3.5” Combo ION™ Drive
Hi-Speed Portable External Hard Drive
FireWire 800/USB 2.0
User Manual
®
Table of Contents
Package Contents..................................................................................................................................
Overview.................................................................................................................................................
Features.................................................................................................................................................
Requirements.........................................................................................................................................
Introduction.............................................................................................................................................
Pictorial Introduction...............................................................................................................................
Installation...............................................................................................................................................
Troubleshooting......................................................................................................................................
Care & Handling......................................................................................................................................
Technical Support...................................................................................................................................
Appendix.................................................................................................................................................
Specification...........................................................................................................................................
Radio & TV Interference Statement.......................................................................................................
Limited Warranty.....................................................................................................................................
02
03
04
05
06
08
10
20
22
23
24
25
26
27
Package Contents
This package contains:
1- 3.5” ION™ Drive
1- Hi-Speed USB 2.0 (Type A to Mini-B) Cable
1- FireWire® 9 pin to 9 pin cable
1- Quick Start Guide
1- IOGEAR® Installation CD with Electronic Manual
1- Warranty / Registration Card
If any of the items are missing or damaged, please contact your dealer immediately.
2
Overview
The ION™ Drive is the latest, innovative FireWire® 800 and Hi-Speed USB 2.0 solution developed by IOGEAR®.
The ION™ Drive offers a complete high-speed storage solution at the fraction of the cost of other external
Hard Drives.
Setup is fast and easy. Simply plug-in the drive, install the software, and you’re ready to go. The ION™ Drive
offers a feature rich interface, complete with the latest in Hi-Speed technology.
IOGEAR® brings the next generation of USB and FireWire® to your computer connectivitiy. You will enjoy the
convenience and reliability that have made these technologies industry standard.
FireWire® 800 is the latest advancement in digital connectivity technology. With data transfer rates up to 800
Mbps, FireWire® leads the way in speed and interconnectivity. FireWire® 800 is fully backwards compatible
with todays current FireWire® 400 devices.
USB 2.0 is the next generation of USB connectivity, providing additional bandwidth thus broadening the range
of peripherals that may be attached to your computers; it allows you to move data at a blazing rate of 480
Mbps (Megabits per second), and is fully backward compatible with the first generation of USB devices. With
the increase in speed, USB 2.0 offers increased functionality, allowing more devices to share the increased
bandwidth.
The ION™ Drive is the right choice for your external storage environment.
3
Features
• Transfer pictures, music, and data at speeds up to 800 Mbps – Transfer 1 GB in under 15 seconds
• Ideal for backup, storage expansion, file sharing, software installation, and data management
• 4 connectivity solutions in one (FireWire® 800, FireWire® 400, USB 2.0, and USB 1.1)
• Hot-plug capable, hot swappable, and Plug-N-Play
• Preformatted for your convenience so you are up and running in no time (for those with preinstalled drives)
• FireWire® 800 interfaces – supporting data transfer rates of up to 800 Mbps
• USB 2.0 interface – supporting high speed data transfer rates of up to 480 Mbps
• Backward compatible with USB 1.1 and FireWire® 400 specifications
• Three-year limited warranty
4
Requirements
To access FireWire® 800 and USB 2.0 speeds, your computer system must be FireWire® 800 and/or Hi-
Speed USB 2.0 enabled. The 3.5” Combo ION™ Drive will work at FireWire® 400 and/or USB 1.1 speeds
with FireWire® 400 and/or USB 1.1 enabled computers.
For Mac Users
For PC Users
• Mac OS 9.x*
• PC Compatible, 200MHz or greater
• Windows® 98SE*, ME*, 2000, XP
• Minimum 64MB RAM
• Available FireWire® 800 port or 400 port
• Available USB 2.0 or 1.1 port
• Mac OS X (10.2) or greater
• Available FireWire 800 or 400 port
• Available USB 2.0 or 1.1 port
Drivers are provided by the supporting OS or host card software.
* FireWire 800 - Mac OS X (10.2) or greater, Windows 2000 & XP
FireWire 400 - Mac OS 9 or greater, Windows 98SE, ME, 2000 & XP
USB 2.0 - Mac OS X (10.2) or greater, Windows 2000 & XP
USB 1.1 - Mac OS 9 or greater, Windows 2000 & XP
Accessories / Additional Products
8-in-1 Hi-Speed USB 2.0 Memory Bank™ (GFR280)
KVMP™ Extreme Switch – 2 and 4 port USB PS/2 KVMP™ switch (GCS1732/34)
BOSS™, Router, FTP Server, NAS, VPN end point (GNS1000)
5
Introduction
Introduction of the ION™ Drive’s UnderlyingTechnology
FireWire® 800 and Hi-Speed USB 2.0 are the backbone of our ION™ Drive. USB 2.0 is the next generation
in USB connectivity, providing additional bandwidth; thus, broadening the range of peripherals that may be
attached to your computers. USB 2.0 will move data at the blazing rate of 480 Mbps (Megabits per second),
and is backward compatible with the first generation of USB 1.1 devices. With this increase in speed, USB
2.0 offers speed, allowing more devices to share the increased bandwidth.
With the increase in demand for USB 2.0 products, IOGEAR® decided to provide its customers with a total
solution. We have taken some of the top peripherals on the market and upgraded them to the new USB 2.0
standard.
The advantage of FireWire can be summed up in three words: speed, speed and more speed! At 800Mbps,
FireWire® 800 has more than double the usable bandwidth of USB 2.0, which makes it the perfect choice
for high-speed storage and serious video capture. The extra speed of FireWire® 800 over USB 2.0 makes
FireWire much more suitable for bandwidth-intensive applications like video and graphics, which often
consume hundreds or even thousands of megabytes of data per file. For instance, single hour of DV-format
video consumes roughly 13 thousand megabytes (13 GB).
Today’s connectivity standards are faster and easier to use than ever. Moving data at the blazing speed of
800Mbps and 480Mbps these allow high-speed devices to take full advantage of the bandwidth and reliabil-
ity offered by these new technologies.
6
Introduction
This manual contains information on the installation and capabilities of your new ION™ Drive.
In sections of the manual where sequential steps are listed, each action is listed with no indentation.
Additional text is included, but indented, to further explain each of these actions. A glossary has been added
at the end of the manual so you may look up unfamiliar terms.
A few things should be mentioned before explaining the installation procedure:
All IOGEAR® ION™ drives are tested prior to shipment to ensure product quality.
The connectors on a FireWire® 800 and Hi-Speed USB 2.0 cable are designed in such a way as to prevent
plugging the cable in upside down, backwards, or into a different type of connector.
At time of print, some computers do not have FireWire® 800 and Hi-Speed USB 2.0 capabilities. To ensure
optimum compatibility, please make sure your computer is FireWire® 800 and USB 2.0 compatible, or have
had an FireWire® 800 and USB 2.0 upgrade card added to your computer system.
7
Pictorial Introduction
FrontView
1
2
1. Power Light
2. On/Off Switch
3. ION™ Base
3
8
Pictorial Introduction
BackView
1. FireWire® 800 9-pin Port
1
2
3
2. Hi-Speed USB 2.0 Type-B Port
3. Power Port
9
Installation
If you purchased the enclosure only model (GHE835C), please follow these instructions on page 11 to
install your 3.5" Hard Disk Drive. OTHERWISE, PROCEED TO STEP 11.
WARNING: Opening an ION™ Drive with a built-in Hard Drive (GHD835C80, GHD835C120, etc...) WILL
VOID YOUR WARRANTY. For assistance with your hard drive, please contact your IOGEAR Service
Support representative.
10
Installation
Hardware Installation:
Attention! Please take all proper Electro Static Discharge (ESD) precautions during the installation of your
Step. 1 Please have the following ready
1 Phillips screw driver (not included in the package)
Step. 2 Remove Base
Remove Phillips screw from bottom edge of side panel.
11
Installation
Step. 3
Step. 4
Remove side panel in a backward direction.
Remove two screws in hard drive retention bracket.
12
Installation
Step. 5
Remove hard drive retention bracket from enclo-
sure. Slide in an upward direction towards the top
of the enclosure to free the drive bracket. Lift the
drive bracket out of the enclosure.
13
Installation
Step. 6 Inspect all the components again:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Side panel
Enclosure with one side panel attached
Drive bracket
One small screw
Two long screws with nylon collar
AC adapter
AC adapter cord
2
4
USB 2.0 A to B cable
FireWire (9-pin to 9-pin) cable
1
3
5
6
7
8
9
14
Installation
Step. 7
Attach the hard drive into the hard drive bracket.
Screw the four screws into the drive bracket that
were provided with the hard drive.
15
Installation
Step. 8
Attach the signal cable to the hard drive with bracket
attached. Attach the power cable to the hard drive in
the power socket. Place the bracket with drive
attached into the enclosure over the base plate. Line
up the holes in the bracket with the base plate
16
Installation
Step. 9
Step. 10
Place the side cover on the enclosure and secure
by sliding in forward direction. Now replace the
button screw.
Insert the two previously removed screws
through bracket, tighten to secure bracket to
base plate.
17
Installation
Step. 11
Step. 12
Place the ION™ Drive into the base.
Now simply plug your ION™ Drive into your computer.
Please chose your connectivity of choice; FireWire
or USB.
USB
Plug the USB Type-B end into your ION Drive, then
plug the USB Type-A end into your computer.
FireWire
Plug the FireWire 9-Pin end into your ION Drive, then
plug the FireWire 9-pin end (or 6-Pin end) into your
computer.
Once complete, plug the power adapter into the ION
Drive and plug the power plug into power adapter
and the power cord into a surge protected power
supply.
Note: For the best performance, please use the certified cables
that were provided with this product.
18
Installation
FAT32 only recognizes partition sizes of 32GB (GigaBytes)
or less. Therefore if you have an ION™ drive with a
preinstalled hard drive that is greater than 32GB, you will
likely see two, three, or more separate partitions on your
Desk-Top or within you’re “My Computer” folder.
Step. 13
Power on the ION™ drive.
Congratulations!You have completed the ION™ drive
installation process.
If you are running one of the Mac OS’s you can use the
drive utility to reformat the ION™ drive into one single
partition. It is recommended to format Mac Drives with
Apple’s HFS+ which can identify larger gigabyte size drives
and partitions.
Once your ION™ Drive has been turned on you
should see a new hard drive ICON (or ICON’s) on
your Desk-Top (Mac Only) or with in your “My
Computer” folder (PC Only).
Windows 2000 and XP can recognize both FAT32 and NTFS.
With NTFS you can reformat the ION™ drive into a single
partition. NTFS can identify larger gigabyte size drives and
partitions. Please use Windows “Computer Management” to
reformat your ION™ Drive.
Note:
IOGEAR® ION™ Drives are preformatted with FAT32. The
FAT32 format can be recognized by both Mac and PC
systems. FAT32 is compatible with Windows 98, ME, 2000,
XP, and Mac OS 8.6 and greater (Including 10.3).
Windows® 98, 98SE, and ME only recognize drives formatted
with FAT32.
19
Trouble Shooting
BasicTrouble Shooting
ION™
• Make sure you have Critical Updates from the Microsoft® Website at http://windowsupdate.microsoft.com;
then, click on “Product Updates,” select the latest Critical Update package for your Windows® OS, and
then click “Download.”
• Make sure the drive is turned on before you start-up your computer.
• Make sure your new IOGEAR® ION™ Drive is the only device hooked into the FireWire® 800 or USB 2.0 port.
• Do not use a hub or repeater in connecting your drive to the computer.
• Use the cable that was shipped with your ION™ Drive.
• Check all cable connections.
• Use other IOGEAR® cables if you have any extra.
Other Issues
At the very least, make sure your computer has all available updates provided by the manufacture of both
www.download.com. Upgrade your CPU firmware to the latest revision. Please read all text on the download
pages to determine which firmware update is appropriate for your computer.
20
Trouble Shooting
Notes:
All URLs are subject to change. If the URLs listed in this manual are no longer valid, you can find the majority
Seagate Trouble Shooting Tip
Set up the jumper on the Seagate drive to the secondary, submissive or slave position.
Setting up your drive:
If for some reason you need to re-partition your ION™ drive, you will need to keep in mind that FAT32 limits
the partition size that can be created, through the USB interface, to roughly 32GB when using the FAT32 file
system. If you have Windows 2000 or XP you can format the drive with NTFS which has no limit on the
partition size.
If you have Mac OS 9.2 or greater, you can format the drive with HFS+ which has no limit on the patition size.
Compatibility Note:
FAT32 is compatible with Windows 98/98SE/2000/ME & XP
NTFS is only compatible with Windows 2000 & XP
HFS+ is only compatible with Mac OS 8.6 or greater
Contacting IOGEAR® Service Support
If you are still experiencing problems using your IOGEAR® ION™ Drive, please follow the directions on pg. 23
on how to contact IOGEAR®’s Service Support department for your technical support needs.
21
Care & Handling
Your IOGEAR® storage device is a high performance FireWire® 800/Hi-Speed USB 2.0 HardDrive (ION™
Drive). The head that reads the information on the disk is a fragile piece of technology. Therefore, care must
be taken not to bump the ION™ Drive while it is operating. Please do not bump the ION™ Drive excessively
when the drive is turned off.
To insure maximum reliability of the ION™ Drive, please follow the guidelines listed below:
• DO NOT block the air circulation around the drive.
• DO NOT move or bump the drive while it is operating.
• DO NOT open the drive case for it will VOID your WARRANTY. (For those with pre-installed Drives)
• Keep all cables out of isles and off desktops where they can be hooked and pulled.
• Keep the drive firmly secured in the shipping container when shipping the drive.
• Keep the environment around the drive clean and free of excessive dust and chemicals.
• Use a damp cloth to clean the drive. NEVER put cleansers directly on the drive case.
• Use surge protectors with the drive.
• DO NOT expose the ION™ Drive to extreme temperatures.
• DO NOT expose the ION™ Drive to direct sun light for extended periods of time.
• DO NOT get the ION™ Drive wet.
• DO NOT place the ION™ Drive in an area with an excessive amount of dirt.
22
Technical Support
To help IOGEAR® customers obtain the highest level of performance from their ION™ Drive, IOGEAR®
OSD Opera-
Service Support team is available to answer your technical questions. Do not hesitate to call if you are having
tion
trouble getting your drive to work correctly. Service Support can be reached at IOGEAR® from 8am to 5pm
Pacific Standard Time, Monday through Friday or at the following address:
23 Hubble Drive Irvine, CA 92618
Please be ready to give a brief description of the problem, and what you were doing when the problem occurred,
before calling Service Support. The Service Support representative will be able to serve you much quicker if you
are prepared to answer the following questions listed below.
1) What version of OS are you using?
2) What type of computer are you using?
3) Can the problem be reproduced? If so, what are the steps necessary to reproduce the problem
4) When does the problem occur?
5) What have you already tried to get the problem resolved?
6) What is the purchase date and serial number of the drive?
7) Are you on a network? If so, what type of network is it?
8) Were any messages displayed on the screen when the error occurred? If so, what was the exact wording of the
message?
9) What type of data are you trying to transfer to and from your ION™ Drive?
23
Appendix
Glossary
Desktop - The background area on the computers monitor screen. This area also includes the menu bar.
Document windows are not part of the desktop; they sit on the desktop.
Icon - Symbols used to represent a particular object. For example a disk has an icon on the desktop which
represents the disk. When you double click the disk icon it tells finder to display information related to that disk.
Mount - Makes the computer aware of a disk.
Power Adapter Port - The plug on the ION™ Drive into which the power-cord is plugged into.
Service Support - The team of IOGEAR® employees dedicated to help you resolve your technical issues.
Spin down - The act of the disk inside the drive or cartridge ceasing its rotation.
Spin up - The act of the disk inside the drive getting up to the proper rotations per minute. The disk inside the
drive must spin at the proper speed for the disk to work.
24
Specification
Product Specification
25
Radio & TV Interference Statement
WARNING!!! This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause interference to radio communications. This equipment
has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in
a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in
which case the user at his own expense will be required to take whatever measures may be required to correct
the interference.
26
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCU-
MENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the
contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness
for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation without obligation to
notify any individual or entity of such revisions, or updates. For further inquires please contact your direct vendor.
27
|