OPERATOR’S MANUAL
CL0443X2XXXXXXXX
2-15-10
RELEASED:
(REV. 01)
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
INCLUDE MANUALS: AF0443XXX Pump manual (pn 97999-1501), 67075 Cart (pn 97999-603), 65184X-X Follower
manual (pn 97999-605) & S-636 General Information Manual (pn 97999-636).
4 1/4” AIR MOTOR
CL0443X2XXXXXXXX
43:1 RATIO
4” STROKE
PUMP AND CART PACKAGE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Use only genuine ARO® replacement parts to assure com-
patible pressure rating and longest service life.
637489 for repair of Air motor.
y
y
y
63729X-XXX for repair lower pump section.
MODEL DESCRIPTION CHART
CL 04 43 X 2 XXXXX XX X
Package
CL- Cart Mount with Lift
Air Motor Size
4 - 4 1/4”
Pump Ratio
43 - 43:1
Check Type / Wetted Materials
S – Primer Piston, Carbon Steel Nickel-Plated
T – Primer Piston, 300 Series Stainless Steel
Container Suitability
5 Gallon (35 lbs)
Lower Pump End Options
Refer to pump model operator’s manual
Figure 1
Follower Assembly
GENERAL DESCRIPTION
E3 - 651840-1
E1 - 651840-2
E5 - 651840-3
S3 - 651841-1
EC - 66731
EB - 66731-2
A8 - 67347-1
A7 - 67347-2
T8 - 67347-11
T7 - 67347-12
By delivering a smooth, continuous bead of the proper size,
an ARO system helps the operator maintain both production
rate and produce high quality standards. Maintained quality
standards assures that the material benefits are realized. To
further maximize operator production time, the ARO system
has a built-in lift / ram feature for quick and easy drum
changeover and easy lifting of the pump assembly from the
container.
EA - 66731-1
Package Option
0 - None
1 - Integrated ball valve regulator on pump
ARO systems are totally enclosed, sealing the material in
the system from air and moisture, preventing premature
cure-out of the material. This allows for either continuous or
intermittent use of the system and allows the need for daily
system clean-up.
Built-in lift capability allows for quick drum changeover and
easy lifting of pump assembly from container.
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET -BRYAN, OHIO 43506
© 2010
CCN 15337355
(800) 495-0276 FAX (800) 892-6276
y
ꢀ
PARTS LIST / CL0443X2XXXXXXXX
26.600”
Needle Valve
Cart / Lift
Air Inlet
27.500”
Thumb Screw
Y6-63-C Screw (4)
Y13-6-C Washer (4)
* AF0443XXXXXXX-1 Pump
67075-B
Cart Assembly
* AF0443S21RN41-1 Pump for
CL443S21XXXXXXX model
* AF0443T21RN41-1 Pump for
CL443T21XXXXXXX model
Follower Plate
Air Supply Valve
Material Outlet
1/2-14 NPT (f)
50.600”
Vent Plug
Follower Assembly
(refer to model description
chart on page 1)
Drum Stop
Figure 2
CL0443X2XXXXXXXX (en)
Page 3 of 4
DIMENSIONS
20.031“
70.612“
50.581“
20.519“
26.582“
Figure 3
PARTS LIST / CL0443X2XXXXXXXX
Adapter
Description
Qty
(1)
(1)
Part no
67446
67447
(67347-1, 67347-2 Followers)
Adapter
(67347-11, 67347-12 Followers)
Figure 4
PN 97999-1538
CL0443X2XXXXXXXX (en)
Page 4 of 4
|