.
• Press 1/
(play/pause) to pause playback.
(play/pause) again to resume
Press 1/
(next) or
SEARCH on
playback.
• Press 3/RPT to repeat the current iPod track.
Press 3/RPT again to repeat all tracks. Press
3/RPT again to resume normal playback.
• Press 4/RDM to play the iPod tracks in random
order (shuffle). Press 4/RDM again to resume
normal playback.
• Press DISP to display information about the
current track playing.
• Press 5/DN to search for a specific track on
your iPod.
• Press 6/UP to go back to the previous
directory on your iPod.
• To automatically store stations in preset
memory—Press and hold AMS for more than
three seconds. The radio automatically scans
the available stations and stores the six
4 To exit iPod mode, remove your iPod. Your HD
radio CD deck reverts to radio mode.
strongest stations in presets 1 through 6.
Using iTAG
• To manually store stations in preset
memory—Tune to the desired station, then
press a number button for more than two
seconds (until the LCD shows the number).
The station is stored as a preset using that
number button. Repeat for each button, in
each band.
• To tune to a preset channel—Select the
band you want, then press the desired preset
button (1-6).
• To play each of your preset channels for a
few seconds—Press AMS. Press AMS again,
or a number button, to play a station while it is
being previewed.
ITAG lets you capture information about a song
playing on the radio.
To use iTAG:
1 Press and hold EQ/ITAG to capture information
about a song currently playing on the radio.
Your HD radio CD deck stores the information.
2 Connect your iPod to your HD radio CD deck.
Your radio uploads the iTAG information to your
iPod.
Using your car HD radio CD deck in the AUX
mode
4 To turn the car HD radio CD deck off, press and
hold (power), or PWR on the remote control,
until it turns off.
To use your CD deck with an external audio
device:
1 Press (power), or PWR on the remote control,
Listening to HD Radio stations
to turn on the car HD radio CD deck.
To listen to HD Radio:
2 Connect an optional portable audio source to
the AUX jack on the front panel.
3 Press MODE repeatedly to select AUX.
1 In radio mode, press and hold HD until the LCD
shows HD-SEEK On.
4 Play music on the device to listen to it through
your car speakers.
8
Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
Troubleshooting
Maintaining your system
Caution
Note
Do not try to repair the CD car deck yourself. Doing
so will void your warranty.
The mechanical part of this car HD radio CD deck
contains self-lubricating bearings and must not be
oiled or lubricated.
Replacing the fuse
Make sure the amperage of the new fuse matches
the specified value when replacing the fuse. If the
fuse is blown, check the power connection and
replace the fuse with a new one. If the same
problem occurs, there may be a problem with your
car’s electrical system. In such cases, consult the
nearest service dealer.
Problem
No sound or power Volume too low.
The fuse is blown.
Possible cause
Solution
Turn up the volume.
Replace the fuse. (Only use a
replacement fuse with the
correct amperage.)
The CD does not play The CD was incorrectly inserted. Reinsert the CD, label side up.
The CD is defective.
Try another CD.
Caution
Dirty or damaged disc.
Clean the disc. If the disc is
damaged too badly to play, it
must be replaced.
Never use a fuse with the rated amperage more than
that supplied to your car HD radio CD deck,
otherwise it will damage the car HD radio CD deck.
No sound
Mute on.
Press the MUTE button to
cancel mute.
Replacing the remote control battery
Volume adjusted too low.
Adjust the volume upwards.
When the remote control stops working, or the
range gets very limited, replace the lithium battery
with a new button cell (CR2025). Make sure of the
battery polarity before replace.
Memory contents Unknown.
lost
Disconnect, then reconnect the
power wire or battery. Press
the RESET button.
CD cannot be
inserted
Another CD is already loaded
into the car HD radio CD deck.
•
Press the EJECT
button to remove the
other CD.
Press the RESET
button and try again.
To replace the battery:
1 Press and hold the latch while gently pulling out
•
the battery holder.
CD skips during play Dirty or damaged disc.
Clean the disc. If the disc is
damaged too badly to play, it
must be replaced.
Poor radio reception The antenna may not be fully
extended or correctly connected.
•
•
Fully extend the
antenna.
Check the antenna
connections.
The antenna is broken.
Replace the antenna.
The antenna is poorly grounded. Check the antenna ground and
repair it if necessary.
Note
If any problem persists after checking the above list,
consult your nearest service dealer. Never attempt to
disassemble the unit by yourself.
2 Insert the battery into the battery holder with
the positive (+) side up.
3 Insert the battery holder into the remote
Playable discs
control.
Your HD radio CD deck can only play the following
discs:
Precautions when using lithium batteries
• Always keep the lithium batteries out of your
children’s reach. In case a battery is swallowed,
see a doctor immediately.
Disc type
CD
Label
Material
Audio
Size
12 cm
• Clean the battery with a dry cloth to make sure of
a good connection.
MP2
Audio
12 cm
• Make sure that you install the battery with the
correct polarity.
• To prevent a short circuit, do not use metal
tweezers to hold the battery.
USB
iPod
Audio
Audio
Version 2.0 or lower
Version 2.0 or lower
Warning
Improper handling of the battery may result in an
explosion. Do not charge it, disassemble it, or throw
it into a fire.
9
NS-HD5113 Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
• Do not expose discs to direct sunlight, high
humidity, high temperatures and dust. Prolonged
exposure or extreme temperatures can warp the
Cleaning the connectors
If the connector between the head unit and the
front panel is dirty, it may cause the car HD radio CD
deck to operate poorly. To avoid such problems,
open the front panel and clean the connectors on
the head unit and the front panel with an alcohol
swab. Clean the connections gently to avoid
damaging them.
disc.
• Do not attach adhesive tape or stickers to the disc
label. Also, do not affix labels to or write anything
on either side of the disc. Sharp writing
instruments or ink may damage the surface.
Note
Note
A disc may became somewhat scratched (although
not enough to make it unusable) depending on how
it is handled. These scratches are not an indication of
any problem with the car HD radio CD deck.
•
•
For safety, always turn your car off and remove
the keys before cleaning.
Never touch the connectors directly with your
fingers.
Head unit (in dashboard)
Specifications
GENERAL
Supply voltage
Load impedance
Max power output
Tone controls
14.4 V DC (11-16 V allowed)
4 ohms per channel
40 W × 4
8 dB
Bass 100 Hz
Treble 10 KHz
Dimensions (approx.)
Mounting (approx.)
7.56 × 7 × 1.97 inches
(192 × 178 × 50 mm) (d/w/h)
6.65 × 7.16 × 2.1 inches
(169 × 182 × 53 mm) (d/w/h)
Weight (approx.)
FM tuner
3.86 lbs. (1.75 kg)
Front panel (open)
Frequency range
IF
87.5 ~ 107.9 MHz (USA)
10.7 MHz
Usable sensitivity
Signal-to-noise ratio
Stereo separation
AM tuner
15 dBuV
Cleaning CDs
63 dB
Using a soft cleaning cloth, wipe the CD from the
center outwards. If a CD is especially dirty, use a soft
cloth slightly moistened with isoprophyl (rubbing)
alcohol.
30 dB (1 KHz)
Frequency range
IF
530 ~ 1710 KHz (USA)
450 KHz
Usable sensitivity
CD player
28 dBuV (-20 dB)
Signal-to-noise ratio
Separation
79 dB (1 KHz)
60 dB (1 KHz)
0.5%
Distortion
Due to continuous product improvement, specifications and
design are subject to change without prior notice.
Caution
Legal notices
Do not use solvents such as benzene, thinners,
commercial cleaning fluids, or anti-static sprays
designed for vinyl records.
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of
Keep the following in mind:
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
• Treat the disc carefully. Handle the disc only by its
edges. Never allow your fingers to come in
contact with the shiny, unprinted side of the disc.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
• If a disc skips or gets stuck on a section of the disc,
it is probably dirty or scratched.
• Discs should be stored in their cases after each
use to avoid damage.
10
Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
CEA 2006 Power Output: 18 Watts RMS x 4
Channels at 4 Ohms and £ 1% THD+N
CEA 2006 Signal to Noise Ratio: 79 dBA (reference:
1 Watt into 4 Ohms)
"Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
11
Insignia NS-HD5113 Car HD Radio CD Deck with USB Port
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
One-Year Limited Warranty
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new NS-HD5113 (“Product”), that the Product
shall be free of defects in the original manufacture of the
material or workmanship for a period of one (1) year from the
date of your purchase of the Product (“Warranty Period”). This
Product must be purchased from an authorized dealer of
Insignia brand products and packaged with this warranty
statement. This warranty does not cover refurbished Product. If
you notify Insignia during the Warranty Period of a defect
covered by this warranty that requires service, terms of this
warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. The purchase date is printed on the
receipt you received with the Product.
Contact Insignia:
For customer service please call 1-877-467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy
Enterprise Services, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective
owners.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a screen
25 inches or larger, call 1-888-BESTBUY. Call agents will diagnose
and correct the issue over the phone or will have an
Insignia-approved repair person dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the
antenna
Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
•
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been
altered or removed
•
•
•
13
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
09-0642
|