OPERATOR’S MANUAL
TP1044S5XXXXXXXX
5-12-10
RELEASED:
(REV. 01)
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
INCLUDE MANUALS: AF1044SXXXXXX-XX-X Extrusion Pump (pn 97999-1522), 66516-X Follower Assembly
(pn 97999-854), 67195-X Follower Assembly (pn 97999-841), RM552S-XX Heavy Duty Two Post Lift / Ram (pn
97999-1445), & S-636 General Information (pn 97999-636).
10” AIR MOTOR
EXTRUSION PUMPING SYSTEM
44:1 RATIO
For use with 55 gallon drums
6” STROKE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
The original language of this manual is English.
SERVICE KITS
TP10445SXXXXXXXX EXTRUSION SYSTEM
104468 for repair of filter section of P39124 -100 filter / regulator.
104302 for repair of regulator section of P39124-100 filter / regulator.
104326 for repair of fi lter section of P39344 -100 fi lter/regulator..
637489 for repair of air motor section.
637466 for repair of lift / ram seals.
637348-XXD for repair of lower pump end section.
MODEL DESCRIPTION CHART
TP 10 44 S 5 XXXXX XX X
Packing Type
TP - Two Post
Air Motor Size
10 - 10”
Pump Ratio
44 - 44 : 1
Check Type / Wetted Materials
S - Primer Piston, Carbon Steel Nickel-Plated
Container Suitability
55 Gallon (400 lbs)
Pump Options
Refer to pump Operator’s Manual
Follower Assembly
Figure 1
AC - 66517
TB - 66517-7 TN - 67196-6
AA - 66517-1 AM - 67196-1 TV - 67196-7
AB - 66517-2 AN - 67196-2 AS - 67196-8
TC - 66517-5 AV - 67196-3 TS - 67196-9
TA - 66157-6 TM - 67196-5
GENERAL DESCRIPTION
By delivering a smooth, continuous bead of the proper size, an
ARO® system helps the operator maintain both production rate
and produce high quality standards. Maintained quality standards
assures that the material benefits are realized. To further maximize
operator production time, the ARO system has a built-in lift / ram
feature for quick and easy drum changeover and easy lifting of the
pump assembly from the container.
Package Options
0 – None - Basic control for Ram only
2 - Advanced Pump and Ram controls
ARO systems are totally enclosed, sealing the material in the sys-
tem from air and moisture, preventing premature cure-out of the
material. This allows for either continuous or intermittent use of the
system and allows the need for daily system clean-up.
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
© 2010
CCN 15339062
(800) 495-0276 FAX (800) 892-6276
y
ꢀ
PARTS LIST / TP1044S5XXXXXXXX
Y45-9-C Reducing
Bushing
Y43-5-C Pipe
96927 Elbow
Y44-65-C Nipple
94810 Muffler
AF1044S1XXXX Pump
Assembly
RM552S-XX Two Post
Lift / Ram
Y6-66-C Screw (4)
Y12-106-C Nut (4)
Y14-616 Lock
Washer (4)
Y6-65-C Screw (4)
Y12-6-C Nut (4)
Y14-616 Lock
Washer (4)
92362 Bracket (2)
(see page 4 for Bracket
Assembly)
96614 (1 1/4-11 1/2 NPT)
Nipple
Y43-317-C (1 1/4-11 1/2 NPT)
Elbow
94980-XXX-X
Tubing (5/16” o.d. x 44”) ꢀ
ꢀ 94980-100 Bulk Tubing
(5/16” o.d. x 100”)
Y99-84-C Screw (3)
59474-158 Connector
Follower Assembly
(see model description
chart on page 1)
Figure 3
TP1044S5XXXXXXXX (en)
Page 3 of 8
PARTS LIST / TP1044S5XXXXXXXX
66353-1 Bracket Assembly
92362
Support Bracket
Y6-66-C Screw
Y14-616 Lock Washer
Y12-106-C Nut
Y6-65-C Screw
Y14-616 Lock Washer
Y12-6-C Nut
Figure 4
Page 4 of 8
TP1044S5XXXXXXXX (en)
DIMENSIONAL DATA
24.000”
22.000”
25.003”
600
1.000”
1.500”
Ø .562”
(4) places
36.500”
39.500”
41.943”
61.465”
99.215”
(fully extended)
Figure 5
TP1044S5XXXXXXXX (en)
Page 5 of 8
NOTES
Page 6 of 8
TP1044S5XXXXXXXX (en)
NOTES
TP1044S5XXXXXXXX (en)
Page 7 of 8
PN 97999-1576
Page 8 of 8
TP1044S5XXXXXXXX (en)
|